diff -ruN gworldclock-1.1-orig/ABOUT-NLS gworldclock-1.1/ABOUT-NLS --- gworldclock-1.1-orig/ABOUT-NLS 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/ABOUT-NLS 2003-07-26 12:48:33.000000000 +0900 @@ -0,0 +1,625 @@ +Notes on the Free Translation Project +************************************* + + Free software is going international! The Free Translation Project +is a way to get maintainers of free software, translators, and users all +together, so that will gradually become able to speak many languages. +A few packages already provide translations for their messages. + + If you found this `ABOUT-NLS' file inside a distribution, you may +assume that the distributed package does use GNU `gettext' internally, +itself available at your nearest GNU archive site. But you do _not_ +need to install GNU `gettext' prior to configuring, installing or using +this package with messages translated. + + Installers will find here some useful hints. These notes also +explain how users should proceed for getting the programs to use the +available translations. They tell how people wanting to contribute and +work at translations should contact the appropriate team. + + When reporting bugs in the `intl/' directory or bugs which may be +related to internationalization, you should tell about the version of +`gettext' which is used. The information can be found in the +`intl/VERSION' file, in internationalized packages. + +Quick configuration advice +========================== + + If you want to exploit the full power of internationalization, you +should configure it using + + ./configure --with-included-gettext + +to force usage of internationalizing routines provided within this +package, despite the existence of internationalizing capabilities in the +operating system where this package is being installed. So far, only +the `gettext' implementation in the GNU C library version 2 provides as +many features (such as locale alias, message inheritance, automatic +charset conversion or plural form handling) as the implementation here. +It is also not possible to offer this additional functionality on top +of a `catgets' implementation. Future versions of GNU `gettext' will +very likely convey even more functionality. So it might be a good idea +to change to GNU `gettext' as soon as possible. + + So you need _not_ provide this option if you are using GNU libc 2 or +you have installed a recent copy of the GNU gettext package with the +included `libintl'. + +INSTALL Matters +=============== + + Some packages are "localizable" when properly installed; the +programs they contain can be made to speak your own native language. +Most such packages use GNU `gettext'. Other packages have their own +ways to internationalization, predating GNU `gettext'. + + By default, this package will be installed to allow translation of +messages. It will automatically detect whether the system already +provides the GNU `gettext' functions. If not, the GNU `gettext' own +library will be used. This library is wholly contained within this +package, usually in the `intl/' subdirectory, so prior installation of +the GNU `gettext' package is _not_ required. Installers may use +special options at configuration time for changing the default +behaviour. The commands: + + ./configure --with-included-gettext + ./configure --disable-nls + +will respectively bypass any pre-existing `gettext' to use the +internationalizing routines provided within this package, or else, +_totally_ disable translation of messages. + + When you already have GNU `gettext' installed on your system and run +configure without an option for your new package, `configure' will +probably detect the previously built and installed `libintl.a' file and +will decide to use this. This might be not what is desirable. You +should use the more recent version of the GNU `gettext' library. I.e. +if the file `intl/VERSION' shows that the library which comes with this +package is more recent, you should use + + ./configure --with-included-gettext + +to prevent auto-detection. + + The configuration process will not test for the `catgets' function +and therefore it will not be used. The reason is that even an +emulation of `gettext' on top of `catgets' could not provide all the +extensions of the GNU `gettext' library. + + Internationalized packages have usually many `po/LL.po' files, where +LL gives an ISO 639 two-letter code identifying the language. Unless +translations have been forbidden at `configure' time by using the +`--disable-nls' switch, all available translations are installed +together with the package. However, the environment variable `LINGUAS' +may be set, prior to configuration, to limit the installed set. +`LINGUAS' should then contain a space separated list of two-letter +codes, stating which languages are allowed. + +Using This Package +================== + + As a user, if your language has been installed for this package, you +only have to set the `LANG' environment variable to the appropriate +`LL_CC' combination. Here `LL' is an ISO 639 two-letter language code, +and `CC' is an ISO 3166 two-letter country code. For example, let's +suppose that you speak German and live in Germany. At the shell +prompt, merely execute `setenv LANG de_DE' (in `csh'), +`export LANG; LANG=de_DE' (in `sh') or `export LANG=de_DE' (in `bash'). +This can be done from your `.login' or `.profile' file, once and for +all. + + You might think that the country code specification is redundant. +But in fact, some languages have dialects in different countries. For +example, `de_AT' is used for Austria, and `pt_BR' for Brazil. The +country code serves to distinguish the dialects. + + The locale naming convention of `LL_CC', with `LL' denoting the +language and `CC' denoting the country, is the one use on systems based +on GNU libc. On other systems, some variations of this scheme are +used, such as `LL' or `LL_CC.ENCODING'. You can get the list of +locales supported by your system for your country by running the command +`locale -a | grep '^LL''. + + Not all programs have translations for all languages. By default, an +English message is shown in place of a nonexistent translation. If you +understand other languages, you can set up a priority list of languages. +This is done through a different environment variable, called +`LANGUAGE'. GNU `gettext' gives preference to `LANGUAGE' over `LANG' +for the purpose of message handling, but you still need to have `LANG' +set to the primary language; this is required by other parts of the +system libraries. For example, some Swedish users who would rather +read translations in German than English for when Swedish is not +available, set `LANGUAGE' to `sv:de' while leaving `LANG' to `sv_SE'. + + In the `LANGUAGE' environment variable, but not in the `LANG' +environment variable, `LL_CC' combinations can be abbreviated as `LL' +to denote the language's main dialect. For example, `de' is equivalent +to `de_DE' (German as spoken in Germany), and `pt' to `pt_PT' +(Portuguese as spoken in Portugal) in this context. + +Translating Teams +================= + + For the Free Translation Project to be a success, we need interested +people who like their own language and write it well, and who are also +able to synergize with other translators speaking the same language. +Each translation team has its own mailing list. The up-to-date list of +teams can be found at the Free Translation Project's homepage, +`http://www.iro.umontreal.ca/contrib/po/HTML/', in the "National teams" +area. + + If you'd like to volunteer to _work_ at translating messages, you +should become a member of the translating team for your own language. +The subscribing address is _not_ the same as the list itself, it has +`-request' appended. For example, speakers of Swedish can send a +message to `sv-request@li.org', having this message body: + + subscribe + + Keep in mind that team members are expected to participate +_actively_ in translations, or at solving translational difficulties, +rather than merely lurking around. If your team does not exist yet and +you want to start one, or if you are unsure about what to do or how to +get started, please write to `translation@iro.umontreal.ca' to reach the +coordinator for all translator teams. + + The English team is special. It works at improving and uniformizing +the terminology in use. Proven linguistic skill are praised more than +programming skill, here. + +Available Packages +================== + + Languages are not equally supported in all packages. The following +matrix shows the current state of internationalization, as of May 2003. +The matrix shows, in regard of each package, for which languages PO +files have been submitted to translation coordination, with a +translation percentage of at least 50%. + + Ready PO files am az be bg ca cs da de el en en_GB eo es + +-------------------------------------------+ + a2ps | [] [] [] [] | + aegis | () | + anubis | | + ap-utils | | + bash | [] [] [] | + batchelor | | + bfd | [] [] | + binutils | [] [] | + bison | [] [] [] | + bluez-pin | [] [] | + clisp | | + clisp | [] [] [] | + coreutils | [] [] [] [] | + cpio | [] [] [] | + darkstat | () [] | + diffutils | [] [] [] [] [] [] [] | + e2fsprogs | [] [] | + enscript | [] [] [] [] | + error | [] [] [] [] [] | + fetchmail | [] () [] [] [] [] | + fileutils | [] [] [] | + findutils | [] [] [] [] [] [] | + flex | [] [] [] [] | + gas | [] | + gawk | [] [] [] [] | + gcal | [] | + gcc | [] [] | + gettext | [] [] [] [] [] | + gettext-runtime | [] [] [] [] [] | + gettext-tools | [] [] | + gimp-print | [] [] [] [] [] | + gliv | | + glunarclock | [] [] [] | + gnucash | () [] | + gnucash-glossary | [] () [] | + gnupg | [] () [] [] [] [] | + gpe-calendar | [] | + gpe-conf | [] | + gpe-contacts | [] | + gpe-edit | | + gpe-login | [] | + gpe-ownerinfo | [] | + gpe-sketchbook | [] | + gpe-timesheet | | + gpe-today | [] | + gpe-todo | [] | + gphoto2 | [] [] [] [] | + gprof | [] [] | + gpsdrive | () () () | + grep | [] [] [] [] [] | + gretl | [] | + hello | [] [] [] [] [] [] | + id-utils | [] [] | + indent | [] [] [] [] | + jpilot | [] [] [] [] | + jwhois | [] | + kbd | [] [] [] [] [] | + ld | [] [] | + libc | [] [] [] [] [] [] | + libgpewidget | [] | + libiconv | [] [] [] [] [] | + lifelines | [] () | + lilypond | [] | + lingoteach | | + lingoteach_lessons | () () | + lynx | [] [] [] [] | + m4 | [] [] [] [] | + mailutils | [] [] | + make | [] [] [] | + man-db | [] () [] [] () | + mysecretdiary | [] [] [] | + nano | [] () [] [] [] | + nano_1_0 | [] () [] [] [] | + opcodes | [] [] | + parted | [] [] [] [] [] | + ptx | [] [] [] [] [] | + python | | + radius | | + recode | [] [] [] [] [] [] | + screem | | + sed | [] [] [] [] [] | + sh-utils | [] [] [] | + sharutils | [] [] [] [] [] [] | + sketch | [] () [] | + soundtracker | [] [] [] | + sp | [] | + tar | [] [] [] [] | + texinfo | [] [] [] [] | + textutils | [] [] [] [] | + tin | () () | + util-linux | [] [] [] [] [] | + vorbis-tools | [] [] [] | + wastesedge | () | + wdiff | [] [] [] [] | + wget | [] [] [] [] [] [] [] | + xchat | [] [] [] | + xpad | | + +-------------------------------------------+ + am az be bg ca cs da de el en en_GB eo es + 0 1 4 2 31 17 54 60 14 1 4 12 56 + + et fa fi fr ga gl he hr hu id it ja ko + +----------------------------------------+ + a2ps | [] [] [] () () | + aegis | | + anubis | [] | + ap-utils | [] | + bash | [] [] | + batchelor | [] | + bfd | [] [] | + binutils | [] [] | + bison | [] [] [] [] | + bluez-pin | [] [] [] [] | + clisp | | + clisp | [] | + coreutils | [] [] [] [] | + cpio | [] [] [] [] | + darkstat | () [] [] [] | + diffutils | [] [] [] [] [] [] [] | + e2fsprogs | | + enscript | [] [] | + error | [] [] [] [] | + fetchmail | [] | + fileutils | [] [] [] [] [] | + findutils | [] [] [] [] [] [] [] [] [] [] [] | + flex | [] [] | + gas | [] | + gawk | [] [] | + gcal | [] | + gcc | [] | + gettext | [] [] [] | + gettext-runtime | [] [] [] [] | + gettext-tools | [] | + gimp-print | [] [] | + gliv | () | + glunarclock | [] [] [] [] | + gnucash | [] | + gnucash-glossary | [] | + gnupg | [] [] [] [] [] [] [] | + gpe-calendar | [] | + gpe-conf | | + gpe-contacts | [] | + gpe-edit | [] [] | + gpe-login | [] | + gpe-ownerinfo | [] [] [] | + gpe-sketchbook | [] | + gpe-timesheet | [] [] [] | + gpe-today | [] [] | + gpe-todo | [] [] | + gphoto2 | [] [] [] | + gprof | [] [] | + gpsdrive | () [] () () | + grep | [] [] [] [] [] [] [] [] [] [] [] | + gretl | [] | + hello | [] [] [] [] [] [] [] [] [] [] [] [] [] | + id-utils | [] [] [] | + indent | [] [] [] [] [] [] [] [] | + jpilot | [] () | + jwhois | [] [] [] [] | + kbd | [] | + ld | [] | + libc | [] [] [] [] [] [] | + libgpewidget | [] [] [] | + libiconv | [] [] [] [] [] [] [] [] | + lifelines | () | + lilypond | [] | + lingoteach | [] [] | + lingoteach_lessons | | + lynx | [] [] [] [] | + m4 | [] [] [] [] | + mailutils | | + make | [] [] [] [] [] [] | + man-db | [] () () | + mysecretdiary | [] [] | + nano | [] [] [] [] | + nano_1_0 | [] [] [] [] | + opcodes | [] [] | + parted | [] [] [] | + ptx | [] [] [] [] [] [] [] | + python | | + radius | | + recode | [] [] [] [] [] [] | + screem | | + sed | [] [] [] [] [] [] [] [] | + sh-utils | [] [] [] [] [] [] | + sharutils | [] [] [] [] [] | + sketch | [] | + soundtracker | [] [] [] | + sp | [] () | + tar | [] [] [] [] [] [] [] [] [] | + texinfo | [] [] [] [] | + textutils | [] [] [] [] [] | + tin | [] () | + util-linux | [] [] [] [] () [] | + vorbis-tools | [] | + wastesedge | () | + wdiff | [] [] [] [] [] | + wget | [] [] [] [] [] [] [] [] | + xchat | [] [] [] | + xpad | | + +----------------------------------------+ + et fa fi fr ga gl he hr hu id it ja ko + 20 1 15 73 14 24 8 10 30 31 19 31 9 + + lg lt lv ms nb nl nn no pl pt pt_BR ro + +----------------------------------------+ + a2ps | [] [] () () () [] [] | + aegis | () | + anubis | [] [] | + ap-utils | () | + bash | [] | + batchelor | | + bfd | | + binutils | | + bison | [] [] [] [] | + bluez-pin | [] | + clisp | | + clisp | [] | + coreutils | [] | + cpio | [] [] [] | + darkstat | [] [] [] [] | + diffutils | [] [] [] | + e2fsprogs | | + enscript | [] [] | + error | [] [] | + fetchmail | () () | + fileutils | [] | + findutils | [] [] [] [] | + flex | [] | + gas | | + gawk | [] | + gcal | | + gcc | | + gettext | [] | + gettext-runtime | [] | + gettext-tools | | + gimp-print | [] | + gliv | [] | + glunarclock | [] | + gnucash | | + gnucash-glossary | [] [] | + gnupg | | + gpe-calendar | [] [] | + gpe-conf | [] [] | + gpe-contacts | [] | + gpe-edit | [] [] | + gpe-login | [] [] | + gpe-ownerinfo | [] [] | + gpe-sketchbook | [] [] | + gpe-timesheet | [] [] | + gpe-today | [] [] | + gpe-todo | [] [] | + gphoto2 | | + gprof | [] | + gpsdrive | () () () | + grep | [] [] [] [] | + gretl | | + hello | [] [] [] [] [] [] [] [] [] | + id-utils | [] [] [] | + indent | [] [] [] | + jpilot | () () | + jwhois | [] [] [] | + kbd | | + ld | | + libc | [] [] [] [] | + libgpewidget | [] [] | + libiconv | [] [] | + lifelines | | + lilypond | [] | + lingoteach | | + lingoteach_lessons | | + lynx | [] [] | + m4 | [] [] [] [] | + mailutils | | + make | [] [] | + man-db | [] | + mysecretdiary | [] | + nano | [] [] [] [] | + nano_1_0 | [] [] [] [] | + opcodes | [] [] [] | + parted | [] [] [] | + ptx | [] [] [] [] [] [] [] | + python | | + radius | | + recode | [] [] [] | + screem | | + sed | [] [] | + sh-utils | [] | + sharutils | [] | + sketch | [] | + soundtracker | | + sp | | + tar | [] [] [] [] [] [] | + texinfo | [] | + textutils | [] | + tin | | + util-linux | [] [] | + vorbis-tools | [] [] | + wastesedge | | + wdiff | [] [] [] [] | + wget | [] [] [] | + xchat | [] [] | + xpad | [] | + +----------------------------------------+ + lg lt lv ms nb nl nn no pl pt pt_BR ro + 0 0 2 11 7 26 3 4 18 15 34 34 + + ru sk sl sr sv ta tr uk vi wa zh_CN zh_TW + +-------------------------------------------+ + a2ps | [] [] [] [] [] | 16 + aegis | () | 0 + anubis | [] [] | 5 + ap-utils | () | 1 + bash | [] | 7 + batchelor | | 1 + bfd | [] [] [] | 7 + binutils | [] [] [] | 7 + bison | [] [] | 13 + bluez-pin | | 7 + clisp | | 0 + clisp | | 5 + coreutils | [] [] [] [] [] | 14 + cpio | [] [] [] | 13 + darkstat | [] () () | 9 + diffutils | [] [] [] [] | 21 + e2fsprogs | [] | 3 + enscript | [] [] [] | 11 + error | [] [] [] | 14 + fetchmail | [] | 7 + fileutils | [] [] [] [] [] [] | 15 + findutils | [] [] [] [] [] [] | 27 + flex | [] [] [] | 10 + gas | [] | 3 + gawk | [] [] | 9 + gcal | [] [] | 4 + gcc | [] | 4 + gettext | [] [] [] [] [] [] | 15 + gettext-runtime | [] [] [] [] [] [] | 16 + gettext-tools | [] [] | 5 + gimp-print | [] [] | 10 + gliv | | 1 + glunarclock | [] [] [] | 11 + gnucash | [] [] | 4 + gnucash-glossary | [] [] [] | 8 + gnupg | [] [] [] [] | 16 + gpe-calendar | [] | 5 + gpe-conf | | 3 + gpe-contacts | [] | 4 + gpe-edit | [] | 5 + gpe-login | [] | 5 + gpe-ownerinfo | [] | 7 + gpe-sketchbook | [] | 5 + gpe-timesheet | [] | 6 + gpe-today | [] | 6 + gpe-todo | [] | 6 + gphoto2 | [] [] | 9 + gprof | [] [] | 7 + gpsdrive | [] [] | 3 + grep | [] [] [] [] | 24 + gretl | | 2 + hello | [] [] [] [] [] | 33 + id-utils | [] [] [] | 11 + indent | [] [] [] [] | 19 + jpilot | [] [] [] [] [] | 10 + jwhois | () () [] [] | 10 + kbd | [] [] | 8 + ld | [] [] | 5 + libc | [] [] [] [] | 20 + libgpewidget | | 6 + libiconv | [] [] [] [] [] [] | 21 + lifelines | [] | 2 + lilypond | [] | 4 + lingoteach | | 2 + lingoteach_lessons | () | 0 + lynx | [] [] [] [] | 14 + m4 | [] [] [] | 15 + mailutils | | 2 + make | [] [] [] [] | 15 + man-db | [] | 6 + mysecretdiary | [] [] | 8 + nano | [] [] [] | 15 + nano_1_0 | [] [] [] | 15 + opcodes | [] [] | 9 + parted | [] [] | 13 + ptx | [] [] [] | 22 + python | | 0 + radius | | 0 + recode | [] [] [] [] | 19 + screem | [] | 1 + sed | [] [] [] [] [] | 20 + sh-utils | [] [] [] | 13 + sharutils | [] [] [] [] | 16 + sketch | [] | 5 + soundtracker | [] | 7 + sp | [] | 3 + tar | [] [] [] [] [] | 24 + texinfo | [] [] [] [] | 13 + textutils | [] [] [] [] [] | 15 + tin | | 1 + util-linux | [] [] | 14 + vorbis-tools | [] | 7 + wastesedge | | 0 + wdiff | [] [] [] [] | 17 + wget | [] [] [] [] [] [] [] | 25 + xchat | [] [] [] | 11 + xpad | | 1 + +-------------------------------------------+ + 50 teams ru sk sl sr sv ta tr uk vi wa zh_CN zh_TW + 97 domains 32 19 16 0 56 0 48 10 1 1 12 23 913 + + Some counters in the preceding matrix are higher than the number of +visible blocks let us expect. This is because a few extra PO files are +used for implementing regional variants of languages, or language +dialects. + + For a PO file in the matrix above to be effective, the package to +which it applies should also have been internationalized and +distributed as such by its maintainer. There might be an observable +lag between the mere existence a PO file and its wide availability in a +distribution. + + If May 2003 seems to be old, you may fetch a more recent copy of +this `ABOUT-NLS' file on most GNU archive sites. The most up-to-date +matrix with full percentage details can be found at +`http://www.iro.umontreal.ca/contrib/po/HTML/matrix.html'. + +Using `gettext' in new packages +=============================== + + If you are writing a freely available program and want to +internationalize it you are welcome to use GNU `gettext' in your +package. Of course you have to respect the GNU Library General Public +License which covers the use of the GNU `gettext' library. This means +in particular that even non-free programs can use `libintl' as a shared +library, whereas only free software can use `libintl' as a static +library or use modified versions of `libintl'. + + Once the sources are changed appropriately and the setup can handle +the use of `gettext' the only thing missing are the translations. The +Free Translation Project is also available for packages which are not +developed inside the GNU project. Therefore the information given above +applies also for every other Free Software Project. Contact +`translation@iro.umontreal.ca' to make the `.pot' files available to +the translation teams. + diff -ruN gworldclock-1.1-orig/COPYING gworldclock-1.1/COPYING --- gworldclock-1.1-orig/COPYING 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/COPYING 2003-07-26 12:45:22.000000000 +0900 @@ -1,12 +1,340 @@ -gworldclock is Copyright Drew Parsons (2000-2003). + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 -Distributed under the terms of the General Public License Version 2 (see GPL). + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. -In other words, I was able to write the program because other people shared -their software with me, and so if you're going to use my program to write your -own, you better be prepared to share it with other people too. + Preamble + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. -Drew Parsons -dparsons@emerall.com -dparsons@debian.org + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff -ruN gworldclock-1.1-orig/ChangeLog gworldclock-1.1/ChangeLog --- gworldclock-1.1-orig/ChangeLog 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/ChangeLog 2003-07-22 07:00:24.000000000 +0900 @@ -1,3 +1,10 @@ +2003-07-22 gettextize + + * Makefile.am (SUBDIRS): New variable. + (ACLOCAL_AMFLAGS): New variable. + (EXTRA_DIST): Add config.rpath. + * configure.ac (AC_OUTPUT): Add po/Makefile.in, + 1.1 5 April 2003 * Split code into separate files. * The point of this was to facilitate debugging the problem of the diff -ruN gworldclock-1.1-orig/INSTALL gworldclock-1.1/INSTALL --- gworldclock-1.1-orig/INSTALL 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/INSTALL 2003-07-26 12:45:22.000000000 +0900 @@ -1,3 +1,9 @@ +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software +Foundation, Inc. + + This file is free documentation; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. + Basic Installation ================== @@ -8,20 +14,27 @@ those values to create a `Makefile' in each directory of the package. It may also create one or more `.h' files containing system-dependent definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, a file -`config.cache' that saves the results of its tests to speed up -reconfiguring, and a file `config.log' containing compiler output -(useful mainly for debugging `configure'). +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. (Caching is +disabled by default to prevent problems with accidental use of stale +cache files.) If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail diffs or instructions to the address given in the `README' so they can -be considered for the next release. If at some point `config.cache' -contains results you don't want to keep, you may remove or edit it. - - The file `configure.in' is used to create `configure' by a program -called `autoconf'. You only need `configure.in' if you want to change -it or regenerate `configure' using a newer version of `autoconf'. +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You only need +`configure.ac' if you want to change it or regenerate `configure' using +a newer version of `autoconf'. The simplest way to compile this package is: @@ -55,14 +68,16 @@ ===================== Some systems require unusual options for compilation or linking that -the `configure' script does not know about. You can give `configure' -initial values for variables by setting them in the environment. Using -a Bourne-compatible shell, you can do that on the command line like -this: - CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. -Or on systems that have the `env' program, you can do it like this: - env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix + + *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== @@ -75,11 +90,11 @@ the `configure' script. `configure' automatically checks for the source code in the directory that `configure' is in and in `..'