Yukiharu YABUKI の tDiary

_ 天気

あめ

_ あさごはん

ベーカリーささの のサンドイッチ

_ 4th generation ipod + My machine

大学の事務にアルバイトに来ている人で 第4世代iPodをおもちの方がいた． 頼み込んで，usbでlinuxに接続するとどうなるか試させてもらった．以下dmsg

usb 1-1: new high speed USB device using address 5
ub: sizeof ub_scsi_cmd 60 ub_dev 924
uba: device 5 capacity nsec 50 bsize 512
uba: made changed
uba: device 5 capacity nsec 50 bsize 512
uba: device 5 capacity nsec 50 bsize 512
 /dev/ub/a:end_request: I/O error, dev uba, sector 0
Buffer I/O error on device uba, logical block 0
end_request: I/O error, dev uba, sector 2
Buffer I/O error on device uba, logical block 1
end_request: I/O error, dev uba, sector 4
Buffer I/O error on device uba, logical block 2
end_request: I/O error, dev uba, sector 6
Buffer I/O error on device uba, logical block 3
end_request: I/O error, dev uba, sector 6
Buffer I/O error on device uba, logical block 3
end_request: I/O error, dev uba, sector 4
Buffer I/O error on device uba, logical block 2
end_request: I/O error, dev uba, sector 2
Buffer I/O error on device uba, logical block 1
end_request: I/O error, dev uba, sector 0
Buffer I/O error on device uba, logical block 0
 unable to read partition table
 /dev/ub/a:end_request: I/O error, dev uba, sector 2
Buffer I/O error on device uba, logical block 1
end_request: I/O error, dev uba, sector 4
Buffer I/O error on device uba, logical block 2
end_request: I/O error, dev uba, sector 6
Buffer I/O error on device uba, logical block 3
end_request: I/O error, dev uba, sector 0
Buffer I/O error on device uba, logical block 0
 unable to read partition table
usbcore: registered new driver ub
usb 1-1: USB disconnect, address 5
usb 2-1: new full speed USB device using address 6
usb 2-1: device not accepting address 6, error -71
usb 2-1: new full speed USB device using address 7
usb 2-1: device not accepting address 7, error -71
usb 1-1: new high speed USB device using address 7
uba: device 7 capacity nsec 50 bsize 512
uba: made changed
uba: device 7 capacity nsec 29297520 bsize 512
uba: device 7 capacity nsec 29297520 bsize 512
 /dev/ub/a: [mac] p1 p2 p3
 /dev/ub/a: [mac] p1 p2 p3
devfs_mk_dev: could not append to parent for ub/a/part1
kobject_register failed for uba1 (-17)
 [] kobject_register+0x5b/0x60
 [] add_partition+0x119/0x150
 [] register_disk+0x186/0x1c0
 [] add_disk+0x4c/0x60
 [] exact_match+0x0/0x10
 [] exact_lock+0x0/0x20
 [] ub_probe+0x292/0x310 [ub]
 [] usb_probe_interface+0x6b/0x80 [usbcore]
 [] bus_match+0x3f/0x70
 [] device_attach+0x3f/0xa0
 [] kobject_get+0x1a/0x30
 [] bus_add_device+0x5b/0xb0
 [] device_add+0xa1/0x130
 [] usb_set_configuration+0x303/0x470 [usbcore]
 [] usb_new_device+0xb2/0x170 [usbcore]
 [] hub_port_connect_change+0x20e/0x400 [usbcore]
 [] hub_events+0x271/0x3c0 [usbcore]
 [] hub_thread+0x35/0x120 [usbcore]
 [] autoremove_wake_function+0x0/0x60
 [] ret_from_fork+0x6/0x14
 [] autoremove_wake_function+0x0/0x60
 [] hub_thread+0x0/0x120 [usbcore]
 [] kernel_thread_helper+0x5/0x18
devfs_mk_dev: could not append to parent for ub/a/part2

_ [Debian] gnomemeeting

gnomemeetingが動いたのを実感した. openMCU on win32 に接続させてもらった．その人が

FreeBSDやLinuxのOpenMCUを試したがタメだった．http://www.openh323.orgから落とせる．