. - If you have to use a `make' that does not supports the `VPATH' -variable, you have to compile the package for one architecture at a time -in the source code directory. After you have installed the package for -one architecture, use `make distclean' before reconfiguring for another -architecture. + If you have to use a `make' that does not support the `VPATH' +variable, you have to compile the package for one architecture at a +time in the source code directory. After you have installed the +package for one architecture, use `make distclean' before reconfiguring +for another architecture. Installation Names ================== @@ -122,22 +137,32 @@ Specifying the System Type ========================== - There may be some features `configure' can not figure out -automatically, but needs to determine by the type of host the package -will run on. Usually `configure' can figure that out, but if it prints -a message saying it can not guess the host type, give it the -`--host=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name with three fields: + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + CPU-COMPANY-SYSTEM -See the file `config.sub' for the possible values of each field. If +where SYSTEM can have one of these forms: + + OS KERNEL-OS + + See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't -need to know the host type. +need to know the machine type. - If you are building compiler tools for cross-compiling, you can also + If you are _building_ compiler tools for cross-compiling, you should use the `--target=TYPE' option to select the type of system they will -produce code for and the `--build=TYPE' option to select the type of -system on which you are compiling the package. +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. Sharing Defaults ================ @@ -150,20 +175,44 @@ `CONFIG_SITE' environment variable to the location of the site script. A warning: not all `configure' scripts look for a site script. -Operation Controls +Defining Variables ================== + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +will cause the specified gcc to be used as the C compiler (unless it is +overridden in the site shell script). + +`configure' Invocation +====================== + `configure' recognizes the following options to control how it operates. -`--cache-file=FILE' - Use and save the results of the tests in FILE instead of - `./config.cache'. Set FILE to `/dev/null' to disable caching, for - debugging `configure'. - `--help' +`-h' Print a summary of the options to `configure', and exit. +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + `--quiet' `--silent' `-q' @@ -175,8 +224,6 @@ Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. -`--version' - Print the version of Autoconf used to generate the `configure' - script, and exit. +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. -`configure' also accepts some other, not widely useful, options. diff -ruN gworldclock-1.1-orig/Makefile.am gworldclock-1.1/Makefile.am --- gworldclock-1.1-orig/Makefile.am 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/Makefile.am 2003-07-26 14:17:52.000000000 +0900 @@ -2,8 +2,13 @@ bin_SCRIPTS = tzwatch gworldclock_SOURCES = main.c misc.c resize.c sync.c timer.c zones.c main.h misc.h resize.h sync.h timer.h zones.h man_MANS = gworldclock.1 tzwatch.1 -EXTRA_DIST = $(man_MANS) +EXTRA_DIST = config.rpath $(man_MANS) INCLUDES = @GTK2_CFLAGS@ LDADD = @GTK2_LIBS@ +AM_CFLAGS = -DLOCALEDIR="\"$(localedir)\"" CLEANFILES = *~ DISTCLEANFILES = .deps/*.P + +SUBDIRS = m4 po + +ACLOCAL_AMFLAGS = -I m4 diff -ruN gworldclock-1.1-orig/Makefile.in gworldclock-1.1/Makefile.in --- gworldclock-1.1-orig/Makefile.in 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/Makefile.in 2003-07-26 14:17:55.000000000 +0900 @@ -1,7 +1,7 @@ -# Makefile.in generated by automake 1.6.3 from Makefile.am. +# Makefile.in generated by automake 1.7.5 from Makefile.am. # @configure_input@ -# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 # Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -13,79 +13,133 @@ # PARTICULAR PURPOSE. @SET_MAKE@ -SHELL = @SHELL@ srcdir = @srcdir@ top_srcdir = @top_srcdir@ VPATH = @srcdir@ -prefix = @prefix@ -exec_prefix = @exec_prefix@ - -bindir = @bindir@ -sbindir = @sbindir@ -libexecdir = @libexecdir@ -datadir = @datadir@ -sysconfdir = @sysconfdir@ -sharedstatedir = @sharedstatedir@ -localstatedir = @localstatedir@ -libdir = @libdir@ -infodir = @infodir@ -mandir = @mandir@ -includedir = @includedir@ -oldincludedir = /usr/include pkgdatadir = $(datadir)/@PACKAGE@ pkglibdir = $(libdir)/@PACKAGE@ pkgincludedir = $(includedir)/@PACKAGE@ top_builddir = . -ACLOCAL = @ACLOCAL@ -AUTOCONF = @AUTOCONF@ -AUTOMAKE = @AUTOMAKE@ -AUTOHEADER = @AUTOHEADER@ - am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd INSTALL = @INSTALL@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_DATA = @INSTALL_DATA@ install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c -INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_HEADER = $(INSTALL_DATA) -transform = @program_transform_name@ +transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : - -EXEEXT = @EXEEXT@ -OBJEXT = @OBJEXT@ -PATH_SEPARATOR = @PATH_SEPARATOR@ +host_triplet = @host@ +ACLOCAL = @ACLOCAL@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ AWK = @AWK@ CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EXEEXT = @EXEEXT@ +GMSGFMT = @GMSGFMT@ GTK2_CFLAGS = @GTK2_CFLAGS@ GTK2_LIBS = @GTK2_LIBS@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKINSTALLDIRS = @MKINSTALLDIRS@ +MSGFMT = @MSGFMT@ +MSGMERGE = @MSGMERGE@ +OBJEXT = @OBJEXT@ PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ PKG_CONFIG = @PKG_CONFIG@ +POSUB = @POSUB@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ STRIP = @STRIP@ +USE_NLS = @USE_NLS@ VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_STRIP = @ac_ct_STRIP@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ am__include = @am__include@ +am__leading_dot = @am__leading_dot@ am__quote = @am__quote@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +datadir = @datadir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +includedir = @includedir@ +infodir = @infodir@ install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +oldincludedir = @oldincludedir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ bin_PROGRAMS = gworldclock bin_SCRIPTS = tzwatch gworldclock_SOURCES = main.c misc.c resize.c sync.c timer.c zones.c main.h misc.h resize.h sync.h timer.h zones.h man_MANS = gworldclock.1 tzwatch.1 -EXTRA_DIST = $(man_MANS) +EXTRA_DIST = config.rpath $(man_MANS) INCLUDES = @GTK2_CFLAGS@ LDADD = @GTK2_LIBS@ +AM_CFLAGS = -DLOCALEDIR="\"$(localedir)\"" CLEANFILES = *~ DISTCLEANFILES = .deps/*.P + +SUBDIRS = m4 po + +ACLOCAL_AMFLAGS = -I m4 subdir = . ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs @@ -103,11 +157,7 @@ SCRIPTS = $(bin_SCRIPTS) -DEFS = @DEFS@ DEFAULT_INCLUDES = -I. -I$(srcdir) -I. -CPPFLAGS = @CPPFLAGS@ -LDFLAGS = @LDFLAGS@ -LIBS = @LIBS@ depcomp = $(SHELL) $(top_srcdir)/depcomp am__depfiles_maybe = depfiles @AMDEP_TRUE@DEP_FILES = ./$(DEPDIR)/main.Po ./$(DEPDIR)/misc.Po \ @@ -117,18 +167,25 @@ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) CCLD = $(CC) LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@ -CFLAGS = @CFLAGS@ DIST_SOURCES = $(gworldclock_SOURCES) NROFF = nroff MANS = $(man_MANS) -DIST_COMMON = README AUTHORS COPYING ChangeLog INSTALL Makefile.am \ - Makefile.in NEWS aclocal.m4 config.h.in configure configure.ac \ + +RECURSIVE_TARGETS = info-recursive dvi-recursive pdf-recursive \ + ps-recursive install-info-recursive uninstall-info-recursive \ + all-recursive install-data-recursive install-exec-recursive \ + installdirs-recursive install-recursive uninstall-recursive \ + check-recursive installcheck-recursive +DIST_COMMON = README ABOUT-NLS AUTHORS COPYING ChangeLog INSTALL \ + Makefile.am Makefile.in NEWS aclocal.m4 config.guess \ + config.h.in config.rpath config.sub configure configure.ac \ depcomp install-sh missing mkinstalldirs +DIST_SUBDIRS = $(SUBDIRS) SOURCES = $(gworldclock_SOURCES) all: config.h - $(MAKE) $(AM_MAKEFLAGS) all-am + $(MAKE) $(AM_MAKEFLAGS) all-recursive .SUFFIXES: .SUFFIXES: .c .o .obj @@ -137,7 +194,7 @@ configure.lineno $(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) cd $(top_srcdir) && \ - $(AUTOMAKE) --foreign Makefile + $(AUTOMAKE) --gnu Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe) @@ -146,7 +203,7 @@ $(srcdir)/configure: $(srcdir)/configure.ac $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) cd $(srcdir) && $(AUTOCONF) -$(ACLOCAL_M4): configure.ac +$(ACLOCAL_M4): configure.ac m4/codeset.m4 m4/gettext.m4 m4/glibc21.m4 m4/iconv.m4 m4/intdiv0.m4 m4/inttypes-pri.m4 m4/inttypes.m4 m4/inttypes_h.m4 m4/isc-posix.m4 m4/lcmessage.m4 m4/lib-ld.m4 m4/lib-link.m4 m4/lib-prefix.m4 m4/nls.m4 m4/po.m4 m4/progtest.m4 m4/stdint_h.m4 m4/uintmax_t.m4 m4/ulonglong.m4 cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) config.h: stamp-h1 @@ -175,7 +232,7 @@ ; then \ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ echo " $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f"; \ - $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f; \ + $(INSTALL_PROGRAM_ENV) $(binPROGRAMS_INSTALL) $$p $(DESTDIR)$(bindir)/$$f || exit 1; \ else :; fi; \ done @@ -230,17 +287,26 @@ -rm -rf ./$(DEPDIR) .c.o: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< +@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \ +@am__fastdepCC_TRUE@ -c -o $@ `test -f '$<' || echo '$(srcdir)/'`$<; \ +@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \ +@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \ +@am__fastdepCC_TRUE@ fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `test -f '$<' || echo '$(srcdir)/'`$< .c.obj: -@AMDEP_TRUE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ -@AMDEP_TRUE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ -@AMDEP_TRUE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ - $(COMPILE) -c `cygpath -w $<` -CCDEPMODE = @CCDEPMODE@ +@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" \ +@am__fastdepCC_TRUE@ -c -o $@ `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi`; \ +@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; \ +@am__fastdepCC_TRUE@ else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; \ +@am__fastdepCC_TRUE@ fi +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ depfile='$(DEPDIR)/$*.Po' tmpdepfile='$(DEPDIR)/$*.TPo' @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `if test -f '$<'; then $(CYGPATH_W) '$<'; else $(CYGPATH_W) '$(srcdir)/$<'; fi` uninstall-info-am: man1dir = $(mandir)/man1 @@ -279,6 +345,10 @@ done; \ for i in $$list; do \ ext=`echo $$i | sed -e 's/^.*\\.//'`; \ + case "$$ext" in \ + 1*) ;; \ + *) ext='1' ;; \ + esac; \ inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ inst=`echo $$inst | sed -e 's/^.*\///'`; \ inst=`echo $$inst | sed '$(transform)'`.$$ext; \ @@ -286,9 +356,71 @@ rm -f $(DESTDIR)$(man1dir)/$$inst; \ done +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +mostlyclean-recursive clean-recursive distclean-recursive \ +maintainer-clean-recursive: + @set fnord $$MAKEFLAGS; amf=$$2; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + ETAGS = etags ETAGSFLAGS = +CTAGS = ctags +CTAGSFLAGS = + tags: TAGS ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) @@ -300,10 +432,21 @@ END { for (i in files) print i; }'`; \ mkid -fID $$unique -TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ +TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ + if (etags --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + else \ + include_option=--include; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -f $$subdir/TAGS && \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ @@ -314,13 +457,28 @@ || $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) top_distdir = . @@ -332,12 +490,20 @@ && rm -fr $(distdir); }; } GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print distcleancheck_listfiles = find . -type f -print distdir: $(DISTFILES) $(am__remove_distdir) mkdir $(distdir) - @list='$(DISTFILES)'; for file in $$list; do \ + $(mkinstalldirs) $(distdir)/po + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ @@ -357,6 +523,19 @@ || exit 1; \ fi; \ done + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d $(distdir)/$$subdir \ + || mkdir $(distdir)/$$subdir \ + || exit 1; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$(top_distdir)" \ + distdir=../$(distdir)/$$subdir \ + distdir) \ + || exit 1; \ + fi; \ + done -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ @@ -377,12 +556,13 @@ $(am__remove_distdir) GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(AMTAR) xf - chmod -R a-w $(distdir); chmod a+w $(distdir) - mkdir $(distdir)/=build - mkdir $(distdir)/=inst + mkdir $(distdir)/_build + mkdir $(distdir)/_inst chmod a-w $(distdir) - dc_install_base=`$(am__cd) $(distdir)/=inst && pwd` \ - && cd $(distdir)/=build \ - && ../configure --srcdir=.. --prefix=$$dc_install_base \ + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ $(DISTCHECK_CONFIGURE_FLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) \ && $(MAKE) $(AM_MAKEFLAGS) dvi \ @@ -390,41 +570,57 @@ && $(MAKE) $(AM_MAKEFLAGS) install \ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ - && (test `find $$dc_install_base -type f -print | wc -l` -le 1 \ - || { echo "ERROR: files left after uninstall:" ; \ - find $$dc_install_base -type f -print ; \ - exit 1; } >&2 ) \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && $(mkinstalldirs) "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ && $(MAKE) $(AM_MAKEFLAGS) dist-gzip \ && rm -f $(distdir).tar.gz \ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck $(am__remove_distdir) @echo "$(distdir).tar.gz is ready for distribution" | \ sed 'h;s/./=/g;p;x;p;x' +distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 distcleancheck: distclean - if test '$(srcdir)' = . ; then \ + @if test '$(srcdir)' = . ; then \ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ exit 1 ; \ fi - test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ - || { echo "ERROR: files left after distclean:" ; \ + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ $(distcleancheck_listfiles) ; \ exit 1; } >&2 check-am: all-am -check: check-am +check: check-recursive all-am: Makefile $(PROGRAMS) $(SCRIPTS) $(MANS) config.h - -installdirs: +installdirs: installdirs-recursive +installdirs-am: $(mkinstalldirs) $(DESTDIR)$(bindir) $(DESTDIR)$(bindir) $(DESTDIR)$(man1dir) -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am -installcheck: installcheck-am +installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ INSTALL_STRIP_FLAG=-s \ @@ -442,20 +638,20 @@ maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." -clean: clean-am +clean: clean-recursive clean-am: clean-binPROGRAMS clean-generic mostlyclean-am -distclean: distclean-am +distclean: distclean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) distclean-am: clean-am distclean-compile distclean-depend \ distclean-generic distclean-hdr distclean-tags -dvi: dvi-am +dvi: dvi-recursive dvi-am: -info: info-am +info: info-recursive info-am: @@ -463,39 +659,56 @@ install-exec-am: install-binPROGRAMS install-binSCRIPTS -install-info: install-info-am +install-info: install-info-recursive install-man: install-man1 installcheck-am: -maintainer-clean: maintainer-clean-am +maintainer-clean: maintainer-clean-recursive -rm -f $(am__CONFIG_DISTCLEAN_FILES) -rm -rf autom4te.cache maintainer-clean-am: distclean-am maintainer-clean-generic -mostlyclean: mostlyclean-am +mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-compile mostlyclean-generic +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + uninstall-am: uninstall-binPROGRAMS uninstall-binSCRIPTS \ uninstall-info-am uninstall-man +uninstall-info: uninstall-info-recursive + uninstall-man: uninstall-man1 -.PHONY: GTAGS all all-am check check-am clean clean-binPROGRAMS \ - clean-generic dist dist-all dist-gzip distcheck distclean \ +.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am clean \ + clean-binPROGRAMS clean-generic clean-recursive ctags \ + ctags-recursive dist dist-all dist-gzip distcheck distclean \ distclean-compile distclean-depend distclean-generic \ - distclean-hdr distclean-tags distcleancheck distdir dvi dvi-am \ - info info-am install install-am install-binPROGRAMS \ - install-binSCRIPTS install-data install-data-am install-exec \ - install-exec-am install-info install-info-am install-man \ - install-man1 install-strip installcheck installcheck-am \ - installdirs maintainer-clean maintainer-clean-generic \ - mostlyclean mostlyclean-compile mostlyclean-generic tags \ + distclean-hdr distclean-recursive distclean-tags distcleancheck \ + distdir distuninstallcheck dvi dvi-am dvi-recursive info \ + info-am info-recursive install install-am install-binPROGRAMS \ + install-binSCRIPTS install-data install-data-am \ + install-data-recursive install-exec install-exec-am \ + install-exec-recursive install-info install-info-am \ + install-info-recursive install-man install-man1 \ + install-recursive install-strip installcheck installcheck-am \ + installdirs installdirs-am installdirs-recursive \ + maintainer-clean maintainer-clean-generic \ + maintainer-clean-recursive mostlyclean mostlyclean-compile \ + mostlyclean-generic mostlyclean-recursive pdf pdf-am \ + pdf-recursive ps ps-am ps-recursive tags tags-recursive \ uninstall uninstall-am uninstall-binPROGRAMS \ - uninstall-binSCRIPTS uninstall-info-am uninstall-man \ - uninstall-man1 + uninstall-binSCRIPTS uninstall-info-am uninstall-info-recursive \ + uninstall-man uninstall-man1 uninstall-recursive # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. diff -ruN gworldclock-1.1-orig/aclocal.m4 gworldclock-1.1/aclocal.m4 --- gworldclock-1.1-orig/aclocal.m4 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/aclocal.m4 2003-07-26 14:17:27.000000000 +0900 @@ -1,6 +1,6 @@ -# aclocal.m4 generated automatically by aclocal 1.6.3 -*- Autoconf -*- +# generated automatically by aclocal 1.7.5 -*- Autoconf -*- -# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002 # Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, @@ -16,7 +16,7 @@ # This macro actually does too much some checks are only needed if # your package does certain things. But this isn't really a big deal. -# Copyright 1996, 1997, 1998, 1999, 2000, 2001, 2002 +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 # Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify @@ -34,16 +34,9 @@ # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA # 02111-1307, USA. -# serial 8 +# serial 10 -# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be -# written in clear, in which case automake, when reading aclocal.m4, -# will think it sees a *use*, and therefore will trigger all it's -# C support machinery. Also note that it means that autoscan, seeing -# CC etc. in the Makefile, will ask for an AC_PROG_CC use... - - -AC_PREREQ([2.52]) +AC_PREREQ([2.54]) # Autoconf 2.50 wants to disallow AM_ names. We explicitly allow # the ones we care about. @@ -69,6 +62,16 @@ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], @@ -76,8 +79,8 @@ AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl - AC_SUBST([PACKAGE], [AC_PACKAGE_TARNAME])dnl - AC_SUBST([VERSION], [AC_PACKAGE_VERSION])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) @@ -98,19 +101,41 @@ # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([no-dependencies],, -[AC_PROVIDE_IFELSE([AC_PROG_][CC], +[AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], - [define([AC_PROG_][CC], - defn([AC_PROG_][CC])[_AM_DEPENDENCIES(CC)])])dnl -AC_PROVIDE_IFELSE([AC_PROG_][CXX], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], - [define([AC_PROG_][CXX], - defn([AC_PROG_][CXX])[_AM_DEPENDENCIES(CXX)])])dnl + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ]) ]) + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $1 | $1:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) + # Copyright 2002 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify @@ -131,14 +156,14 @@ # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. -AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.6"]) +AC_DEFUN([AM_AUTOMAKE_VERSION],[am__api_version="1.7"]) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION so it can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], - [AM_AUTOMAKE_VERSION([1.6.3])]) + [AM_AUTOMAKE_VERSION([1.7.5])]) # Helper functions for option handling. -*- Autoconf -*- @@ -424,9 +449,42 @@ INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) -# serial 4 -*- Autoconf -*- +# -*- Autoconf -*- +# Copyright (C) 2003 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA +# 02111-1307, USA. + +# serial 1 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) -# Copyright 1999, 2000, 2001 Free Software Foundation, Inc. +# serial 5 -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -518,11 +576,17 @@ if depmode=$depmode \ source=conftest.c object=conftest.o \ depfile=conftest.Po tmpdepfile=conftest.TPo \ - $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && + $SHELL ./depcomp $depcc -c -o conftest.o conftest.c \ + >/dev/null 2>conftest.err && grep conftest.h conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - am_cv_$1_dependencies_compiler_type=$depmode - break + # icc doesn't choke on unknown options, it will just issue warnings + # (even with -Werror). So we grep stderr for any message + # that says an option was ignored. + if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi fi done @@ -533,6 +597,9 @@ fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) @@ -541,16 +608,8 @@ # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], -[rm -f .deps 2>/dev/null -mkdir .deps 2>/dev/null -if test -d .deps; then - DEPDIR=.deps -else - # MS-DOS does not allow filenames that begin with a dot. - DEPDIR=_deps -fi -rmdir .deps 2>/dev/null -AC_SUBST([DEPDIR]) +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) @@ -652,7 +711,9 @@ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) -# Copyright 2001 Free Software Foundation, Inc. -*- Autoconf -*- +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003 Free Software Foundation, Inc. # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -677,8 +738,9 @@ AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' -doit: +am__doit: @echo done +.PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) @@ -692,7 +754,7 @@ # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU @@ -706,9 +768,9 @@ _am_result=BSD fi fi -AC_SUBST(am__include) -AC_SUBST(am__quote) -AC_MSG_RESULT($_am_result) +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) @@ -752,7 +814,7 @@ fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then - AC_MSG_ERROR([conditional \"$1\" was never defined. + AC_MSG_ERROR([conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]) fi])]) @@ -779,60 +841,8 @@ # serial 6 -# When config.status generates a header, we must update the stamp-h file. -# This file resides in the same directory as the config header -# that is generated. We must strip everything past the first ":", -# and everything past the last "/". - -# _AM_DIRNAME(PATH) -# ----------------- -# Like AS_DIRNAME, only do it during macro expansion -AC_DEFUN([_AM_DIRNAME], - [m4_if(regexp([$1], [^.*[^/]//*[^/][^/]*/*$]), -1, - m4_if(regexp([$1], [^//\([^/]\|$\)]), -1, - m4_if(regexp([$1], [^/.*]), -1, - [.], - patsubst([$1], [^\(/\).*], [\1])), - patsubst([$1], [^\(//\)\([^/].*\|$\)], [\1])), - patsubst([$1], [^\(.*[^/]\)//*[^/][^/]*/*$], [\1]))[]dnl -])# _AM_DIRNAME - - -# The stamp files are numbered to have different names. -# We could number them on a directory basis, but that's additional -# complications, let's have a unique counter. -m4_define([_AM_STAMP_Count], [0]) - - -# _AM_STAMP(HEADER) -# ----------------- -# The name of the stamp file for HEADER. -AC_DEFUN([_AM_STAMP], -[m4_define([_AM_STAMP_Count], m4_incr(_AM_STAMP_Count))dnl -AS_ESCAPE(_AM_DIRNAME(patsubst([$1], - [:.*])))/stamp-h[]_AM_STAMP_Count]) - - -# _AM_CONFIG_HEADER(HEADER[:SOURCES], COMMANDS, INIT-COMMANDS) -# ------------------------------------------------------------ -# We used to try to get a real timestamp in stamp-h. But the fear is that -# that will cause unnecessary cvs conflicts. -AC_DEFUN([_AM_CONFIG_HEADER], -[# Add the stamp file to the list of files AC keeps track of, -# along with our hook. -AC_CONFIG_HEADERS([$1], - [# update the timestamp -echo 'timestamp for $1' >"_AM_STAMP([$1])" -$2], - [$3]) -])# _AM_CONFIG_HEADER - - -# AM_CONFIG_HEADER(HEADER[:SOURCES]..., COMMANDS, INIT-COMMANDS) -# -------------------------------------------------------------- -AC_DEFUN([AM_CONFIG_HEADER], -[AC_FOREACH([_AM_File], [$1], [_AM_CONFIG_HEADER(_AM_File, [$2], [$3])]) -])# AM_CONFIG_HEADER +# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. +AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) dnl PKG_CHECK_MODULES(GSTUFF, gtk+-2.0 >= 1.3 glib = 1.3.4, action-if, action-not) @@ -892,3 +902,2048 @@ +# gettext.m4 serial 20 (gettext-0.12) +dnl Copyright (C) 1995-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995-2000. +dnl Bruno Haible , 2000-2003. + +dnl Macro to add for using GNU gettext. + +dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). +dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The +dnl default (if it is not specified or empty) is 'no-libtool'. +dnl INTLSYMBOL should be 'external' for packages with no intl directory, +dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory. +dnl If INTLSYMBOL is 'use-libtool', then a libtool library +dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, +dnl depending on --{enable,disable}-{shared,static} and on the presence of +dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library +dnl $(top_builddir)/intl/libintl.a will be created. +dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext +dnl implementations (in libc or libintl) without the ngettext() function +dnl will be ignored. If NEEDSYMBOL is specified and is +dnl 'need-formatstring-macros', then GNU gettext implementations that don't +dnl support the ISO C 99 formatstring macros will be ignored. +dnl INTLDIR is used to find the intl libraries. If empty, +dnl the value `$(top_builddir)/intl/' is used. +dnl +dnl The result of the configuration is one of three cases: +dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled +dnl and used. +dnl Catalog format: GNU --> install in $(datadir) +dnl Catalog extension: .mo after installation, .gmo in source tree +dnl 2) GNU gettext has been found in the system's C library. +dnl Catalog format: GNU --> install in $(datadir) +dnl Catalog extension: .mo after installation, .gmo in source tree +dnl 3) No internationalization, always use English msgid. +dnl Catalog format: none +dnl Catalog extension: none +dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. +dnl The use of .gmo is historical (it was needed to avoid overwriting the +dnl GNU format catalogs when building on a platform with an X/Open gettext), +dnl but we keep it in order not to force irrelevant filename changes on the +dnl maintainers. +dnl +AC_DEFUN([AM_GNU_GETTEXT], +[ + dnl Argument checking. + ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], , + [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT +])])])])]) + ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , + [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT +])])])]) + define(gt_included_intl, ifelse([$1], [external], [no], [yes])) + define(gt_libtool_suffix_prefix, ifelse([$1], [use-libtool], [l], [])) + + AC_REQUIRE([AM_PO_SUBDIRS])dnl + ifelse(gt_included_intl, yes, [ + AC_REQUIRE([AM_INTL_SUBDIR])dnl + ]) + + dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + + dnl Sometimes libintl requires libiconv, so first search for libiconv. + dnl Ideally we would do this search only after the + dnl if test "$USE_NLS" = "yes"; then + dnl if test "$gt_cv_func_gnugettext_libc" != "yes"; then + dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT + dnl the configure script would need to contain the same shell code + dnl again, outside any 'if'. There are two solutions: + dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. + dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. + dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not + dnl documented, we avoid it. + ifelse(gt_included_intl, yes, , [ + AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) + ]) + + dnl Set USE_NLS. + AM_NLS + + ifelse(gt_included_intl, yes, [ + BUILD_INCLUDED_LIBINTL=no + USE_INCLUDED_LIBINTL=no + ]) + LIBINTL= + LTLIBINTL= + POSUB= + + dnl If we use NLS figure out what method + if test "$USE_NLS" = "yes"; then + gt_use_preinstalled_gnugettext=no + ifelse(gt_included_intl, yes, [ + AC_MSG_CHECKING([whether included gettext is requested]) + AC_ARG_WITH(included-gettext, + [ --with-included-gettext use the GNU gettext library included here], + nls_cv_force_use_gnu_gettext=$withval, + nls_cv_force_use_gnu_gettext=no) + AC_MSG_RESULT($nls_cv_force_use_gnu_gettext) + + nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" + if test "$nls_cv_force_use_gnu_gettext" != "yes"; then + ]) + dnl User does not insist on using GNU NLS library. Figure out what + dnl to use. If GNU gettext is available we use this. Else we have + dnl to fall back to GNU NLS library. + + dnl Add a version number to the cache macros. + define([gt_api_version], ifelse([$2], [need-formatstring-macros], 3, ifelse([$2], [need-ngettext], 2, 1))) + define([gt_cv_func_gnugettext_libc], [gt_cv_func_gnugettext]gt_api_version[_libc]) + define([gt_cv_func_gnugettext_libintl], [gt_cv_func_gnugettext]gt_api_version[_libintl]) + + AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc, + [AC_TRY_LINK([#include +]ifelse([$2], [need-formatstring-macros], +[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +changequote(,)dnl +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +changequote([,])dnl +], [])[extern int _nl_msg_cat_cntr; +extern int *_nl_domain_bindings;], + [bindtextdomain ("", ""); +return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_domain_bindings], + gt_cv_func_gnugettext_libc=yes, + gt_cv_func_gnugettext_libc=no)]) + + if test "$gt_cv_func_gnugettext_libc" != "yes"; then + dnl Sometimes libintl requires libiconv, so first search for libiconv. + ifelse(gt_included_intl, yes, , [ + AM_ICONV_LINK + ]) + dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL + dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) + dnl because that would add "-liconv" to LIBINTL and LTLIBINTL + dnl even if libiconv doesn't exist. + AC_LIB_LINKFLAGS_BODY([intl]) + AC_CACHE_CHECK([for GNU gettext in libintl], + gt_cv_func_gnugettext_libintl, + [gt_save_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $INCINTL" + gt_save_LIBS="$LIBS" + LIBS="$LIBS $LIBINTL" + dnl Now see whether libintl exists and does not depend on libiconv. + AC_TRY_LINK([#include +]ifelse([$2], [need-formatstring-macros], +[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +changequote(,)dnl +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +changequote([,])dnl +], [])[extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias ();], + [bindtextdomain ("", ""); +return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)], + gt_cv_func_gnugettext_libintl=yes, + gt_cv_func_gnugettext_libintl=no) + dnl Now see whether libintl exists and depends on libiconv. + if test "$gt_cv_func_gnugettext_libintl" != yes && test -n "$LIBICONV"; then + LIBS="$LIBS $LIBICONV" + AC_TRY_LINK([#include +]ifelse([$2], [need-formatstring-macros], +[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +changequote(,)dnl +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +changequote([,])dnl +], [])[extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias ();], + [bindtextdomain ("", ""); +return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)], + [LIBINTL="$LIBINTL $LIBICONV" + LTLIBINTL="$LTLIBINTL $LTLIBICONV" + gt_cv_func_gnugettext_libintl=yes + ]) + fi + CPPFLAGS="$gt_save_CPPFLAGS" + LIBS="$gt_save_LIBS"]) + fi + + dnl If an already present or preinstalled GNU gettext() is found, + dnl use it. But if this macro is used in GNU gettext, and GNU + dnl gettext is already preinstalled in libintl, we update this + dnl libintl. (Cf. the install rule in intl/Makefile.in.) + if test "$gt_cv_func_gnugettext_libc" = "yes" \ + || { test "$gt_cv_func_gnugettext_libintl" = "yes" \ + && test "$PACKAGE" != gettext-runtime \ + && test "$PACKAGE" != gettext-tools; }; then + gt_use_preinstalled_gnugettext=yes + else + dnl Reset the values set by searching for libintl. + LIBINTL= + LTLIBINTL= + INCINTL= + fi + + ifelse(gt_included_intl, yes, [ + if test "$gt_use_preinstalled_gnugettext" != "yes"; then + dnl GNU gettext is not found in the C library. + dnl Fall back on included GNU gettext library. + nls_cv_use_gnu_gettext=yes + fi + fi + + if test "$nls_cv_use_gnu_gettext" = "yes"; then + dnl Mark actions used to generate GNU NLS library. + BUILD_INCLUDED_LIBINTL=yes + USE_INCLUDED_LIBINTL=yes + LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV" + LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV" + LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` + fi + + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + dnl Mark actions to use GNU gettext tools. + CATOBJEXT=.gmo + fi + ]) + + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + AC_DEFINE(ENABLE_NLS, 1, + [Define to 1 if translation of program messages to the user's native language + is requested.]) + else + USE_NLS=no + fi + fi + + AC_MSG_CHECKING([whether to use NLS]) + AC_MSG_RESULT([$USE_NLS]) + if test "$USE_NLS" = "yes"; then + AC_MSG_CHECKING([where the gettext function comes from]) + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if test "$gt_cv_func_gnugettext_libintl" = "yes"; then + gt_source="external libintl" + else + gt_source="libc" + fi + else + gt_source="included intl directory" + fi + AC_MSG_RESULT([$gt_source]) + fi + + if test "$USE_NLS" = "yes"; then + + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if test "$gt_cv_func_gnugettext_libintl" = "yes"; then + AC_MSG_CHECKING([how to link with libintl]) + AC_MSG_RESULT([$LIBINTL]) + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) + fi + + dnl For backward compatibility. Some packages may be using this. + AC_DEFINE(HAVE_GETTEXT, 1, + [Define if the GNU gettext() function is already present or preinstalled.]) + AC_DEFINE(HAVE_DCGETTEXT, 1, + [Define if the GNU dcgettext() function is already present or preinstalled.]) + fi + + dnl We need to process the po/ directory. + POSUB=po + fi + + ifelse(gt_included_intl, yes, [ + dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL + dnl to 'yes' because some of the testsuite requires it. + if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then + BUILD_INCLUDED_LIBINTL=yes + fi + + dnl Make all variables we use known to autoconf. + AC_SUBST(BUILD_INCLUDED_LIBINTL) + AC_SUBST(USE_INCLUDED_LIBINTL) + AC_SUBST(CATOBJEXT) + + dnl For backward compatibility. Some configure.ins may be using this. + nls_cv_header_intl= + nls_cv_header_libgt= + + dnl For backward compatibility. Some Makefiles may be using this. + DATADIRNAME=share + AC_SUBST(DATADIRNAME) + + dnl For backward compatibility. Some Makefiles may be using this. + INSTOBJEXT=.mo + AC_SUBST(INSTOBJEXT) + + dnl For backward compatibility. Some Makefiles may be using this. + GENCAT=gencat + AC_SUBST(GENCAT) + + dnl For backward compatibility. Some Makefiles may be using this. + if test "$USE_INCLUDED_LIBINTL" = yes; then + INTLOBJS="\$(GETTOBJS)" + fi + AC_SUBST(INTLOBJS) + + dnl Enable libtool support if the surrounding package wishes it. + INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix + AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX) + ]) + + dnl For backward compatibility. Some Makefiles may be using this. + INTLLIBS="$LIBINTL" + AC_SUBST(INTLLIBS) + + dnl Make all documented variables known to autoconf. + AC_SUBST(LIBINTL) + AC_SUBST(LTLIBINTL) + AC_SUBST(POSUB) +]) + + +dnl Checks for all prerequisites of the intl subdirectory, +dnl except for INTL_LIBTOOL_SUFFIX_PREFIX (and possibly LIBTOOL), INTLOBJS, +dnl USE_INCLUDED_LIBINTL, BUILD_INCLUDED_LIBINTL. +AC_DEFUN([AM_INTL_SUBDIR], +[ + AC_REQUIRE([AC_PROG_INSTALL])dnl + AC_REQUIRE([AM_MKINSTALLDIRS])dnl + AC_REQUIRE([AC_PROG_CC])dnl + AC_REQUIRE([AC_CANONICAL_HOST])dnl + AC_REQUIRE([AC_PROG_RANLIB])dnl + AC_REQUIRE([AC_ISC_POSIX])dnl + AC_REQUIRE([AC_HEADER_STDC])dnl + AC_REQUIRE([AC_C_CONST])dnl + AC_REQUIRE([AC_C_INLINE])dnl + AC_REQUIRE([AC_TYPE_OFF_T])dnl + AC_REQUIRE([AC_TYPE_SIZE_T])dnl + AC_REQUIRE([AC_FUNC_ALLOCA])dnl + AC_REQUIRE([AC_FUNC_MMAP])dnl + AC_REQUIRE([jm_GLIBC21])dnl + AC_REQUIRE([gt_INTDIV0])dnl + AC_REQUIRE([jm_AC_TYPE_UINTMAX_T])dnl + AC_REQUIRE([gt_HEADER_INTTYPES_H])dnl + AC_REQUIRE([gt_INTTYPES_PRI])dnl + + AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \ +stdlib.h string.h unistd.h sys/param.h]) + AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getc_unlocked getcwd getegid \ +geteuid getgid getuid mempcpy munmap putenv setenv setlocale stpcpy \ +strcasecmp strdup strtoul tsearch __argz_count __argz_stringify __argz_next \ +__fsetlocking]) + + AM_ICONV + AM_LANGINFO_CODESET + if test $ac_cv_header_locale_h = yes; then + AM_LC_MESSAGES + fi + + dnl intl/plural.c is generated from intl/plural.y. It requires bison, + dnl because plural.y uses bison specific features. It requires at least + dnl bison-1.26 because earlier versions generate a plural.c that doesn't + dnl compile. + dnl bison is only needed for the maintainer (who touches plural.y). But in + dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put + dnl the rule in general Makefile. Now, some people carelessly touch the + dnl files or have a broken "make" program, hence the plural.c rule will + dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not + dnl present or too old. + AC_CHECK_PROGS([INTLBISON], [bison]) + if test -z "$INTLBISON"; then + ac_verc_fail=yes + else + dnl Found it, now check the version. + AC_MSG_CHECKING([version of bison]) +changequote(<<,>>)dnl + ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'` + case $ac_prog_version in + '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;; + 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*) +changequote([,])dnl + ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;; + *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;; + esac + AC_MSG_RESULT([$ac_prog_version]) + fi + if test $ac_verc_fail = yes; then + INTLBISON=: + fi +]) + + +dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) +AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) + +# po.m4 serial 1 (gettext-0.12) +dnl Copyright (C) 1995-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995-2000. +dnl Bruno Haible , 2000-2003. + +dnl Checks for all prerequisites of the po subdirectory. +AC_DEFUN([AM_PO_SUBDIRS], +[ + AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AC_PROG_INSTALL])dnl + AC_REQUIRE([AM_MKINSTALLDIRS])dnl + AC_REQUIRE([AM_NLS])dnl + + dnl Perform the following tests also if --disable-nls has been given, + dnl because they are needed for "make dist" to work. + + dnl Search for GNU msgfmt in the PATH. + dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. + dnl The second test excludes FreeBSD msgfmt. + AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, + [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 && + (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], + :) + AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) + + dnl Search for GNU xgettext 0.12 or newer in the PATH. + dnl The first test excludes Solaris xgettext and early GNU xgettext versions. + dnl The second test excludes FreeBSD xgettext. + AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, + [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && + (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], + :) + dnl Remove leftover from FreeBSD xgettext call. + rm -f messages.po + + dnl Search for GNU msgmerge 0.11 or newer in the PATH. + AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, + [$ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1], :) + + dnl This could go away some day; the PATH_PROG_WITH_TEST already does it. + dnl Test whether we really found GNU msgfmt. + if test "$GMSGFMT" != ":"; then + dnl If it is no GNU msgfmt we define it as : so that the + dnl Makefiles still can work. + if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 && + (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + : ; + else + GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'` + AC_MSG_RESULT( + [found $GMSGFMT program is not GNU msgfmt; ignore it]) + GMSGFMT=":" + fi + fi + + dnl This could go away some day; the PATH_PROG_WITH_TEST already does it. + dnl Test whether we really found GNU xgettext. + if test "$XGETTEXT" != ":"; then + dnl If it is no GNU xgettext we define it as : so that the + dnl Makefiles still can work. + if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && + (if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + : ; + else + AC_MSG_RESULT( + [found xgettext program is not GNU xgettext; ignore it]) + XGETTEXT=":" + fi + dnl Remove leftover from FreeBSD xgettext call. + rm -f messages.po + fi + + AC_OUTPUT_COMMANDS([ + for ac_file in $CONFIG_FILES; do + # Support "outfile[:infile[:infile...]]" + case "$ac_file" in + *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + esac + # PO directories have a Makefile.in generated from Makefile.in.in. + case "$ac_file" in */Makefile.in) + # Adjust a relative srcdir. + ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` + ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" + ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` + # In autoconf-2.13 it is called $ac_given_srcdir. + # In autoconf-2.50 it is called $srcdir. + test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" + case "$ac_given_srcdir" in + .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; + /*) top_srcdir="$ac_given_srcdir" ;; + *) top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then + rm -f "$ac_dir/POTFILES" + test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" + cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" + POMAKEFILEDEPS="POTFILES.in" + # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend + # on $ac_dir but don't depend on user-specified configuration + # parameters. + if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then + # The LINGUAS file contains the set of available languages. + if test -n "$OBSOLETE_ALL_LINGUAS"; then + test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" + fi + ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"` + # Hide the ALL_LINGUAS assigment from automake. + eval 'ALL_LINGUAS''=$ALL_LINGUAS_' + POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" + else + # The set of available languages was given in configure.in. + eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' + fi + case "$ac_given_srcdir" in + .) srcdirpre= ;; + *) srcdirpre='$(srcdir)/' ;; + esac + POFILES= + GMOFILES= + UPDATEPOFILES= + DUMMYPOFILES= + for lang in $ALL_LINGUAS; do + POFILES="$POFILES $srcdirpre$lang.po" + GMOFILES="$GMOFILES $srcdirpre$lang.gmo" + UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" + DUMMYPOFILES="$DUMMYPOFILES $lang.nop" + done + # CATALOGS depends on both $ac_dir and the user's LINGUAS + # environment variable. + INST_LINGUAS= + if test -n "$ALL_LINGUAS"; then + for presentlang in $ALL_LINGUAS; do + useit=no + if test "%UNSET%" != "$LINGUAS"; then + desiredlanguages="$LINGUAS" + else + desiredlanguages="$ALL_LINGUAS" + fi + for desiredlang in $desiredlanguages; do + # Use the presentlang catalog if desiredlang is + # a. equal to presentlang, or + # b. a variant of presentlang (because in this case, + # presentlang can be used as a fallback for messages + # which are not translated in the desiredlang catalog). + case "$desiredlang" in + "$presentlang"*) useit=yes;; + esac + done + if test $useit = yes; then + INST_LINGUAS="$INST_LINGUAS $presentlang" + fi + done + fi + CATALOGS= + if test -n "$INST_LINGUAS"; then + for lang in $INST_LINGUAS; do + CATALOGS="$CATALOGS $lang.gmo" + done + fi + test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" + sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" + for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do + if test -f "$f"; then + case "$f" in + *.orig | *.bak | *~) ;; + *) cat "$f" >> "$ac_dir/Makefile" ;; + esac + fi + done + fi + ;; + esac + done], + [# Capture the value of obsolete ALL_LINGUAS because we need it to compute + # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it + # from automake. + eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' + # Capture the value of LINGUAS because we need it to compute CATALOGS. + LINGUAS="${LINGUAS-%UNSET%}" + ]) +]) + +# nls.m4 serial 1 (gettext-0.12) +dnl Copyright (C) 1995-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995-2000. +dnl Bruno Haible , 2000-2003. + +AC_DEFUN([AM_NLS], +[ + AC_MSG_CHECKING([whether NLS is requested]) + dnl Default is enabled NLS + AC_ARG_ENABLE(nls, + [ --disable-nls do not use Native Language Support], + USE_NLS=$enableval, USE_NLS=yes) + AC_MSG_RESULT($USE_NLS) + AC_SUBST(USE_NLS) +]) + +AC_DEFUN([AM_MKINSTALLDIRS], +[ + dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly + dnl find the mkinstalldirs script in another subdir but $(top_srcdir). + dnl Try to locate it. + MKINSTALLDIRS= + if test -n "$ac_aux_dir"; then + case "$ac_aux_dir" in + /*) MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ;; + *) MKINSTALLDIRS="\$(top_builddir)/$ac_aux_dir/mkinstalldirs" ;; + esac + fi + if test -z "$MKINSTALLDIRS"; then + MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" + fi + AC_SUBST(MKINSTALLDIRS) +]) + +# progtest.m4 serial 3 (gettext-0.12) +dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1996. + +# Search path for a program which passes the given test. + +dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, +dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +AC_DEFUN([AM_PATH_PROG_WITH_TEST], +[ +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "$2", so it can be a program name with args. +set dummy $2; ac_word=[$]2 +AC_MSG_CHECKING([for $ac_word]) +AC_CACHE_VAL(ac_cv_path_$1, +[case "[$]$1" in + [[\\/]]* | ?:[[\\/]]*) + ac_cv_path_$1="[$]$1" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in ifelse([$5], , $PATH, [$5]); do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + if [$3]; then + ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" +dnl If no 4th arg is given, leave the cache variable unset, +dnl so AC_PATH_PROGS will keep looking. +ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +])dnl + ;; +esac])dnl +$1="$ac_cv_path_$1" +if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then + AC_MSG_RESULT([$]$1) +else + AC_MSG_RESULT(no) +fi +AC_SUBST($1)dnl +]) + +# lib-prefix.m4 serial 3 (gettext-0.12.2) +dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and +dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't +dnl require excessive bracketing. +ifdef([AC_HELP_STRING], +[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], +[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) + +dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed +dnl to access previously installed libraries. The basic assumption is that +dnl a user will want packages to use other packages he previously installed +dnl with the same --prefix option. +dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate +dnl libraries, but is otherwise very convenient. +AC_DEFUN([AC_LIB_PREFIX], +[ + AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) + AC_REQUIRE([AC_PROG_CC]) + AC_REQUIRE([AC_CANONICAL_HOST]) + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + dnl By default, look in $includedir and $libdir. + use_additional=yes + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + AC_LIB_ARG_WITH([lib-prefix], +[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib + --without-lib-prefix don't search for libraries in includedir and libdir], +[ + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + else + additional_includedir="$withval/include" + additional_libdir="$withval/lib" + fi + fi +]) + if test $use_additional = yes; then + dnl Potentially add $additional_includedir to $CPPFLAGS. + dnl But don't add it + dnl 1. if it's the standard /usr/include, + dnl 2. if it's already present in $CPPFLAGS, + dnl 3. if it's /usr/local/include and we are using GCC on Linux, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + for x in $CPPFLAGS; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + dnl Really add $additional_includedir to $CPPFLAGS. + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" + fi + fi + fi + fi + dnl Potentially add $additional_libdir to $LDFLAGS. + dnl But don't add it + dnl 1. if it's the standard /usr/lib, + dnl 2. if it's already present in $LDFLAGS, + dnl 3. if it's /usr/local/lib and we are using GCC on Linux, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_libdir" != "X/usr/lib"; then + haveit= + for x in $LDFLAGS; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test "X$additional_libdir" = "X/usr/local/lib"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LDFLAGS. + LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" + fi + fi + fi + fi + fi +]) + +dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, +dnl acl_final_exec_prefix, containing the values to which $prefix and +dnl $exec_prefix will expand at the end of the configure script. +AC_DEFUN([AC_LIB_PREPARE_PREFIX], +[ + dnl Unfortunately, prefix and exec_prefix get only finally determined + dnl at the end of configure. + if test "X$prefix" = "XNONE"; then + acl_final_prefix="$ac_default_prefix" + else + acl_final_prefix="$prefix" + fi + if test "X$exec_prefix" = "XNONE"; then + acl_final_exec_prefix='${prefix}' + else + acl_final_exec_prefix="$exec_prefix" + fi + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" + prefix="$acl_save_prefix" +]) + +dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the +dnl variables prefix and exec_prefix bound to the values they will have +dnl at the end of the configure script. +AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], +[ + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + $1 + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" +]) + +# lib-link.m4 serial 4 (gettext-0.12) +dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and +dnl the libraries corresponding to explicit and implicit dependencies. +dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and +dnl augments the CPPFLAGS variable. +AC_DEFUN([AC_LIB_LINKFLAGS], +[ + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + define([Name],[translit([$1],[./-], [___])]) + define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ + AC_LIB_LINKFLAGS_BODY([$1], [$2]) + ac_cv_lib[]Name[]_libs="$LIB[]NAME" + ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" + ac_cv_lib[]Name[]_cppflags="$INC[]NAME" + ]) + LIB[]NAME="$ac_cv_lib[]Name[]_libs" + LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" + INC[]NAME="$ac_cv_lib[]Name[]_cppflags" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) + AC_SUBST([LIB]NAME) + AC_SUBST([LTLIB]NAME) + dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the + dnl results of this search when this library appears as a dependency. + HAVE_LIB[]NAME=yes + undefine([Name]) + undefine([NAME]) +]) + +dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) +dnl searches for libname and the libraries corresponding to explicit and +dnl implicit dependencies, together with the specified include files and +dnl the ability to compile and link the specified testcode. If found, it +dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and +dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and +dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs +dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. +AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], +[ + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + define([Name],[translit([$1],[./-], [___])]) + define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + + dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME + dnl accordingly. + AC_LIB_LINKFLAGS_BODY([$1], [$2]) + + dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, + dnl because if the user has installed lib[]Name and not disabled its use + dnl via --without-lib[]Name-prefix, he wants to use it. + ac_save_CPPFLAGS="$CPPFLAGS" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) + + AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ + ac_save_LIBS="$LIBS" + LIBS="$LIBS $LIB[]NAME" + AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) + LIBS="$ac_save_LIBS" + ]) + if test "$ac_cv_lib[]Name" = yes; then + HAVE_LIB[]NAME=yes + AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) + AC_MSG_CHECKING([how to link with lib[]$1]) + AC_MSG_RESULT([$LIB[]NAME]) + else + HAVE_LIB[]NAME=no + dnl If $LIB[]NAME didn't lead to a usable library, we don't need + dnl $INC[]NAME either. + CPPFLAGS="$ac_save_CPPFLAGS" + LIB[]NAME= + LTLIB[]NAME= + fi + AC_SUBST([HAVE_LIB]NAME) + AC_SUBST([LIB]NAME) + AC_SUBST([LTLIB]NAME) + undefine([Name]) + undefine([NAME]) +]) + +dnl Determine the platform dependent parameters needed to use rpath: +dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator, +dnl hardcode_direct, hardcode_minus_L. +AC_DEFUN([AC_LIB_RPATH], +[ + AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS + AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld + AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host + AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir + AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ + CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ + ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh + . ./conftest.sh + rm -f ./conftest.sh + acl_cv_rpath=done + ]) + wl="$acl_cv_wl" + libext="$acl_cv_libext" + shlibext="$acl_cv_shlibext" + hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" + hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" + hardcode_direct="$acl_cv_hardcode_direct" + hardcode_minus_L="$acl_cv_hardcode_minus_L" + dnl Determine whether the user wants rpath handling at all. + AC_ARG_ENABLE(rpath, + [ --disable-rpath do not hardcode runtime library paths], + :, enable_rpath=yes) +]) + +dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and +dnl the libraries corresponding to explicit and implicit dependencies. +dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. +AC_DEFUN([AC_LIB_LINKFLAGS_BODY], +[ + define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + dnl By default, look in $includedir and $libdir. + use_additional=yes + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + AC_LIB_ARG_WITH([lib$1-prefix], +[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib + --without-lib$1-prefix don't search for lib$1 in includedir and libdir], +[ + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + else + additional_includedir="$withval/include" + additional_libdir="$withval/lib" + fi + fi +]) + dnl Search the library and its dependencies in $additional_libdir and + dnl $LDFLAGS. Using breadth-first-seach. + LIB[]NAME= + LTLIB[]NAME= + INC[]NAME= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='$1 $2' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + dnl See if it was already located by an earlier AC_LIB_LINKFLAGS + dnl or AC_LIB_HAVE_LINKFLAGS call. + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" + else + dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined + dnl that this library doesn't exist. So just drop it. + : + fi + else + dnl Search the library lib$name in $additional_libdir and $LDFLAGS + dnl and the already constructed $LIBNAME/$LTLIBNAME. + found_dir= + found_la= + found_so= + found_a= + if test $use_additional = yes; then + if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then + found_dir="$additional_libdir" + found_so="$additional_libdir/lib$name.$shlibext" + if test -f "$additional_libdir/lib$name.la"; then + found_la="$additional_libdir/lib$name.la" + fi + else + if test -f "$additional_libdir/lib$name.$libext"; then + found_dir="$additional_libdir" + found_a="$additional_libdir/lib$name.$libext" + if test -f "$additional_libdir/lib$name.la"; then + found_la="$additional_libdir/lib$name.la" + fi + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then + found_dir="$dir" + found_so="$dir/lib$name.$shlibext" + if test -f "$dir/lib$name.la"; then + found_la="$dir/lib$name.la" + fi + else + if test -f "$dir/lib$name.$libext"; then + found_dir="$dir" + found_a="$dir/lib$name.$libext" + if test -f "$dir/lib$name.la"; then + found_la="$dir/lib$name.la" + fi + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + dnl Found the library. + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + dnl Linking with a shared library. We attempt to hardcode its + dnl directory into the executable's runpath, unless it's the + dnl standard /usr/lib. + if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then + dnl No hardcoding is needed. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + dnl Use an explicit option to hardcode DIR into the resulting + dnl binary. + dnl Potentially add DIR to ltrpathdirs. + dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + dnl The hardcoding into $LIBNAME is system dependent. + if test "$hardcode_direct" = yes; then + dnl Using DIR/libNAME.so during linking hardcodes DIR into the + dnl resulting binary. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then + dnl Use an explicit option to hardcode DIR into the resulting + dnl binary. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + dnl Potentially add DIR to rpathdirs. + dnl The rpathdirs will be appended to $LIBNAME at the end. + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + dnl Rely on "-L$found_dir". + dnl But don't add it if it's already contained in the LDFLAGS + dnl or the already constructed $LIBNAME + haveit= + for x in $LDFLAGS $LIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" + fi + if test "$hardcode_minus_L" != no; then + dnl FIXME: Not sure whether we should use + dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" + dnl here. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH + dnl here, because this doesn't fit in flags passed to the + dnl compiler. So give up. No hardcoding. This affects only + dnl very old systems. + dnl FIXME: Not sure whether we should use + dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" + dnl here. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + dnl Linking with a static library. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" + else + dnl We shouldn't come here, but anyway it's good to have a + dnl fallback. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" + fi + fi + dnl Assume the include files are nearby. + additional_includedir= + case "$found_dir" in + */lib | */lib/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + dnl Potentially add $additional_includedir to $INCNAME. + dnl But don't add it + dnl 1. if it's the standard /usr/include, + dnl 2. if it's /usr/local/include and we are using GCC on Linux, + dnl 3. if it's already present in $CPPFLAGS or the already + dnl constructed $INCNAME, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INC[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + dnl Really add $additional_includedir to $INCNAME. + INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + dnl Look for dependencies. + if test -n "$found_la"; then + dnl Read the .la file. It defines the variables + dnl dlname, library_names, old_library, dependency_libs, current, + dnl age, revision, installed, dlopen, dlpreopen, libdir. + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + dnl We use only dependency_libs. + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. + dnl But don't add it + dnl 1. if it's the standard /usr/lib, + dnl 2. if it's /usr/local/lib and we are using GCC on Linux, + dnl 3. if it's already present in $LDFLAGS or the already + dnl constructed $LIBNAME, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_libdir" != "X/usr/lib"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/lib"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LIBNAME. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LTLIBNAME. + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + dnl Potentially add DIR to rpathdirs. + dnl The rpathdirs will be appended to $LIBNAME at the end. + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + dnl Potentially add DIR to ltrpathdirs. + dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + dnl Handle this in the next round. + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + dnl Handle this in the next round. Throw away the .la's + dnl directory; it is already contained in a preceding -L + dnl option. + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + dnl Most likely an immediate library name. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" + ;; + esac + done + fi + else + dnl Didn't find the library; assume it is in the system directories + dnl known to the linker and runtime loader. (All the system + dnl directories known to the linker should also be known to the + dnl runtime loader, otherwise the system is severely misconfigured.) + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$hardcode_libdir_separator"; then + dnl Weird platform: only the last -rpath option counts, the user must + dnl pass all path elements in one option. We can arrange that for a + dnl single library, but not when more than one $LIBNAMEs are used. + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" + done + dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl. + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" + else + dnl The -rpath options are cumulative. + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + dnl When using libtool, the option that works for both libraries and + dnl executables is -R. The -R options are cumulative. + for found_dir in $ltrpathdirs; do + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" + done + fi +]) + +dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, +dnl unless already present in VAR. +dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes +dnl contains two or three consecutive elements that belong together. +AC_DEFUN([AC_LIB_APPENDTOVAR], +[ + for element in [$2]; do + haveit= + for x in $[$1]; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + [$1]="${[$1]}${[$1]:+ }$element" + fi + done +]) + +# lib-ld.m4 serial 2 (gettext-0.12) +dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl Subroutines of libtool.m4, +dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision +dnl with libtool.m4. + +dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. +AC_DEFUN([AC_LIB_PROG_LD_GNU], +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld, +[# I'd rather use --version here, but apparently some GNU ld's only accept -v. +if $LD -v 2>&1 &5; then + acl_cv_prog_gnu_ld=yes +else + acl_cv_prog_gnu_ld=no +fi]) +with_gnu_ld=$acl_cv_prog_gnu_ld +]) + +dnl From libtool-1.4. Sets the variable LD. +AC_DEFUN([AC_LIB_PROG_LD], +[AC_ARG_WITH(gnu-ld, +[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], +test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by GCC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]* | [A-Za-z]:[\\/]*)] + [re_direlt='/[^/][^/]*/\.\./'] + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(acl_cv_path_LD, +[if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + acl_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + test "$with_gnu_ld" != no && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$ac_save_ifs" +else + acl_cv_path_LD="$LD" # Let the user override the test with a path. +fi]) +LD="$acl_cv_path_LD" +if test -n "$LD"; then + AC_MSG_RESULT($LD) +else + AC_MSG_RESULT(no) +fi +test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +AC_LIB_PROG_LD_GNU +]) + +# iconv.m4 serial AM4 (gettext-0.11.3) +dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], +[ + dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + + dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV + dnl accordingly. + AC_LIB_LINKFLAGS_BODY([iconv]) +]) + +AC_DEFUN([AM_ICONV_LINK], +[ + dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and + dnl those with the standalone portable GNU libiconv installed). + + dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV + dnl accordingly. + AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) + + dnl Add $INCICONV to CPPFLAGS before performing the following checks, + dnl because if the user has installed libiconv and not disabled its use + dnl via --without-libiconv-prefix, he wants to use it. The first + dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed. + am_save_CPPFLAGS="$CPPFLAGS" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) + + AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [ + am_cv_func_iconv="no, consider installing GNU libiconv" + am_cv_lib_iconv=no + AC_TRY_LINK([#include +#include ], + [iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd);], + am_cv_func_iconv=yes) + if test "$am_cv_func_iconv" != yes; then + am_save_LIBS="$LIBS" + LIBS="$LIBS $LIBICONV" + AC_TRY_LINK([#include +#include ], + [iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd);], + am_cv_lib_iconv=yes + am_cv_func_iconv=yes) + LIBS="$am_save_LIBS" + fi + ]) + if test "$am_cv_func_iconv" = yes; then + AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.]) + fi + if test "$am_cv_lib_iconv" = yes; then + AC_MSG_CHECKING([how to link with libiconv]) + AC_MSG_RESULT([$LIBICONV]) + else + dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV + dnl either. + CPPFLAGS="$am_save_CPPFLAGS" + LIBICONV= + LTLIBICONV= + fi + AC_SUBST(LIBICONV) + AC_SUBST(LTLIBICONV) +]) + +AC_DEFUN([AM_ICONV], +[ + AM_ICONV_LINK + if test "$am_cv_func_iconv" = yes; then + AC_MSG_CHECKING([for iconv declaration]) + AC_CACHE_VAL(am_cv_proto_iconv, [ + AC_TRY_COMPILE([ +#include +#include +extern +#ifdef __cplusplus +"C" +#endif +#if defined(__STDC__) || defined(__cplusplus) +size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); +#else +size_t iconv(); +#endif +], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const") + am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) + am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` + AC_MSG_RESULT([$]{ac_t:- + }[$]am_cv_proto_iconv) + AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1, + [Define as const if the declaration of iconv() needs const.]) + fi +]) + +# isc-posix.m4 serial 2 (gettext-0.11.2) +dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +# This file is not needed with autoconf-2.53 and newer. Remove it in 2005. + +# This test replaces the one in autoconf. +# Currently this macro should have the same name as the autoconf macro +# because gettext's gettext.m4 (distributed in the automake package) +# still uses it. Otherwise, the use in gettext.m4 makes autoheader +# give these diagnostics: +# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX +# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX + +undefine([AC_ISC_POSIX]) + +AC_DEFUN([AC_ISC_POSIX], + [ + dnl This test replaces the obsolescent AC_ISC_POSIX kludge. + AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"]) + ] +) + +# glibc21.m4 serial 2 (fileutils-4.1.3, gettext-0.10.40) +dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +# Test for the GNU C Library, version 2.1 or newer. +# From Bruno Haible. + +AC_DEFUN([jm_GLIBC21], + [ + AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer, + ac_cv_gnu_library_2_1, + [AC_EGREP_CPP([Lucky GNU user], + [ +#include +#ifdef __GNU_LIBRARY__ + #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2) + Lucky GNU user + #endif +#endif + ], + ac_cv_gnu_library_2_1=yes, + ac_cv_gnu_library_2_1=no) + ] + ) + AC_SUBST(GLIBC21) + GLIBC21="$ac_cv_gnu_library_2_1" + ] +) + +# intdiv0.m4 serial 1 (gettext-0.11.3) +dnl Copyright (C) 2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +AC_DEFUN([gt_INTDIV0], +[ + AC_REQUIRE([AC_PROG_CC])dnl + AC_REQUIRE([AC_CANONICAL_HOST])dnl + + AC_CACHE_CHECK([whether integer division by zero raises SIGFPE], + gt_cv_int_divbyzero_sigfpe, + [ + AC_TRY_RUN([ +#include +#include + +static void +#ifdef __cplusplus +sigfpe_handler (int sig) +#else +sigfpe_handler (sig) int sig; +#endif +{ + /* Exit with code 0 if SIGFPE, with code 1 if any other signal. */ + exit (sig != SIGFPE); +} + +int x = 1; +int y = 0; +int z; +int nan; + +int main () +{ + signal (SIGFPE, sigfpe_handler); +/* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP. */ +#if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP) + signal (SIGTRAP, sigfpe_handler); +#endif +/* Linux/SPARC yields signal SIGILL. */ +#if defined (__sparc__) && defined (__linux__) + signal (SIGILL, sigfpe_handler); +#endif + + z = x / y; + nan = y / y; + exit (1); +} +], gt_cv_int_divbyzero_sigfpe=yes, gt_cv_int_divbyzero_sigfpe=no, + [ + # Guess based on the CPU. + case "$host_cpu" in + alpha* | i[34567]86 | m68k | s390*) + gt_cv_int_divbyzero_sigfpe="guessing yes";; + *) + gt_cv_int_divbyzero_sigfpe="guessing no";; + esac + ]) + ]) + case "$gt_cv_int_divbyzero_sigfpe" in + *yes) value=1;; + *) value=0;; + esac + AC_DEFINE_UNQUOTED(INTDIV0_RAISES_SIGFPE, $value, + [Define if integer division by zero raises signal SIGFPE.]) +]) + +# uintmax_t.m4 serial 7 (gettext-0.12) +dnl Copyright (C) 1997-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Paul Eggert. + +AC_PREREQ(2.13) + +# Define uintmax_t to 'unsigned long' or 'unsigned long long' +# if it is not already defined in or . + +AC_DEFUN([jm_AC_TYPE_UINTMAX_T], +[ + AC_REQUIRE([jm_AC_HEADER_INTTYPES_H]) + AC_REQUIRE([jm_AC_HEADER_STDINT_H]) + if test $jm_ac_cv_header_inttypes_h = no && test $jm_ac_cv_header_stdint_h = no; then + AC_REQUIRE([jm_AC_TYPE_UNSIGNED_LONG_LONG]) + test $ac_cv_type_unsigned_long_long = yes \ + && ac_type='unsigned long long' \ + || ac_type='unsigned long' + AC_DEFINE_UNQUOTED(uintmax_t, $ac_type, + [Define to unsigned long or unsigned long long + if and don't define.]) + else + AC_DEFINE(HAVE_UINTMAX_T, 1, + [Define if you have the 'uintmax_t' type in or .]) + fi +]) + +# inttypes_h.m4 serial 5 (gettext-0.12) +dnl Copyright (C) 1997-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Paul Eggert. + +# Define HAVE_INTTYPES_H_WITH_UINTMAX if exists, +# doesn't clash with , and declares uintmax_t. + +AC_DEFUN([jm_AC_HEADER_INTTYPES_H], +[ + AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h, + [AC_TRY_COMPILE( + [#include +#include ], + [uintmax_t i = (uintmax_t) -1;], + jm_ac_cv_header_inttypes_h=yes, + jm_ac_cv_header_inttypes_h=no)]) + if test $jm_ac_cv_header_inttypes_h = yes; then + AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H_WITH_UINTMAX, 1, + [Define if exists, doesn't clash with , + and declares uintmax_t. ]) + fi +]) + +# stdint_h.m4 serial 3 (gettext-0.12) +dnl Copyright (C) 1997-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Paul Eggert. + +# Define HAVE_STDINT_H_WITH_UINTMAX if exists, +# doesn't clash with , and declares uintmax_t. + +AC_DEFUN([jm_AC_HEADER_STDINT_H], +[ + AC_CACHE_CHECK([for stdint.h], jm_ac_cv_header_stdint_h, + [AC_TRY_COMPILE( + [#include +#include ], + [uintmax_t i = (uintmax_t) -1;], + jm_ac_cv_header_stdint_h=yes, + jm_ac_cv_header_stdint_h=no)]) + if test $jm_ac_cv_header_stdint_h = yes; then + AC_DEFINE_UNQUOTED(HAVE_STDINT_H_WITH_UINTMAX, 1, + [Define if exists, doesn't clash with , + and declares uintmax_t. ]) + fi +]) + +# ulonglong.m4 serial 2 (fileutils-4.0.32, gettext-0.10.40) +dnl Copyright (C) 1999-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Paul Eggert. + +AC_DEFUN([jm_AC_TYPE_UNSIGNED_LONG_LONG], +[ + AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long, + [AC_TRY_LINK([unsigned long long ull = 1; int i = 63;], + [unsigned long long ullmax = (unsigned long long) -1; + return ull << i | ull >> i | ullmax / ull | ullmax % ull;], + ac_cv_type_unsigned_long_long=yes, + ac_cv_type_unsigned_long_long=no)]) + if test $ac_cv_type_unsigned_long_long = yes; then + AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1, + [Define if you have the unsigned long long type.]) + fi +]) + +# inttypes.m4 serial 1 (gettext-0.11.4) +dnl Copyright (C) 1997-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Paul Eggert. + +# Define HAVE_INTTYPES_H if exists and doesn't clash with +# . + +AC_DEFUN([gt_HEADER_INTTYPES_H], +[ + AC_CACHE_CHECK([for inttypes.h], gt_cv_header_inttypes_h, + [ + AC_TRY_COMPILE( + [#include +#include ], + [], gt_cv_header_inttypes_h=yes, gt_cv_header_inttypes_h=no) + ]) + if test $gt_cv_header_inttypes_h = yes; then + AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1, + [Define if exists and doesn't clash with .]) + fi +]) + +# inttypes-pri.m4 serial 1 (gettext-0.11.4) +dnl Copyright (C) 1997-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +# Define PRI_MACROS_BROKEN if exists and defines the PRI* +# macros to non-string values. This is the case on AIX 4.3.3. + +AC_DEFUN([gt_INTTYPES_PRI], +[ + AC_REQUIRE([gt_HEADER_INTTYPES_H]) + if test $gt_cv_header_inttypes_h = yes; then + AC_CACHE_CHECK([whether the inttypes.h PRIxNN macros are broken], + gt_cv_inttypes_pri_broken, + [ + AC_TRY_COMPILE([#include +#ifdef PRId32 +char *p = PRId32; +#endif +], [], gt_cv_inttypes_pri_broken=no, gt_cv_inttypes_pri_broken=yes) + ]) + fi + if test "$gt_cv_inttypes_pri_broken" = yes; then + AC_DEFINE_UNQUOTED(PRI_MACROS_BROKEN, 1, + [Define if exists and defines unusable PRI* macros.]) + fi +]) + +# codeset.m4 serial AM1 (gettext-0.10.40) +dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +AC_DEFUN([AM_LANGINFO_CODESET], +[ + AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset, + [AC_TRY_LINK([#include ], + [char* cs = nl_langinfo(CODESET);], + am_cv_langinfo_codeset=yes, + am_cv_langinfo_codeset=no) + ]) + if test $am_cv_langinfo_codeset = yes; then + AC_DEFINE(HAVE_LANGINFO_CODESET, 1, + [Define if you have and nl_langinfo(CODESET).]) + fi +]) + +# lcmessage.m4 serial 3 (gettext-0.11.3) +dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995. + +# Check whether LC_MESSAGES is available in . + +AC_DEFUN([AM_LC_MESSAGES], +[ + AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, + [AC_TRY_LINK([#include ], [return LC_MESSAGES], + am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) + if test $am_cv_val_LC_MESSAGES = yes; then + AC_DEFINE(HAVE_LC_MESSAGES, 1, + [Define if your file defines LC_MESSAGES.]) + fi +]) + diff -ruN gworldclock-1.1-orig/config.guess gworldclock-1.1/config.guess --- gworldclock-1.1-orig/config.guess 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/config.guess 2003-07-26 12:45:22.000000000 +0900 @@ -0,0 +1,1391 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003 Free Software Foundation, Inc. + +timestamp='2003-05-19' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Originally written by Per Bothner . +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d -q "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep __ELF__ >/dev/null + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit 0 ;; + amiga:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + arc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + hp300:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + macppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvmeppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + pmax:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sgi:OpenBSD:*:*) + echo mipseb-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sun3:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + wgrisc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:OpenBSD:*:*) + echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + alpha:OSF1:*:*) + if test $UNAME_RELEASE = "V4.0"; then + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + fi + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[VTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit 0 ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit 0 ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit 0 ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit 0;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit 0 ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit 0 ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit 0 ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit 0;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit 0;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit 0 ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit 0 ;; + DRS?6000:UNIX_SV:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7 && exit 0 ;; + esac ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + i86pc:SunOS:5.*:*) + echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit 0 ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit 0 ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit 0 ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit 0 ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit 0 ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit 0 ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit 0 ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit 0 ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit 0 ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit 0 ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit 0 ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit 0 ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c \ + && $dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \ + && exit 0 + echo mips-mips-riscos${UNAME_RELEASE} + exit 0 ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit 0 ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit 0 ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit 0 ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit 0 ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit 0 ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit 0 ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit 0 ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit 0 ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit 0 ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit 0 ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit 0 ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit 0 ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit 0 ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit 0 ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit 0 ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 + echo rs6000-ibm-aix3.2.5 + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit 0 ;; + *:AIX:*:[45]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit 0 ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit 0 ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit 0 ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit 0 ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit 0 ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit 0 ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit 0 ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit 0 ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + # avoid double evaluation of $set_cc_for_build + test -n "$CC_FOR_BUILD" || eval $set_cc_for_build + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E -) | grep __LP64__ >/dev/null + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit 0 ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit 0 ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && $dummy && exit 0 + echo unknown-hitachi-hiuxwe2 + exit 0 ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit 0 ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit 0 ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit 0 ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit 0 ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit 0 ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit 0 ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit 0 ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit 0 ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit 0 ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit 0 ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit 0 ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + *:UNICOS/mp:*:*) + echo nv1-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit 0 ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit 0 ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit 0 ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit 0 ;; + *:FreeBSD:*:*|*:GNU/FreeBSD:*:*) + # Determine whether the default compiler uses glibc. + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #if __GLIBC__ >= 2 + LIBC=gnu + #else + LIBC= + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`${LIBC:+-$LIBC} + exit 0 ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit 0 ;; + i*:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit 0 ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit 0 ;; + x86:Interix*:3*) + echo i586-pc-interix3 + exit 0 ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit 0 ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit 0 ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit 0 ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit 0 ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit 0 ;; + *:GNU:*:*) + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit 0 ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit 0 ;; + arm*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit 0 ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + mips:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + ;; + mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips64 + #undef mips64el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mips64el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips64 + #else + CPU= + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + test x"${CPU}" != x && echo "${CPU}-unknown-linux-gnu" && exit 0 + ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit 0 ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit 0 ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit 0 ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit 0 ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit 0 ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit 0 ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit 0 ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit 0 ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + a.out-i386-linux) + echo "${UNAME_MACHINE}-pc-linux-gnuaout" + exit 0 ;; + coff-i386) + echo "${UNAME_MACHINE}-pc-linux-gnucoff" + exit 0 ;; + "") + # Either a pre-BFD a.out linker (linux-gnuoldld) or + # one that does not give us useful --help. + echo "${UNAME_MACHINE}-pc-linux-gnuoldld" + exit 0 ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #ifdef __INTEL_COMPILER + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif +EOF + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 + test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit 0 ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit 0 ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit 0 ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit 0 ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit 0 ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit 0 ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit 0 ;; + i*86:*:5:[78]*) + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit 0 ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit 0 ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i386. + echo i386-pc-msdosdjgpp + exit 0 ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit 0 ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit 0 ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit 0 ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit 0 ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit 0 ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit 0 ;; + M68*:*:R3V[567]*:*) + test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; + 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4.3${OS_REL} && exit 0 + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && echo i586-ncr-sysv4.3${OS_REL} && exit 0 ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && echo i486-ncr-sysv4 && exit 0 ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit 0 ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit 0 ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit 0 ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit 0 ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit 0 ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit 0 ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit 0 ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit 0 ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit 0 ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit 0 ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit 0 ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit 0 ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit 0 ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit 0 ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit 0 ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit 0 ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit 0 ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit 0 ;; + *:Darwin:*:*) + case `uname -p` in + *86) UNAME_PROCESSOR=i686 ;; + powerpc) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit 0 ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit 0 ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit 0 ;; + NSR-[DGKLNPTVW]:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit 0 ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit 0 ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit 0 ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit 0 ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit 0 ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit 0 ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit 0 ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit 0 ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit 0 ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit 0 ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit 0 ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && $dummy && exit 0 + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit 0; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit 0 ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit 0 ;; + c34*) + echo c34-convex-bsd + exit 0 ;; + c38*) + echo c38-convex-bsd + exit 0 ;; + c4*) + echo c4-convex-bsd + exit 0 ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff -ruN gworldclock-1.1-orig/config.h.in gworldclock-1.1/config.h.in --- gworldclock-1.1-orig/config.h.in 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/config.h.in 2003-07-26 14:18:14.000000000 +0900 @@ -1,5 +1,19 @@ /* config.h.in. Generated from configure.ac by autoheader. */ +/* Define to 1 if translation of program messages to the user's native + language is requested. */ +#undef ENABLE_NLS + +/* Define if the GNU dcgettext() function is already present or preinstalled. + */ +#undef HAVE_DCGETTEXT + +/* Define if the GNU gettext() function is already present or preinstalled. */ +#undef HAVE_GETTEXT + +/* Define if you have the iconv() function. */ +#undef HAVE_ICONV + /* Name of package */ #undef PACKAGE diff -ruN gworldclock-1.1-orig/config.rpath gworldclock-1.1/config.rpath --- gworldclock-1.1-orig/config.rpath 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/config.rpath 2003-07-26 12:48:33.000000000 +0900 @@ -0,0 +1,548 @@ +#! /bin/sh +# Output a system dependent set of variables, describing how to set the +# run time search path of shared libraries in an executable. +# +# Copyright 1996-2003 Free Software Foundation, Inc. +# Taken from GNU libtool, 2001 +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. +# +# The first argument passed to this file is the canonical host specification, +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# The environment variables CC, GCC, LDFLAGS, LD, with_gnu_ld +# should be set by the caller. +# +# The set of defined variables is at the end of this script. + +# Known limitations: +# - On IRIX 6.5 with CC="cc", the run time search patch must not be longer +# than 256 bytes, otherwise the compiler driver will dump core. The only +# known workaround is to choose shorter directory names for the build +# directory and/or the installation directory. + +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +shrext=.so + +host="$1" +host_cpu=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo "$host" | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + +# Code taken from libtool.m4's AC_LIBTOOL_PROG_COMPILER_PIC. + +wl= +if test "$GCC" = yes; then + wl='-Wl,' +else + case "$host_os" in + aix*) + wl='-Wl,' + ;; + mingw* | pw32* | os2*) + ;; + hpux9* | hpux10* | hpux11*) + wl='-Wl,' + ;; + irix5* | irix6* | nonstopux*) + wl='-Wl,' + ;; + newsos6) + ;; + linux*) + case $CC in + icc|ecc) + wl='-Wl,' + ;; + ccc) + wl='-Wl,' + ;; + esac + ;; + osf3* | osf4* | osf5*) + wl='-Wl,' + ;; + sco3.2v5*) + ;; + solaris*) + wl='-Wl,' + ;; + sunos4*) + wl='-Qoption ld ' + ;; + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + wl='-Wl,' + ;; + sysv4*MP*) + ;; + uts4*) + ;; + esac +fi + +# Code taken from libtool.m4's AC_LIBTOOL_PROG_LD_SHLIBS. + +hardcode_libdir_flag_spec= +hardcode_libdir_separator= +hardcode_direct=no +hardcode_minus_L=no + +case "$host_os" in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; +esac + +ld_shlibs=yes +if test "$with_gnu_ld" = yes; then + case "$host_os" in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + fi + ;; + amigaos*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can use + # them. + ld_shlibs=no + ;; + beos*) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + cygwin* | mingw* | pw32*) + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + netbsd*) + ;; + solaris* | sysv5*) + if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + sunos4*) + hardcode_direct=yes + ;; + *) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + : + else + ld_shlibs=no + fi + ;; + esac + if test "$ld_shlibs" = yes; then + # Unlike libtool, we use -rpath here, not --rpath, since the documented + # option of GNU ld is called -rpath, not --rpath. + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + fi +else + case "$host_os" in + aix3*) + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + else + aix_use_runtimelinking=no + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + fi + hardcode_direct=yes + hardcode_libdir_separator=':' + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + hardcode_direct=yes + else + # We have old collect2 + hardcode_direct=unsupported + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + esac + fi + # Begin _LT_AC_SYS_LIBPATH_AIX. + echo 'int main () { return 0; }' > conftest.c + ${CC} ${LDFLAGS} conftest.c -o conftest + aix_libpath=`dump -H conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest 2>/dev/null | sed -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } +}'` + fi + if test -z "$aix_libpath"; then + aix_libpath="/usr/lib:/lib" + fi + rm -f conftest.c conftest + # End _LT_AC_SYS_LIBPATH_AIX. + if test "$aix_use_runtimelinking" = yes; then + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + else + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + fi + fi + ;; + amigaos*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + # see comment about different semantics on the GNU ld section + ld_shlibs=no + ;; + bsdi4*) + ;; + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + libext=lib + ;; + darwin* | rhapsody*) + if $CC -v 2>&1 | grep 'Apple' >/dev/null ; then + hardcode_direct=no + fi + ;; + dgux*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + freebsd1*) + ld_shlibs=no + ;; + freebsd2.2*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + freebsd2*) + hardcode_direct=yes + hardcode_minus_L=yes + ;; + freebsd*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + hpux9*) + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + hpux10* | hpux11*) + if test "$with_gnu_ld" = no; then + case "$host_cpu" in + hppa*64*) + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=no + ;; + ia64*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=no + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + *) + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + irix5* | irix6* | nonstopux*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + netbsd*) + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + ;; + newsos6) + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + openbsd*) + hardcode_direct=yes + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + else + case "$host_os" in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + ;; + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + osf3*) + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + osf4* | osf5*) + if test "$GCC" = yes; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + # Both cc and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + hardcode_libdir_separator=: + ;; + sco3.2v5*) + ;; + solaris*) + hardcode_libdir_flag_spec='-R$libdir' + ;; + sunos4*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + ;; + sysv4) + case $host_vendor in + sni) + hardcode_direct=yes # is this really true??? + ;; + siemens) + hardcode_direct=no + ;; + motorola) + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + ;; + sysv4.3*) + ;; + sysv4*MP*) + if test -d /usr/nec; then + ld_shlibs=yes + fi + ;; + sysv4.2uw2*) + hardcode_direct=yes + hardcode_minus_L=no + ;; + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[78]* | unixware7*) + ;; + sysv5*) + hardcode_libdir_flag_spec= + ;; + uts4*) + hardcode_libdir_flag_spec='-L$libdir' + ;; + *) + ld_shlibs=no + ;; + esac +fi + +# Check dynamic linker characteristics +# Code taken from libtool.m4's AC_LIBTOOL_SYS_DYNAMIC_LINKER. +libname_spec='lib$name' +case "$host_os" in + aix3*) + ;; + aix4* | aix5*) + ;; + amigaos*) + ;; + beos*) + ;; + bsdi4*) + ;; + cygwin* | mingw* | pw32*) + shrext=.dll + ;; + darwin* | rhapsody*) + shrext=.dylib + ;; + dgux*) + ;; + freebsd1*) + ;; + freebsd*) + ;; + gnu*) + ;; + hpux9* | hpux10* | hpux11*) + case "$host_cpu" in + ia64*) + shrext=.so + ;; + hppa*64*) + shrext=.sl + ;; + *) + shrext=.sl + ;; + esac + ;; + irix5* | irix6* | nonstopux*) + case "$host_os" in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= ;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 ;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 ;; + *) libsuff= shlibsuff= ;; + esac + ;; + esac + ;; + linux*oldld* | linux*aout* | linux*coff*) + ;; + linux*) + ;; + netbsd*) + ;; + newsos6) + ;; + nto-qnx) + ;; + openbsd*) + ;; + os2*) + libname_spec='$name' + shrext=.dll + ;; + osf3* | osf4* | osf5*) + ;; + sco3.2v5*) + ;; + solaris*) + ;; + sunos4*) + ;; + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + ;; + sysv4*MP*) + ;; + uts4*) + ;; +esac + +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' +escaped_wl=`echo "X$wl" | sed -e 's/^X//' -e "$sed_quote_subst"` +shlibext=`echo "$shrext" | sed -e 's,^\.,,'` +escaped_hardcode_libdir_flag_spec=`echo "X$hardcode_libdir_flag_spec" | sed -e 's/^X//' -e "$sed_quote_subst"` + +sed -e 's/^\([a-zA-Z0-9_]*\)=/acl_cv_\1=/' <. Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 +Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit 0 ;; + --version | -v ) + echo "$version" ; exit 0 ;; + --help | --h* | -h ) + echo "$usage"; exit 0 ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit 0;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | freebsd*-gnu* | netbsd*-gnu* | storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis) + os= + basic_machine=$1 + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k \ + | m32r | m68000 | m68k | m88k | mcore \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64vr | mips64vrel \ + | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | msp430 \ + | ns16k | ns32k \ + | openrisc | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | sh | sh[1234] | sh[23]e | sh[34]eb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ + | strongarm \ + | tahoe | thumb | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xscale | xstormy16 | xtensa \ + | z8k) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* \ + | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* \ + | m32r-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | mcore-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | msp430-* \ + | none-* | np1-* | nv1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[1234]-* | sh[23]e-* | sh[34]eb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ + | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ + | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ + | xtensa-* \ + | ymp-* \ + | z8k-*) + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + crds | unos) + basic_machine=m68k-crds + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + mmix*) + basic_machine=mmix-knuth + os=-mmixware + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nv1) + basic_machine=nv1-cray + os=-unicosmp + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + or32 | or32-*) + basic_machine=or32-unknown + os=-coff + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2) + basic_machine=i686-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic4x | c4x*) + basic_machine=tic4x-unknown + os=-coff + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh3 | sh4 | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparc | sparcv9 | sparcv9b) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -netbsd* | -openbsd* | -freebsd* | -riscix* \ + | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-ibm) + os=-aix + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit 0 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff -ruN gworldclock-1.1-orig/configure gworldclock-1.1/configure --- gworldclock-1.1-orig/configure 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/configure 2003-07-26 14:17:29.000000000 +0900 @@ -270,7 +270,7 @@ PACKAGE_STRING='gworldclock 1.1' PACKAGE_BUGREPORT='' -ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE PKG_CONFIG GTK2_CFLAGS GTK2_LIBS LIBOBJS LTLIBOBJS' +ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CYGPATH_W PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO AMTAR install_sh STRIP ac_ct_STRIP INSTALL_STRIP_PROGRAM AWK SET_MAKE am__leading_dot CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT DEPDIR am__include am__quote AMDEP_TRUE AMDEP_FALSE AMDEPBACKSLASH CCDEPMODE am__fastdepCC_TRUE am__fastdepCC_FALSE PKG_CONFIG GTK2_CFLAGS GTK2_LIBS MKINSTALLDIRS USE_NLS MSGFMT GMSGFMT XGETTEXT MSGMERGE build build_cpu build_vendor build_os host host_cpu host_vendor host_os LIBICONV LTLIBICONV INTLLIBS LIBINTL LTLIBINTL POSUB localedir LIBOBJS LTLIBOBJS' ac_subst_files='' # Initialize some variables set by options. @@ -792,6 +792,10 @@ --program-prefix=PREFIX prepend PREFIX to installed program names --program-suffix=SUFFIX append SUFFIX to installed program names --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] _ACEOF fi @@ -806,6 +810,17 @@ --enable-FEATURE[=ARG] include FEATURE [ARG=yes] --disable-dependency-tracking Speeds up one-time builds --enable-dependency-tracking Do not reject slow dependency extractors + --disable-nls do not use Native Language Support + --disable-rpath do not hardcode runtime library paths + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-gnu-ld assume the C compiler uses GNU ld default=no + --with-libiconv-prefix[=DIR] search for libiconv in DIR/include and DIR/lib + --without-libiconv-prefix don't search for libiconv in includedir and libdir + --with-libintl-prefix[=DIR] search for libintl in DIR/include and DIR/lib + --without-libintl-prefix don't search for libintl in includedir and libdir Some influential environment variables: CC C compiler command @@ -1231,7 +1246,7 @@ -am__api_version="1.6" +am__api_version="1.7" ac_aux_dir= for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do if test -f $ac_dir/install-sh; then @@ -1475,6 +1490,15 @@ SET_MAKE="MAKE=${MAKE-make}" fi +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + # test to see if srcdir already configured if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then @@ -1483,9 +1507,19 @@ { (exit 1); exit 1; }; } fi +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + # Define the identity of the package. - PACKAGE=gworldclock - VERSION=1.1 + PACKAGE='gworldclock' + VERSION='1.1' cat >>confdefs.h <<_ACEOF @@ -1619,13 +1653,10 @@ -# Add the stamp file to the list of files AC keeps track of, -# along with our hook. ac_config_headers="$ac_config_headers config.h" - ac_ext=c ac_cpp='$CPP $CPPFLAGS' ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' @@ -2394,8 +2425,7 @@ echo "$as_me:$LINENO: \$? = $ac_status" >&5 (exit $ac_status); }; }; then for ac_declaration in \ - ''\ - '#include ' \ + '' \ 'extern "C" void std::exit (int) throw (); using std::exit;' \ 'extern "C" void std::exit (int); using std::exit;' \ 'extern "C" void exit (int) throw ();' \ @@ -2409,8 +2439,8 @@ cat confdefs.h >>conftest.$ac_ext cat >>conftest.$ac_ext <<_ACEOF /* end confdefs.h. */ -#include $ac_declaration +#include int main () { @@ -2493,24 +2523,16 @@ ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ac_compiler_gnu=$ac_cv_c_compiler_gnu -rm -f .deps 2>/dev/null -mkdir .deps 2>/dev/null -if test -d .deps; then - DEPDIR=.deps -else - # MS-DOS does not allow filenames that begin with a dot. - DEPDIR=_deps -fi -rmdir .deps 2>/dev/null - +DEPDIR="${am__leading_dot}deps" ac_config_commands="$ac_config_commands depfiles" am_make=${MAKE-make} cat > confinc << 'END' -doit: +am__doit: @echo done +.PHONY: am__doit END # If we don't find an include directive, just comment out the code. echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 @@ -2525,7 +2547,7 @@ # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. -if test "`$am_make -s -f confmf 2> /dev/null | fgrep -v 'ing directory'`" = "done"; then +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU @@ -2616,11 +2638,17 @@ if depmode=$depmode \ source=conftest.c object=conftest.o \ depfile=conftest.Po tmpdepfile=conftest.TPo \ - $SHELL ./depcomp $depcc -c conftest.c -o conftest.o >/dev/null 2>&1 && + $SHELL ./depcomp $depcc -c -o conftest.o conftest.c \ + >/dev/null 2>conftest.err && grep conftest.h conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then - am_cv_CC_dependencies_compiler_type=$depmode - break + # icc doesn't choke on unknown options, it will just issue warnings + # (even with -Werror). So we grep stderr for any message + # that says an option was ignored. + if grep 'ignoring option' conftest.err >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi fi done @@ -2637,6 +2665,18 @@ +if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + + succeeded=no @@ -2738,205 +2778,149 @@ +ALL_LINGUAS=ja - - - ac_config_files="$ac_config_files Makefile" -cat >confcache <<\_ACEOF -# This file is a shell script that caches the results of configure -# tests run on this system so they can be shared between configure -# scripts and configure runs, see configure's option --config-cache. -# It is not useful on other systems. If it contains results you don't -# want to keep, you may remove or edit it. -# -# config.status only pays attention to the cache file if you give it -# the --recheck option to rerun configure. -# -# `ac_cv_env_foo' variables (set or unset) will be overridden when -# loading this file, other *unset* `ac_cv_foo' will be assigned the -# following values. - -_ACEOF - -# The following way of writing the cache mishandles newlines in values, -# but we know of no workaround that is simple, portable, and efficient. -# So, don't put newlines in cache variables' values. -# Ultrix sh set writes to stderr and can't be redirected directly, -# and sets the high bit in the cache file unless we assign to the vars. -{ - (set) 2>&1 | - case `(ac_space=' '; set | grep ac_space) 2>&1` in - *ac_space=\ *) - # `set' does not quote correctly, so add quotes (double-quote - # substitution turns \\\\ into \\, and sed turns \\ into \). - sed -n \ - "s/'/'\\\\''/g; - s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" - ;; - *) - # `set' quotes correctly as required by POSIX, so do not add quotes. - sed -n \ - "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" - ;; - esac; -} | - sed ' - t clear - : clear - s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ - t end - /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ - : end' >>confcache -if diff $cache_file confcache >/dev/null 2>&1; then :; else - if test -w $cache_file; then - test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" - cat confcache >$cache_file - else - echo "not updating unwritable cache $cache_file" + MKINSTALLDIRS= + if test -n "$ac_aux_dir"; then + case "$ac_aux_dir" in + /*) MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ;; + *) MKINSTALLDIRS="\$(top_builddir)/$ac_aux_dir/mkinstalldirs" ;; + esac + fi + if test -z "$MKINSTALLDIRS"; then + MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" fi -fi -rm -f confcache - -test "x$prefix" = xNONE && prefix=$ac_default_prefix -# Let make expand exec_prefix. -test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' - -# VPATH may cause trouble with some makes, so we remove $(srcdir), -# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and -# trailing colons and then remove the whole line if VPATH becomes empty -# (actually we leave an empty line to preserve line numbers). -if test "x$srcdir" = x.; then - ac_vpsub='/^[ ]*VPATH[ ]*=/{ -s/:*\$(srcdir):*/:/; -s/:*\${srcdir}:*/:/; -s/:*@srcdir@:*/:/; -s/^\([^=]*=[ ]*\):*/\1/; -s/:*$//; -s/^[^=]*=[ ]*$//; -}' -fi -DEFS=-DHAVE_CONFIG_H -ac_libobjs= -ac_ltlibobjs= -for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue - # 1. Remove the extension, and $U if already installed. - ac_i=`echo "$ac_i" | - sed 's/\$U\././;s/\.o$//;s/\.obj$//'` - # 2. Add them. - ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" - ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' -done -LIBOBJS=$ac_libobjs -LTLIBOBJS=$ac_ltlibobjs + echo "$as_me:$LINENO: checking whether NLS is requested" >&5 +echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6 + # Check whether --enable-nls or --disable-nls was given. +if test "${enable_nls+set}" = set; then + enableval="$enable_nls" + USE_NLS=$enableval +else + USE_NLS=yes +fi; + echo "$as_me:$LINENO: result: $USE_NLS" >&5 +echo "${ECHO_T}$USE_NLS" >&6 -if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then - { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&5 -echo "$as_me: error: conditional \"AMDEP\" was never defined. -Usually this means the macro was only invoked conditionally." >&2;} - { (exit 1); exit 1; }; } -fi -: ${CONFIG_STATUS=./config.status} -ac_clean_files_save=$ac_clean_files -ac_clean_files="$ac_clean_files $CONFIG_STATUS" -{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 -echo "$as_me: creating $CONFIG_STATUS" >&6;} -cat >$CONFIG_STATUS <<_ACEOF -#! $SHELL -# Generated by $as_me. -# Run this file to recreate the current configuration. -# Compiler output produced by configure, useful for debugging -# configure, is in config.log if it exists. -debug=false -ac_cs_recheck=false -ac_cs_silent=false -SHELL=\${CONFIG_SHELL-$SHELL} -_ACEOF -cat >>$CONFIG_STATUS <<\_ACEOF -## --------------------- ## -## M4sh Initialization. ## -## --------------------- ## -# Be Bourne compatible -if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh - NULLCMD=: - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then - set -o posix +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh fi -# Support unset when possible. -if (FOO=FOO; unset FOO) >/dev/null 2>&1; then - as_unset=unset +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" else - as_unset=false + ac_executable_p="test -f" fi +rm -f conf$$.file +# Extract the first word of "msgfmt", so it can be a program name with args. +set dummy msgfmt; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_MSGFMT+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case "$MSGFMT" in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + if $ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 && + (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + ac_cv_path_MSGFMT="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT=":" + ;; +esac +fi +MSGFMT="$ac_cv_path_MSGFMT" +if test "$MSGFMT" != ":"; then + echo "$as_me:$LINENO: result: $MSGFMT" >&5 +echo "${ECHO_T}$MSGFMT" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi -# Work around bugs in pre-3.0 UWIN ksh. -$as_unset ENV MAIL MAILPATH -PS1='$ ' -PS2='> ' -PS4='+ ' - -# NLS nuisances. -for as_var in \ - LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ - LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ - LC_TELEPHONE LC_TIME + # Extract the first word of "gmsgfmt", so it can be a program name with args. +set dummy gmsgfmt; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_GMSGFMT+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case $GMSGFMT in + [\\/]* | ?:[\\/]*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + *) + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH do - if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then - eval $as_var=C; export $as_var - else - $as_unset $as_var + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then + ac_cv_path_GMSGFMT="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 fi done +done -# Required to use basename. -if expr a : '\(a\)' >/dev/null 2>&1; then - as_expr=expr -else - as_expr=false + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; +esac fi +GMSGFMT=$ac_cv_path_GMSGFMT -if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then - as_basename=basename +if test -n "$GMSGFMT"; then + echo "$as_me:$LINENO: result: $GMSGFMT" >&5 +echo "${ECHO_T}$GMSGFMT" >&6 else - as_basename=false + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 fi -# Name of the executable. -as_me=`$as_basename "$0" || -$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ - X"$0" : 'X\(//\)$' \| \ - X"$0" : 'X\(/\)$' \| \ - . : '\(.\)' 2>/dev/null || -echo X/"$0" | - sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } - /^X\/\(\/\/\)$/{ s//\1/; q; } - /^X\/\(\/\).*/{ s//\1/; q; } - s/.*/./; q'` - - -# PATH needs CR, and LINENO needs CR and PATH. -# Avoid depending upon Character Ranges. -as_cr_letters='abcdefghijklmnopqrstuvwxyz' -as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' -as_cr_Letters=$as_cr_letters$as_cr_LETTERS -as_cr_digits='0123456789' -as_cr_alnum=$as_cr_Letters$as_cr_digits +# Prepare PATH_SEPARATOR. # The user is always right. if test "${PATH_SEPARATOR+set}" != set; then echo "#! /bin/sh" >conf$$.sh @@ -2950,15 +2934,1812 @@ rm -f conf$$.sh fi +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file - as_lineno_1=$LINENO - as_lineno_2=$LINENO - as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` - test "x$as_lineno_1" != "x$as_lineno_2" && - test "x$as_lineno_3" = "x$as_lineno_2" || { - # Find who we are. Look in the path if we contain no path at all - # relative or not. - case $0 in +# Extract the first word of "xgettext", so it can be a program name with args. +set dummy xgettext; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_XGETTEXT+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case "$XGETTEXT" in + [\\/]* | ?:[\\/]*) + ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && + (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + ac_cv_path_XGETTEXT="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" + ;; +esac +fi +XGETTEXT="$ac_cv_path_XGETTEXT" +if test "$XGETTEXT" != ":"; then + echo "$as_me:$LINENO: result: $XGETTEXT" >&5 +echo "${ECHO_T}$XGETTEXT" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + rm -f messages.po + + +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "msgmerge", so it can be a program name with args. +set dummy msgmerge; ac_word=$2 +echo "$as_me:$LINENO: checking for $ac_word" >&5 +echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +if test "${ac_cv_path_MSGMERGE+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + case "$MSGMERGE" in + [\\/]* | ?:[\\/]*) + ac_cv_path_MSGMERGE="$MSGMERGE" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + if $ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1; then + ac_cv_path_MSGMERGE="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" + test -z "$ac_cv_path_MSGMERGE" && ac_cv_path_MSGMERGE=":" + ;; +esac +fi +MSGMERGE="$ac_cv_path_MSGMERGE" +if test "$MSGMERGE" != ":"; then + echo "$as_me:$LINENO: result: $MSGMERGE" >&5 +echo "${ECHO_T}$MSGMERGE" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi + + + if test "$GMSGFMT" != ":"; then + if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 && + (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + : ; + else + GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'` + echo "$as_me:$LINENO: result: found $GMSGFMT program is not GNU msgfmt; ignore it" >&5 +echo "${ECHO_T}found $GMSGFMT program is not GNU msgfmt; ignore it" >&6 + GMSGFMT=":" + fi + fi + + if test "$XGETTEXT" != ":"; then + if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && + (if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + : ; + else + echo "$as_me:$LINENO: result: found xgettext program is not GNU xgettext; ignore it" >&5 +echo "${ECHO_T}found xgettext program is not GNU xgettext; ignore it" >&6 + XGETTEXT=":" + fi + rm -f messages.po + fi + + ac_config_commands="$ac_config_commands default-1" + + + + if test "X$prefix" = "XNONE"; then + acl_final_prefix="$ac_default_prefix" + else + acl_final_prefix="$prefix" + fi + if test "X$exec_prefix" = "XNONE"; then + acl_final_exec_prefix='${prefix}' + else + acl_final_exec_prefix="$exec_prefix" + fi + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" + prefix="$acl_save_prefix" + +# Make sure we can run config.sub. +$ac_config_sub sun4 >/dev/null 2>&1 || + { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +echo "$as_me: error: cannot run $ac_config_sub" >&2;} + { (exit 1); exit 1; }; } + +echo "$as_me:$LINENO: checking build system type" >&5 +echo $ECHO_N "checking build system type... $ECHO_C" >&6 +if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_build_alias=$build_alias +test -z "$ac_cv_build_alias" && + ac_cv_build_alias=`$ac_config_guess` +test -z "$ac_cv_build_alias" && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +echo "${ECHO_T}$ac_cv_build" >&6 +build=$ac_cv_build +build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + +echo "$as_me:$LINENO: checking host system type" >&5 +echo $ECHO_N "checking host system type... $ECHO_C" >&6 +if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + ac_cv_host_alias=$host_alias +test -z "$ac_cv_host_alias" && + ac_cv_host_alias=$ac_cv_build_alias +ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || + { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +echo "${ECHO_T}$ac_cv_host" >&6 +host=$ac_cv_host +host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` + + + +# Check whether --with-gnu-ld or --without-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then + withval="$with_gnu_ld" + test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi; +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + echo "$as_me:$LINENO: checking for ld used by GCC" >&5 +echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6 + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | [A-Za-z]:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + echo "$as_me:$LINENO: checking for GNU ld" >&5 +echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 +else + echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 +fi +if test "${acl_cv_path_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + acl_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + test "$with_gnu_ld" != no && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$ac_save_ifs" +else + acl_cv_path_LD="$LD" # Let the user override the test with a path. +fi +fi + +LD="$acl_cv_path_LD" +if test -n "$LD"; then + echo "$as_me:$LINENO: result: $LD" >&5 +echo "${ECHO_T}$LD" >&6 +else + echo "$as_me:$LINENO: result: no" >&5 +echo "${ECHO_T}no" >&6 +fi +test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 +if test "${acl_cv_prog_gnu_ld+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + # I'd rather use --version here, but apparently some GNU ld's only accept -v. +if $LD -v 2>&1 &5; then + acl_cv_prog_gnu_ld=yes +else + acl_cv_prog_gnu_ld=no +fi +fi +echo "$as_me:$LINENO: result: $acl_cv_prog_gnu_ld" >&5 +echo "${ECHO_T}$acl_cv_prog_gnu_ld" >&6 +with_gnu_ld=$acl_cv_prog_gnu_ld + + + + echo "$as_me:$LINENO: checking for shared library run path origin" >&5 +echo $ECHO_N "checking for shared library run path origin... $ECHO_C" >&6 +if test "${acl_cv_rpath+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ + ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh + . ./conftest.sh + rm -f ./conftest.sh + acl_cv_rpath=done + +fi +echo "$as_me:$LINENO: result: $acl_cv_rpath" >&5 +echo "${ECHO_T}$acl_cv_rpath" >&6 + wl="$acl_cv_wl" + libext="$acl_cv_libext" + shlibext="$acl_cv_shlibext" + hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" + hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" + hardcode_direct="$acl_cv_hardcode_direct" + hardcode_minus_L="$acl_cv_hardcode_minus_L" + # Check whether --enable-rpath or --disable-rpath was given. +if test "${enable_rpath+set}" = set; then + enableval="$enable_rpath" + : +else + enable_rpath=yes +fi; + + + + + + + + use_additional=yes + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + +# Check whether --with-libiconv-prefix or --without-libiconv-prefix was given. +if test "${with_libiconv_prefix+set}" = set; then + withval="$with_libiconv_prefix" + + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + else + additional_includedir="$withval/include" + additional_libdir="$withval/lib" + fi + fi + +fi; + LIBICONV= + LTLIBICONV= + INCICONV= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='iconv ' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIBICONV="${LIBICONV}${LIBICONV:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$value" + else + : + fi + else + found_dir= + found_la= + found_so= + found_a= + if test $use_additional = yes; then + if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then + found_dir="$additional_libdir" + found_so="$additional_libdir/lib$name.$shlibext" + if test -f "$additional_libdir/lib$name.la"; then + found_la="$additional_libdir/lib$name.la" + fi + else + if test -f "$additional_libdir/lib$name.$libext"; then + found_dir="$additional_libdir" + found_a="$additional_libdir/lib$name.$libext" + if test -f "$additional_libdir/lib$name.la"; then + found_la="$additional_libdir/lib$name.la" + fi + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then + found_dir="$dir" + found_so="$dir/lib$name.$shlibext" + if test -f "$dir/lib$name.la"; then + found_la="$dir/lib$name.la" + fi + else + if test -f "$dir/lib$name.$libext"; then + found_dir="$dir" + found_a="$dir/lib$name.$libext" + if test -f "$dir/lib$name.la"; then + found_la="$dir/lib$name.la" + fi + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + if test "$hardcode_direct" = yes; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + haveit= + for x in $LDFLAGS $LIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir" + fi + if test "$hardcode_minus_L" != no; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_so" + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }$found_a" + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$found_dir -l$name" + fi + fi + additional_includedir= + case "$found_dir" in + */lib | */lib/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INCICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + INCICONV="${INCICONV}${INCICONV:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + if test -n "$found_la"; then + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + if test "X$additional_libdir" != "X/usr/lib"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/lib"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LIBICONV="${LIBICONV}${LIBICONV:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIBICONV; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + LIBICONV="${LIBICONV}${LIBICONV:+ }$dep" + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }$dep" + ;; + esac + done + fi + else + LIBICONV="${LIBICONV}${LIBICONV:+ }-l$name" + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$hardcode_libdir_separator"; then + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" + done + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" + else + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBICONV="${LIBICONV}${LIBICONV:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + for found_dir in $ltrpathdirs; do + LTLIBICONV="${LTLIBICONV}${LTLIBICONV:+ }-R$found_dir" + done + fi + + + + + + + + + + + + + + + + + + + + echo "$as_me:$LINENO: checking whether NLS is requested" >&5 +echo $ECHO_N "checking whether NLS is requested... $ECHO_C" >&6 + # Check whether --enable-nls or --disable-nls was given. +if test "${enable_nls+set}" = set; then + enableval="$enable_nls" + USE_NLS=$enableval +else + USE_NLS=yes +fi; + echo "$as_me:$LINENO: result: $USE_NLS" >&5 +echo "${ECHO_T}$USE_NLS" >&6 + + + + + LIBINTL= + LTLIBINTL= + POSUB= + + if test "$USE_NLS" = "yes"; then + gt_use_preinstalled_gnugettext=no + + + + + + + echo "$as_me:$LINENO: checking for GNU gettext in libc" >&5 +echo $ECHO_N "checking for GNU gettext in libc... $ECHO_C" >&6 +if test "${gt_cv_func_gnugettext1_libc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +extern int _nl_msg_cat_cntr; +extern int *_nl_domain_bindings; +int +main () +{ +bindtextdomain ("", ""); +return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_domain_bindings + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + gt_cv_func_gnugettext1_libc=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +gt_cv_func_gnugettext1_libc=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext +fi +echo "$as_me:$LINENO: result: $gt_cv_func_gnugettext1_libc" >&5 +echo "${ECHO_T}$gt_cv_func_gnugettext1_libc" >&6 + + if test "$gt_cv_func_gnugettext1_libc" != "yes"; then + + + + + + am_save_CPPFLAGS="$CPPFLAGS" + + for element in $INCICONV; do + haveit= + for x in $CPPFLAGS; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" + fi + done + + + echo "$as_me:$LINENO: checking for iconv" >&5 +echo $ECHO_N "checking for iconv... $ECHO_C" >&6 +if test "${am_cv_func_iconv+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + + am_cv_func_iconv="no, consider installing GNU libiconv" + am_cv_lib_iconv=no + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +int +main () +{ +iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + am_cv_func_iconv=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext + if test "$am_cv_func_iconv" != yes; then + am_save_LIBS="$LIBS" + LIBS="$LIBS $LIBICONV" + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +#include +int +main () +{ +iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + am_cv_lib_iconv=yes + am_cv_func_iconv=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext + LIBS="$am_save_LIBS" + fi + +fi +echo "$as_me:$LINENO: result: $am_cv_func_iconv" >&5 +echo "${ECHO_T}$am_cv_func_iconv" >&6 + if test "$am_cv_func_iconv" = yes; then + +cat >>confdefs.h <<\_ACEOF +#define HAVE_ICONV 1 +_ACEOF + + fi + if test "$am_cv_lib_iconv" = yes; then + echo "$as_me:$LINENO: checking how to link with libiconv" >&5 +echo $ECHO_N "checking how to link with libiconv... $ECHO_C" >&6 + echo "$as_me:$LINENO: result: $LIBICONV" >&5 +echo "${ECHO_T}$LIBICONV" >&6 + else + CPPFLAGS="$am_save_CPPFLAGS" + LIBICONV= + LTLIBICONV= + fi + + + + + + + use_additional=yes + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + +# Check whether --with-libintl-prefix or --without-libintl-prefix was given. +if test "${with_libintl_prefix+set}" = set; then + withval="$with_libintl_prefix" + + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + else + additional_includedir="$withval/include" + additional_libdir="$withval/lib" + fi + fi + +fi; + LIBINTL= + LTLIBINTL= + INCINTL= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='intl ' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIBINTL="${LIBINTL}${LIBINTL:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$value" + else + : + fi + else + found_dir= + found_la= + found_so= + found_a= + if test $use_additional = yes; then + if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then + found_dir="$additional_libdir" + found_so="$additional_libdir/lib$name.$shlibext" + if test -f "$additional_libdir/lib$name.la"; then + found_la="$additional_libdir/lib$name.la" + fi + else + if test -f "$additional_libdir/lib$name.$libext"; then + found_dir="$additional_libdir" + found_a="$additional_libdir/lib$name.$libext" + if test -f "$additional_libdir/lib$name.la"; then + found_la="$additional_libdir/lib$name.la" + fi + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then + found_dir="$dir" + found_so="$dir/lib$name.$shlibext" + if test -f "$dir/lib$name.la"; then + found_la="$dir/lib$name.la" + fi + else + if test -f "$dir/lib$name.$libext"; then + found_dir="$dir" + found_a="$dir/lib$name.$libext" + if test -f "$dir/lib$name.la"; then + found_la="$dir/lib$name.la" + fi + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + if test "$hardcode_direct" = yes; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + haveit= + for x in $LDFLAGS $LIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir" + fi + if test "$hardcode_minus_L" != no; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_so" + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }$found_a" + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$found_dir -l$name" + fi + fi + additional_includedir= + case "$found_dir" in + */lib | */lib/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INCINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + INCINTL="${INCINTL}${INCINTL:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + if test -n "$found_la"; then + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + if test "X$additional_libdir" != "X/usr/lib"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/lib"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LIBINTL="${LIBINTL}${LIBINTL:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIBINTL; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + LIBINTL="${LIBINTL}${LIBINTL:+ }$dep" + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }$dep" + ;; + esac + done + fi + else + LIBINTL="${LIBINTL}${LIBINTL:+ }-l$name" + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$hardcode_libdir_separator"; then + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" + done + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" + else + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIBINTL="${LIBINTL}${LIBINTL:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + for found_dir in $ltrpathdirs; do + LTLIBINTL="${LTLIBINTL}${LTLIBINTL:+ }-R$found_dir" + done + fi + + echo "$as_me:$LINENO: checking for GNU gettext in libintl" >&5 +echo $ECHO_N "checking for GNU gettext in libintl... $ECHO_C" >&6 +if test "${gt_cv_func_gnugettext1_libintl+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +else + gt_save_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $INCINTL" + gt_save_LIBS="$LIBS" + LIBS="$LIBS $LIBINTL" + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias (); +int +main () +{ +bindtextdomain ("", ""); +return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_expand_alias (0) + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + gt_cv_func_gnugettext1_libintl=yes +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +gt_cv_func_gnugettext1_libintl=no +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext + if test "$gt_cv_func_gnugettext1_libintl" != yes && test -n "$LIBICONV"; then + LIBS="$LIBS $LIBICONV" + cat >conftest.$ac_ext <<_ACEOF +#line $LINENO "configure" +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include +extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias (); +int +main () +{ +bindtextdomain ("", ""); +return (int) gettext ("") + _nl_msg_cat_cntr + *_nl_expand_alias (0) + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && + { ac_try='test -s conftest$ac_exeext' + { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 + (eval $ac_try) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + LIBINTL="$LIBINTL $LIBICONV" + LTLIBINTL="$LTLIBINTL $LTLIBICONV" + gt_cv_func_gnugettext1_libintl=yes + +else + echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +fi +rm -f conftest.$ac_objext conftest$ac_exeext conftest.$ac_ext + fi + CPPFLAGS="$gt_save_CPPFLAGS" + LIBS="$gt_save_LIBS" +fi +echo "$as_me:$LINENO: result: $gt_cv_func_gnugettext1_libintl" >&5 +echo "${ECHO_T}$gt_cv_func_gnugettext1_libintl" >&6 + fi + + if test "$gt_cv_func_gnugettext1_libc" = "yes" \ + || { test "$gt_cv_func_gnugettext1_libintl" = "yes" \ + && test "$PACKAGE" != gettext-runtime \ + && test "$PACKAGE" != gettext-tools; }; then + gt_use_preinstalled_gnugettext=yes + else + LIBINTL= + LTLIBINTL= + INCINTL= + fi + + + + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + +cat >>confdefs.h <<\_ACEOF +#define ENABLE_NLS 1 +_ACEOF + + else + USE_NLS=no + fi + fi + + echo "$as_me:$LINENO: checking whether to use NLS" >&5 +echo $ECHO_N "checking whether to use NLS... $ECHO_C" >&6 + echo "$as_me:$LINENO: result: $USE_NLS" >&5 +echo "${ECHO_T}$USE_NLS" >&6 + if test "$USE_NLS" = "yes"; then + echo "$as_me:$LINENO: checking where the gettext function comes from" >&5 +echo $ECHO_N "checking where the gettext function comes from... $ECHO_C" >&6 + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if test "$gt_cv_func_gnugettext1_libintl" = "yes"; then + gt_source="external libintl" + else + gt_source="libc" + fi + else + gt_source="included intl directory" + fi + echo "$as_me:$LINENO: result: $gt_source" >&5 +echo "${ECHO_T}$gt_source" >&6 + fi + + if test "$USE_NLS" = "yes"; then + + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if test "$gt_cv_func_gnugettext1_libintl" = "yes"; then + echo "$as_me:$LINENO: checking how to link with libintl" >&5 +echo $ECHO_N "checking how to link with libintl... $ECHO_C" >&6 + echo "$as_me:$LINENO: result: $LIBINTL" >&5 +echo "${ECHO_T}$LIBINTL" >&6 + + for element in $INCINTL; do + haveit= + for x in $CPPFLAGS; do + + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + eval x=\"$x\" + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" + + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }$element" + fi + done + + fi + + +cat >>confdefs.h <<\_ACEOF +#define HAVE_GETTEXT 1 +_ACEOF + + +cat >>confdefs.h <<\_ACEOF +#define HAVE_DCGETTEXT 1 +_ACEOF + + fi + + POSUB=po + fi + + + + INTLLIBS="$LIBINTL" + + + + + + + +localedir='${datadir}/locale' + + + + + + ac_config_files="$ac_config_files Makefile po/Makefile.in m4/Makefile" +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +{ + (set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n \ + "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" + ;; + esac; +} | + sed ' + t clear + : clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + : end' >>confcache +if diff $cache_file confcache >/dev/null 2>&1; then :; else + if test -w $cache_file; then + test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" + cat confcache >$cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/; +s/:*\${srcdir}:*/:/; +s/:*@srcdir@:*/:/; +s/^\([^=]*=[ ]*\):*/\1/; +s/:*$//; +s/^[^=]*=[ ]*$//; +}' +fi + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_i=`echo "$ac_i" | + sed 's/\$U\././;s/\.o$//;s/\.obj$//'` + # 2. Add them. + ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi + +: ${CONFIG_STATUS=./config.status} +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be Bourne compatible +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then + set -o posix +fi + +# Support unset when possible. +if (FOO=FOO; unset FOO) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# Work around bugs in pre-3.0 UWIN ksh. +$as_unset ENV MAIL MAILPATH +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +for as_var in \ + LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ + LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ + LC_TELEPHONE LC_TIME +do + if (set +x; test -n "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else + $as_unset $as_var + fi +done + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1; then + as_expr=expr +else + as_expr=false +fi + +if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)$' \| \ + . : '\(.\)' 2>/dev/null || +echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } + /^X\/\(\/\/\)$/{ s//\1/; q; } + /^X\/\(\/\).*/{ s//\1/; q; } + s/.*/./; q'` + + +# PATH needs CR, and LINENO needs CR and PATH. +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x$as_lineno_3" = "x$as_lineno_2" || { + # Find who we are. Look in the path if we contain no path at all + # relative or not. + case $0 in *[\\/]* ) as_myself=$0 ;; *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH @@ -3273,6 +5054,13 @@ # AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" +# Capture the value of obsolete ALL_LINGUAS because we need it to compute + # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it + # from automake. + eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' + # Capture the value of LINGUAS because we need it to compute CATALOGS. + LINGUAS="${LINGUAS-%UNSET%}" + _ACEOF @@ -3284,7 +5072,10 @@ case "$ac_config_target" in # Handling of arguments. "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; + "po/Makefile.in" ) CONFIG_FILES="$CONFIG_FILES po/Makefile.in" ;; + "m4/Makefile" ) CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;; "depfiles" ) CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 echo "$as_me: error: invalid argument: $ac_config_target" >&2;} @@ -3374,6 +5165,7 @@ s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t s,@INSTALL_DATA@,$INSTALL_DATA,;t t +s,@CYGPATH_W@,$CYGPATH_W,;t t s,@PACKAGE@,$PACKAGE,;t t s,@VERSION@,$VERSION,;t t s,@ACLOCAL@,$ACLOCAL,;t t @@ -3388,6 +5180,7 @@ s,@INSTALL_STRIP_PROGRAM@,$INSTALL_STRIP_PROGRAM,;t t s,@AWK@,$AWK,;t t s,@SET_MAKE@,$SET_MAKE,;t t +s,@am__leading_dot@,$am__leading_dot,;t t s,@CC@,$CC,;t t s,@CFLAGS@,$CFLAGS,;t t s,@LDFLAGS@,$LDFLAGS,;t t @@ -3402,9 +5195,32 @@ s,@AMDEP_FALSE@,$AMDEP_FALSE,;t t s,@AMDEPBACKSLASH@,$AMDEPBACKSLASH,;t t s,@CCDEPMODE@,$CCDEPMODE,;t t +s,@am__fastdepCC_TRUE@,$am__fastdepCC_TRUE,;t t +s,@am__fastdepCC_FALSE@,$am__fastdepCC_FALSE,;t t s,@PKG_CONFIG@,$PKG_CONFIG,;t t s,@GTK2_CFLAGS@,$GTK2_CFLAGS,;t t s,@GTK2_LIBS@,$GTK2_LIBS,;t t +s,@MKINSTALLDIRS@,$MKINSTALLDIRS,;t t +s,@USE_NLS@,$USE_NLS,;t t +s,@MSGFMT@,$MSGFMT,;t t +s,@GMSGFMT@,$GMSGFMT,;t t +s,@XGETTEXT@,$XGETTEXT,;t t +s,@MSGMERGE@,$MSGMERGE,;t t +s,@build@,$build,;t t +s,@build_cpu@,$build_cpu,;t t +s,@build_vendor@,$build_vendor,;t t +s,@build_os@,$build_os,;t t +s,@host@,$host,;t t +s,@host_cpu@,$host_cpu,;t t +s,@host_vendor@,$host_vendor,;t t +s,@host_os@,$host_os,;t t +s,@LIBICONV@,$LIBICONV,;t t +s,@LTLIBICONV@,$LTLIBICONV,;t t +s,@INTLLIBS@,$INTLLIBS,;t t +s,@LIBINTL@,$LIBINTL,;t t +s,@LTLIBINTL@,$LTLIBINTL,;t t +s,@POSUB@,$POSUB,;t t +s,@localedir@,$localedir,;t t s,@LIBOBJS@,$LIBOBJS,;t t s,@LTLIBOBJS@,$LTLIBOBJS,;t t CEOF @@ -3832,13 +5648,29 @@ cat $tmp/config.h rm -f $tmp/config.h fi - # Run the commands associated with the file. - case $ac_file in - config.h ) # update the timestamp -echo 'timestamp for config.h' >"./stamp-h1" - ;; +# Compute $ac_file's index in $config_headers. +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $ac_file | $ac_file:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done +echo "timestamp for $ac_file" >`(dirname $ac_file) 2>/dev/null || +$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X$ac_file : 'X\(//\)[^/]' \| \ + X$ac_file : 'X\(//\)$' \| \ + X$ac_file : 'X\(/\)' \| \ + . : '\(.\)' 2>/dev/null || +echo X$ac_file | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } + /^X\(\/\/\)[^/].*/{ s//\1/; q; } + /^X\(\/\/\)$/{ s//\1/; q; } + /^X\(\/\).*/{ s//\1/; q; } + s/.*/./; q'`/stamp-h$_am_stamp_count +done _ACEOF cat >>$CONFIG_STATUS <<\_ACEOF @@ -3987,6 +5819,107 @@ done done ;; + default-1 ) + for ac_file in $CONFIG_FILES; do + # Support "outfile[:infile[:infile...]]" + case "$ac_file" in + *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + esac + # PO directories have a Makefile.in generated from Makefile.in.in. + case "$ac_file" in */Makefile.in) + # Adjust a relative srcdir. + ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` + ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" + ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` + # In autoconf-2.13 it is called $ac_given_srcdir. + # In autoconf-2.50 it is called $srcdir. + test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" + case "$ac_given_srcdir" in + .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; + /*) top_srcdir="$ac_given_srcdir" ;; + *) top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then + rm -f "$ac_dir/POTFILES" + test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" + cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" + POMAKEFILEDEPS="POTFILES.in" + # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend + # on $ac_dir but don't depend on user-specified configuration + # parameters. + if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then + # The LINGUAS file contains the set of available languages. + if test -n "$OBSOLETE_ALL_LINGUAS"; then + test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" + fi + ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"` + # Hide the ALL_LINGUAS assigment from automake. + eval 'ALL_LINGUAS''=$ALL_LINGUAS_' + POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" + else + # The set of available languages was given in configure.in. + eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' + fi + case "$ac_given_srcdir" in + .) srcdirpre= ;; + *) srcdirpre='$(srcdir)/' ;; + esac + POFILES= + GMOFILES= + UPDATEPOFILES= + DUMMYPOFILES= + for lang in $ALL_LINGUAS; do + POFILES="$POFILES $srcdirpre$lang.po" + GMOFILES="$GMOFILES $srcdirpre$lang.gmo" + UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" + DUMMYPOFILES="$DUMMYPOFILES $lang.nop" + done + # CATALOGS depends on both $ac_dir and the user's LINGUAS + # environment variable. + INST_LINGUAS= + if test -n "$ALL_LINGUAS"; then + for presentlang in $ALL_LINGUAS; do + useit=no + if test "%UNSET%" != "$LINGUAS"; then + desiredlanguages="$LINGUAS" + else + desiredlanguages="$ALL_LINGUAS" + fi + for desiredlang in $desiredlanguages; do + # Use the presentlang catalog if desiredlang is + # a. equal to presentlang, or + # b. a variant of presentlang (because in this case, + # presentlang can be used as a fallback for messages + # which are not translated in the desiredlang catalog). + case "$desiredlang" in + "$presentlang"*) useit=yes;; + esac + done + if test $useit = yes; then + INST_LINGUAS="$INST_LINGUAS $presentlang" + fi + done + fi + CATALOGS= + if test -n "$INST_LINGUAS"; then + for lang in $INST_LINGUAS; do + CATALOGS="$CATALOGS $lang.gmo" + done + fi + test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" + sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" + for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do + if test -f "$f"; then + case "$f" in + *.orig | *.bak | *~) ;; + *) cat "$f" >> "$ac_dir/Makefile" ;; + esac + fi + done + fi + ;; + esac + done ;; esac done _ACEOF diff -ruN gworldclock-1.1-orig/configure.ac gworldclock-1.1/configure.ac --- gworldclock-1.1-orig/configure.ac 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/configure.ac 2003-07-26 14:16:38.000000000 +0900 @@ -1,5 +1,5 @@ dnl Process this file with autoconf to produce a configure script. -AC_INIT(gworldclock, 1.1) +AC_INIT([gworldclock],[1.1]) AM_INIT_AUTOMAKE dnl I don't know how to get an automated date here... @@ -9,6 +9,7 @@ AM_CONFIG_HEADER(config.h) + dnl Checks for programs. AC_PROG_CC @@ -17,6 +18,12 @@ AC_SUBST(GTK2_CFLAGS) AC_SUBST(GTK2_LIBS) +ALL_LINGUAS=ja +AM_GNU_GETTEXT([external]) + +localedir='${datadir}/locale' +AC_SUBST(localedir) + dnl Checks for header files. dnl AC_CHECK_HEADERS(menu.h strings.h) @@ -24,4 +31,4 @@ dnl Checks for library functions. -AC_OUTPUT(Makefile) +AC_OUTPUT(Makefile po/Makefile.in m4/Makefile ) diff -ruN gworldclock-1.1-orig/debian/changelog gworldclock-1.1/debian/changelog --- gworldclock-1.1-orig/debian/changelog 2003-07-22 06:42:55.000000000 +0900 +++ gworldclock-1.1/debian/changelog 2003-07-22 07:11:32.000000000 +0900 @@ -1,3 +1,9 @@ +gworldclock (1.1-2) unstable; urgency=low + + * gettextize + + -- Junichi Uekawa Tue, 22 Jul 2003 07:11:32 +0900 + gworldclock (1.1-1) unstable; urgency=low * New upstream version. @@ -143,6 +149,4 @@ -- Drew Parsons Sat, 20 May 2000 00:27:39 -0700 -Local variables: -mode: debian-changelog -End: + diff -ruN gworldclock-1.1-orig/debian/control gworldclock-1.1/debian/control --- gworldclock-1.1-orig/debian/control 2003-07-22 06:42:55.000000000 +0900 +++ gworldclock-1.1/debian/control 2003-07-26 12:49:25.000000000 +0900 @@ -2,7 +2,7 @@ Section: utils Priority: optional Maintainer: Drew Parsons -Build-Depends: debhelper (>> 4.0.0), libgtk2.0-dev +Build-Depends: debhelper (>> 4.0.0), libgtk2.0-dev, gettext Standards-Version: 3.5.9 Package: gworldclock diff -ruN gworldclock-1.1-orig/debian/rules gworldclock-1.1/debian/rules --- gworldclock-1.1-orig/debian/rules 2003-07-22 06:42:55.000000000 +0900 +++ gworldclock-1.1/debian/rules 2003-07-26 14:06:14.000000000 +0900 @@ -21,8 +21,10 @@ dh_testdir dh_testroot rm -f build-stamp + -rm po/*.gmo po/stamp-po # Add here commands to clean up after the build process. + -$(MAKE) clean -$(MAKE) distclean dh_clean @@ -32,7 +34,8 @@ dh_testroot dh_clean -k dh_installdirs -pgworldclock - $(MAKE) install prefix=`pwd`/debian/tmp/usr + $(MAKE) + $(MAKE) install DESTDIR=`pwd`/debian/tmp/ # Build architecture-independent files here. binary-indep: @@ -57,7 +60,7 @@ binary-arch: build install dh_testdir dh_testroot - dh_movefiles -pgworldclock usr/bin/gworldclock + dh_movefiles -pgworldclock usr/bin/gworldclock usr/share/locale dh_installdocs -pgworldclock dh_installmenu -pgworldclock # man pages could be moved from installed tmp diff -ruN gworldclock-1.1-orig/depcomp gworldclock-1.1/depcomp --- gworldclock-1.1-orig/depcomp 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/depcomp 2003-07-26 12:45:22.000000000 +0900 @@ -206,6 +206,36 @@ rm -f "$tmpdepfile" ;; +icc) + # Must come before tru64. + + # Intel's C compiler understands `-MD -MF file'. However + # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c + # will fill foo.d with something like + # foo.o: sub/foo.c + # foo.o: sub/foo.h + # which is wrong. We want: + # sub/foo.o: sub/foo.c + # sub/foo.o: sub/foo.h + # sub/foo.c: + # sub/foo.h: + + "$@" -MD -MF "$tmpdepfile" + stat=$? + if test $stat -eq 0; then : + else + rm -f "$tmpdepfile" + exit $stat + fi + rm -f "$depfile" + # Each line is of the form `foo.o: dependent.h'. + # Do two passes, one to just change these to + # `$object: dependent.h' and one to simply `dependent.h:'. + sed -e "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" + sed -e "s,^[^:]*: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" + rm -f "$tmpdepfile" + ;; + tru64) # The Tru64 compiler uses -MD to generate dependencies as a side # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. @@ -265,9 +295,7 @@ shift fi - # Remove `-o $object'. We will use -o /dev/null later, - # however we can't do the remplacement now because - # `-o $object' might simply not be used + # Remove `-o $object'. IFS=" " for arg do @@ -287,7 +315,11 @@ done test -z "$dashmflag" && dashmflag=-M - "$@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" + # Require at least two characters before searching for `:' + # in the target name. This is to cope with DOS-style filenames: + # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. + "$@" $dashmflag | + sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" rm -f "$depfile" cat < "$tmpdepfile" > "$depfile" tr ' ' ' @@ -306,6 +338,13 @@ makedepend) "$@" || exit $? + # Remove any Libtool call + if test "$libtool" = yes; then + while test $1 != '--mode=compile'; do + shift + done + shift + fi # X makedepend shift cleared=no @@ -318,7 +357,9 @@ case "$arg" in -D*|-I*) set fnord "$@" "$arg"; shift ;; - -*) + # Strip any option that makedepend may not understand. Remove + # the object too, otherwise makedepend will parse it as a source file. + -*|$object) ;; *) set fnord "$@" "$arg"; shift ;; diff -ruN gworldclock-1.1-orig/install-sh gworldclock-1.1/install-sh --- gworldclock-1.1-orig/install-sh 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/install-sh 2003-07-26 12:45:22.000000000 +0900 @@ -1,19 +1,37 @@ #!/bin/sh # # install - install a program, script, or datafile -# This comes from X11R5 (mit/util/scripts/install.sh). # -# Copyright 1991 by the Massachusetts Institute of Technology +# This originates from X11R5 (mit/util/scripts/install.sh), which was +# later released in X11R6 (xc/config/util/install.sh) with the +# following copyright and license. # -# Permission to use, copy, modify, distribute, and sell this software and its -# documentation for any purpose is hereby granted without fee, provided that -# the above copyright notice appear in all copies and that both that -# copyright notice and this permission notice appear in supporting -# documentation, and that the name of M.I.T. not be used in advertising or -# publicity pertaining to distribution of the software without specific, -# written prior permission. M.I.T. makes no representations about the -# suitability of this software for any purpose. It is provided "as is" -# without express or implied warranty. +# Copyright (C) 1994 X Consortium +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to +# deal in the Software without restriction, including without limitation the +# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or +# sell copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in +# all copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN +# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- +# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +# +# Except as contained in this notice, the name of the X Consortium shall not +# be used in advertising or otherwise to promote the sale, use or other deal- +# ings in this Software without prior written authorization from the X Consor- +# tium. +# +# +# FSF changes to this file are in the public domain. # # Calling this script install-sh is preferred over install.sh, to prevent # `make' implicit rules from creating a file called install from it @@ -56,7 +74,7 @@ while [ x"$1" != x ]; do case $1 in - -c) instcmd="$cpprog" + -c) instcmd=$cpprog shift continue;; @@ -79,7 +97,7 @@ shift continue;; - -s) stripcmd="$stripprog" + -s) stripcmd=$stripprog shift continue;; @@ -106,7 +124,7 @@ if [ x"$src" = x ] then - echo "install: no input file specified" + echo "$0: no input file specified" >&2 exit 1 else : @@ -115,8 +133,8 @@ if [ x"$dir_arg" != x ]; then dst=$src src="" - - if [ -d $dst ]; then + + if [ -d "$dst" ]; then instcmd=: chmodcmd="" else @@ -125,20 +143,20 @@ else # Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad +# might cause directories to be created, which would be especially bad # if $src (and thus $dsttmp) contains '*'. if [ -f "$src" ] || [ -d "$src" ] then : else - echo "install: $src does not exist" + echo "$0: $src does not exist" >&2 exit 1 fi - + if [ x"$dst" = x ] then - echo "install: no destination specified" + echo "$0: no destination specified" >&2 exit 1 else : @@ -147,16 +165,16 @@ # If destination is a directory, append the input filename; if your system # does not like double slashes in filenames, you may need to add some logic - if [ -d $dst ] + if [ -d "$dst" ] then - dst="$dst"/`basename $src` + dst=$dst/`basename "$src"` else : fi fi ## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` +dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` # Make sure that the destination directory exists. # this part is taken from Noah Friedman's mkinstalldirs script @@ -165,69 +183,73 @@ if [ ! -d "$dstdir" ]; then defaultIFS=' ' -IFS="${IFS-${defaultIFS}}" +IFS="${IFS-$defaultIFS}" -oIFS="${IFS}" +oIFS=$IFS # Some sh's can't handle IFS=/ for some reason. IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" +set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'` +IFS=$oIFS pathcomp='' while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" + pathcomp=$pathcomp$1 shift - if [ ! -d "${pathcomp}" ] ; + if [ ! -d "$pathcomp" ] ; then - $mkdirprog "${pathcomp}" + $mkdirprog "$pathcomp" else : fi - pathcomp="${pathcomp}/" + pathcomp=$pathcomp/ done fi if [ x"$dir_arg" != x ] then - $doit $instcmd $dst && + $doit $instcmd "$dst" && - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi + if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi else # If we're going to rename the final executable, determine the name now. - if [ x"$transformarg" = x ] + if [ x"$transformarg" = x ] then - dstfile=`basename $dst` + dstfile=`basename "$dst"` else - dstfile=`basename $dst $transformbasename | + dstfile=`basename "$dst" $transformbasename | sed $transformarg`$transformbasename fi # don't allow the sed command to completely eliminate the filename - if [ x"$dstfile" = x ] + if [ x"$dstfile" = x ] then - dstfile=`basename $dst` + dstfile=`basename "$dst"` else : fi -# Make a temp file name in the proper directory. +# Make a couple of temp file names in the proper directory. dsttmp=$dstdir/#inst.$$# + rmtmp=$dstdir/#rm.$$# -# Move or copy the file name to the temp name +# Trap to clean up temp files at exit. + + trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0 + trap '(exit $?); exit' 1 2 13 15 - $doit $instcmd $src $dsttmp && +# Move or copy the file name to the temp name - trap "rm -f ${dsttmp}" 0 && + $doit $instcmd "$src" "$dsttmp" && # and set any options; do chmod last to preserve setuid bits @@ -235,17 +257,38 @@ # ignore errors from any of these, just make sure not to ignore # errors from the above "$doit $instcmd $src $dsttmp" command. - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi && + if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi && + if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi && + if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi && + if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi && + +# Now remove or move aside any old file at destination location. We try this +# two ways since rm can't unlink itself on some systems and the destination +# file might be busy for other reasons. In this case, the final cleanup +# might fail but the new file should still install successfully. + +{ + if [ -f "$dstdir/$dstfile" ] + then + $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null || + $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null || + { + echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2 + (exit 1); exit + } + else + : + fi +} && # Now rename the file to the real destination. - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile + $doit $mvcmd "$dsttmp" "$dstdir/$dstfile" fi && +# The final little trick to "correctly" pass the exit status to the exit trap. -exit 0 +{ + (exit 0); exit +} diff -ruN gworldclock-1.1-orig/m4/ChangeLog gworldclock-1.1/m4/ChangeLog --- gworldclock-1.1-orig/m4/ChangeLog 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/ChangeLog 2003-07-22 07:00:22.000000000 +0900 @@ -0,0 +1,23 @@ +2003-07-22 gettextize + + * codeset.m4: New file, from gettext-0.12.1. + * gettext.m4: New file, from gettext-0.12.1. + * glibc21.m4: New file, from gettext-0.12.1. + * iconv.m4: New file, from gettext-0.12.1. + * intdiv0.m4: New file, from gettext-0.12.1. + * inttypes.m4: New file, from gettext-0.12.1. + * inttypes_h.m4: New file, from gettext-0.12.1. + * inttypes-pri.m4: New file, from gettext-0.12.1. + * isc-posix.m4: New file, from gettext-0.12.1. + * lcmessage.m4: New file, from gettext-0.12.1. + * lib-ld.m4: New file, from gettext-0.12.1. + * lib-link.m4: New file, from gettext-0.12.1. + * lib-prefix.m4: New file, from gettext-0.12.1. + * nls.m4: New file, from gettext-0.12.1. + * po.m4: New file, from gettext-0.12.1. + * progtest.m4: New file, from gettext-0.12.1. + * stdint_h.m4: New file, from gettext-0.12.1. + * uintmax_t.m4: New file, from gettext-0.12.1. + * ulonglong.m4: New file, from gettext-0.12.1. + * Makefile.am: New file. + diff -ruN gworldclock-1.1-orig/m4/Makefile.am gworldclock-1.1/m4/Makefile.am --- gworldclock-1.1-orig/m4/Makefile.am 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/Makefile.am 2003-07-22 07:00:22.000000000 +0900 @@ -0,0 +1 @@ +EXTRA_DIST = codeset.m4 gettext.m4 glibc21.m4 iconv.m4 intdiv0.m4 inttypes.m4 inttypes_h.m4 inttypes-pri.m4 isc-posix.m4 lcmessage.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 nls.m4 po.m4 progtest.m4 stdint_h.m4 uintmax_t.m4 ulonglong.m4 diff -ruN gworldclock-1.1-orig/m4/Makefile.in gworldclock-1.1/m4/Makefile.in --- gworldclock-1.1-orig/m4/Makefile.in 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/Makefile.in 2003-07-26 14:17:55.000000000 +0900 @@ -0,0 +1,268 @@ +# Makefile.in generated by automake 1.7.5 from Makefile.am. +# @configure_input@ + +# Copyright 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 +# Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +top_builddir = .. + +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +INSTALL = @INSTALL@ +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +host_triplet = @host@ +ACLOCAL = @ACLOCAL@ +AMDEP_FALSE = @AMDEP_FALSE@ +AMDEP_TRUE = @AMDEP_TRUE@ +AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EXEEXT = @EXEEXT@ +GMSGFMT = @GMSGFMT@ +GTK2_CFLAGS = @GTK2_CFLAGS@ +GTK2_LIBS = @GTK2_LIBS@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +INTLLIBS = @INTLLIBS@ +LDFLAGS = @LDFLAGS@ +LIBICONV = @LIBICONV@ +LIBINTL = @LIBINTL@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBICONV = @LTLIBICONV@ +LTLIBINTL = @LTLIBINTL@ +LTLIBOBJS = @LTLIBOBJS@ +MAKEINFO = @MAKEINFO@ +MKINSTALLDIRS = @MKINSTALLDIRS@ +MSGFMT = @MSGFMT@ +MSGMERGE = @MSGMERGE@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PKG_CONFIG = @PKG_CONFIG@ +POSUB = @POSUB@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +USE_NLS = @USE_NLS@ +VERSION = @VERSION@ +XGETTEXT = @XGETTEXT@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_STRIP = @ac_ct_STRIP@ +am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ +am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +datadir = @datadir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +oldincludedir = @oldincludedir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +EXTRA_DIST = codeset.m4 gettext.m4 glibc21.m4 iconv.m4 intdiv0.m4 inttypes.m4 inttypes_h.m4 inttypes-pri.m4 isc-posix.m4 lcmessage.m4 lib-ld.m4 lib-link.m4 lib-prefix.m4 nls.m4 po.m4 progtest.m4 stdint_h.m4 uintmax_t.m4 ulonglong.m4 +subdir = m4 +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = $(top_builddir)/config.h +CONFIG_CLEAN_FILES = +DIST_SOURCES = +DIST_COMMON = ChangeLog Makefile.am Makefile.in +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.ac $(ACLOCAL_M4) + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu m4/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe) +uninstall-info-am: +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) + +top_distdir = .. +distdir = $(top_distdir)/$(PACKAGE)-$(VERSION) + +distdir: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ + list='$(DISTFILES)'; for file in $$list; do \ + case $$file in \ + $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ + $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ + esac; \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test "$$dir" != "$$file" && test "$$dir" != "."; then \ + dir="/$$dir"; \ + $(mkinstalldirs) "$(distdir)$$dir"; \ + else \ + dir=''; \ + fi; \ + if test -d $$d/$$file; then \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile + +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -rm -f Makefile $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-am + +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +info: info-am + +info-am: + +install-data-am: + +install-exec-am: + +install-info: install-info-am + +install-man: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-info-am + +.PHONY: all all-am check check-am clean clean-generic distclean \ + distclean-generic distdir dvi dvi-am info info-am install \ + install-am install-data install-data-am install-exec \ + install-exec-am install-info install-info-am install-man \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic pdf pdf-am ps ps-am uninstall uninstall-am \ + uninstall-info-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff -ruN gworldclock-1.1-orig/m4/codeset.m4 gworldclock-1.1/m4/codeset.m4 --- gworldclock-1.1-orig/m4/codeset.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/codeset.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,23 @@ +# codeset.m4 serial AM1 (gettext-0.10.40) +dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +AC_DEFUN([AM_LANGINFO_CODESET], +[ + AC_CACHE_CHECK([for nl_langinfo and CODESET], am_cv_langinfo_codeset, + [AC_TRY_LINK([#include ], + [char* cs = nl_langinfo(CODESET);], + am_cv_langinfo_codeset=yes, + am_cv_langinfo_codeset=no) + ]) + if test $am_cv_langinfo_codeset = yes; then + AC_DEFINE(HAVE_LANGINFO_CODESET, 1, + [Define if you have and nl_langinfo(CODESET).]) + fi +]) diff -ruN gworldclock-1.1-orig/m4/gettext.m4 gworldclock-1.1/m4/gettext.m4 --- gworldclock-1.1-orig/m4/gettext.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/gettext.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,415 @@ +# gettext.m4 serial 20 (gettext-0.12) +dnl Copyright (C) 1995-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995-2000. +dnl Bruno Haible , 2000-2003. + +dnl Macro to add for using GNU gettext. + +dnl Usage: AM_GNU_GETTEXT([INTLSYMBOL], [NEEDSYMBOL], [INTLDIR]). +dnl INTLSYMBOL can be one of 'external', 'no-libtool', 'use-libtool'. The +dnl default (if it is not specified or empty) is 'no-libtool'. +dnl INTLSYMBOL should be 'external' for packages with no intl directory, +dnl and 'no-libtool' or 'use-libtool' for packages with an intl directory. +dnl If INTLSYMBOL is 'use-libtool', then a libtool library +dnl $(top_builddir)/intl/libintl.la will be created (shared and/or static, +dnl depending on --{enable,disable}-{shared,static} and on the presence of +dnl AM-DISABLE-SHARED). If INTLSYMBOL is 'no-libtool', a static library +dnl $(top_builddir)/intl/libintl.a will be created. +dnl If NEEDSYMBOL is specified and is 'need-ngettext', then GNU gettext +dnl implementations (in libc or libintl) without the ngettext() function +dnl will be ignored. If NEEDSYMBOL is specified and is +dnl 'need-formatstring-macros', then GNU gettext implementations that don't +dnl support the ISO C 99 formatstring macros will be ignored. +dnl INTLDIR is used to find the intl libraries. If empty, +dnl the value `$(top_builddir)/intl/' is used. +dnl +dnl The result of the configuration is one of three cases: +dnl 1) GNU gettext, as included in the intl subdirectory, will be compiled +dnl and used. +dnl Catalog format: GNU --> install in $(datadir) +dnl Catalog extension: .mo after installation, .gmo in source tree +dnl 2) GNU gettext has been found in the system's C library. +dnl Catalog format: GNU --> install in $(datadir) +dnl Catalog extension: .mo after installation, .gmo in source tree +dnl 3) No internationalization, always use English msgid. +dnl Catalog format: none +dnl Catalog extension: none +dnl If INTLSYMBOL is 'external', only cases 2 and 3 can occur. +dnl The use of .gmo is historical (it was needed to avoid overwriting the +dnl GNU format catalogs when building on a platform with an X/Open gettext), +dnl but we keep it in order not to force irrelevant filename changes on the +dnl maintainers. +dnl +AC_DEFUN([AM_GNU_GETTEXT], +[ + dnl Argument checking. + ifelse([$1], [], , [ifelse([$1], [external], , [ifelse([$1], [no-libtool], , [ifelse([$1], [use-libtool], , + [errprint([ERROR: invalid first argument to AM_GNU_GETTEXT +])])])])]) + ifelse([$2], [], , [ifelse([$2], [need-ngettext], , [ifelse([$2], [need-formatstring-macros], , + [errprint([ERROR: invalid second argument to AM_GNU_GETTEXT +])])])]) + define(gt_included_intl, ifelse([$1], [external], [no], [yes])) + define(gt_libtool_suffix_prefix, ifelse([$1], [use-libtool], [l], [])) + + AC_REQUIRE([AM_PO_SUBDIRS])dnl + ifelse(gt_included_intl, yes, [ + AC_REQUIRE([AM_INTL_SUBDIR])dnl + ]) + + dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + + dnl Sometimes libintl requires libiconv, so first search for libiconv. + dnl Ideally we would do this search only after the + dnl if test "$USE_NLS" = "yes"; then + dnl if test "$gt_cv_func_gnugettext_libc" != "yes"; then + dnl tests. But if configure.in invokes AM_ICONV after AM_GNU_GETTEXT + dnl the configure script would need to contain the same shell code + dnl again, outside any 'if'. There are two solutions: + dnl - Invoke AM_ICONV_LINKFLAGS_BODY here, outside any 'if'. + dnl - Control the expansions in more detail using AC_PROVIDE_IFELSE. + dnl Since AC_PROVIDE_IFELSE is only in autoconf >= 2.52 and not + dnl documented, we avoid it. + ifelse(gt_included_intl, yes, , [ + AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) + ]) + + dnl Set USE_NLS. + AM_NLS + + ifelse(gt_included_intl, yes, [ + BUILD_INCLUDED_LIBINTL=no + USE_INCLUDED_LIBINTL=no + ]) + LIBINTL= + LTLIBINTL= + POSUB= + + dnl If we use NLS figure out what method + if test "$USE_NLS" = "yes"; then + gt_use_preinstalled_gnugettext=no + ifelse(gt_included_intl, yes, [ + AC_MSG_CHECKING([whether included gettext is requested]) + AC_ARG_WITH(included-gettext, + [ --with-included-gettext use the GNU gettext library included here], + nls_cv_force_use_gnu_gettext=$withval, + nls_cv_force_use_gnu_gettext=no) + AC_MSG_RESULT($nls_cv_force_use_gnu_gettext) + + nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" + if test "$nls_cv_force_use_gnu_gettext" != "yes"; then + ]) + dnl User does not insist on using GNU NLS library. Figure out what + dnl to use. If GNU gettext is available we use this. Else we have + dnl to fall back to GNU NLS library. + + dnl Add a version number to the cache macros. + define([gt_api_version], ifelse([$2], [need-formatstring-macros], 3, ifelse([$2], [need-ngettext], 2, 1))) + define([gt_cv_func_gnugettext_libc], [gt_cv_func_gnugettext]gt_api_version[_libc]) + define([gt_cv_func_gnugettext_libintl], [gt_cv_func_gnugettext]gt_api_version[_libintl]) + + AC_CACHE_CHECK([for GNU gettext in libc], gt_cv_func_gnugettext_libc, + [AC_TRY_LINK([#include +]ifelse([$2], [need-formatstring-macros], +[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +changequote(,)dnl +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +changequote([,])dnl +], [])[extern int _nl_msg_cat_cntr; +extern int *_nl_domain_bindings;], + [bindtextdomain ("", ""); +return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_domain_bindings], + gt_cv_func_gnugettext_libc=yes, + gt_cv_func_gnugettext_libc=no)]) + + if test "$gt_cv_func_gnugettext_libc" != "yes"; then + dnl Sometimes libintl requires libiconv, so first search for libiconv. + ifelse(gt_included_intl, yes, , [ + AM_ICONV_LINK + ]) + dnl Search for libintl and define LIBINTL, LTLIBINTL and INCINTL + dnl accordingly. Don't use AC_LIB_LINKFLAGS_BODY([intl],[iconv]) + dnl because that would add "-liconv" to LIBINTL and LTLIBINTL + dnl even if libiconv doesn't exist. + AC_LIB_LINKFLAGS_BODY([intl]) + AC_CACHE_CHECK([for GNU gettext in libintl], + gt_cv_func_gnugettext_libintl, + [gt_save_CPPFLAGS="$CPPFLAGS" + CPPFLAGS="$CPPFLAGS $INCINTL" + gt_save_LIBS="$LIBS" + LIBS="$LIBS $LIBINTL" + dnl Now see whether libintl exists and does not depend on libiconv. + AC_TRY_LINK([#include +]ifelse([$2], [need-formatstring-macros], +[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +changequote(,)dnl +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +changequote([,])dnl +], [])[extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias ();], + [bindtextdomain ("", ""); +return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)], + gt_cv_func_gnugettext_libintl=yes, + gt_cv_func_gnugettext_libintl=no) + dnl Now see whether libintl exists and depends on libiconv. + if test "$gt_cv_func_gnugettext_libintl" != yes && test -n "$LIBICONV"; then + LIBS="$LIBS $LIBICONV" + AC_TRY_LINK([#include +]ifelse([$2], [need-formatstring-macros], +[#ifndef __GNU_GETTEXT_SUPPORTED_REVISION +#define __GNU_GETTEXT_SUPPORTED_REVISION(major) ((major) == 0 ? 0 : -1) +#endif +changequote(,)dnl +typedef int array [2 * (__GNU_GETTEXT_SUPPORTED_REVISION(0) >= 1) - 1]; +changequote([,])dnl +], [])[extern int _nl_msg_cat_cntr; +extern +#ifdef __cplusplus +"C" +#endif +const char *_nl_expand_alias ();], + [bindtextdomain ("", ""); +return (int) gettext ("")]ifelse([$2], [need-ngettext], [ + (int) ngettext ("", "", 0)], [])[ + _nl_msg_cat_cntr + *_nl_expand_alias (0)], + [LIBINTL="$LIBINTL $LIBICONV" + LTLIBINTL="$LTLIBINTL $LTLIBICONV" + gt_cv_func_gnugettext_libintl=yes + ]) + fi + CPPFLAGS="$gt_save_CPPFLAGS" + LIBS="$gt_save_LIBS"]) + fi + + dnl If an already present or preinstalled GNU gettext() is found, + dnl use it. But if this macro is used in GNU gettext, and GNU + dnl gettext is already preinstalled in libintl, we update this + dnl libintl. (Cf. the install rule in intl/Makefile.in.) + if test "$gt_cv_func_gnugettext_libc" = "yes" \ + || { test "$gt_cv_func_gnugettext_libintl" = "yes" \ + && test "$PACKAGE" != gettext-runtime \ + && test "$PACKAGE" != gettext-tools; }; then + gt_use_preinstalled_gnugettext=yes + else + dnl Reset the values set by searching for libintl. + LIBINTL= + LTLIBINTL= + INCINTL= + fi + + ifelse(gt_included_intl, yes, [ + if test "$gt_use_preinstalled_gnugettext" != "yes"; then + dnl GNU gettext is not found in the C library. + dnl Fall back on included GNU gettext library. + nls_cv_use_gnu_gettext=yes + fi + fi + + if test "$nls_cv_use_gnu_gettext" = "yes"; then + dnl Mark actions used to generate GNU NLS library. + BUILD_INCLUDED_LIBINTL=yes + USE_INCLUDED_LIBINTL=yes + LIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LIBICONV" + LTLIBINTL="ifelse([$3],[],\${top_builddir}/intl,[$3])/libintl.[]gt_libtool_suffix_prefix[]a $LTLIBICONV" + LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` + fi + + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + dnl Mark actions to use GNU gettext tools. + CATOBJEXT=.gmo + fi + ]) + + if test "$gt_use_preinstalled_gnugettext" = "yes" \ + || test "$nls_cv_use_gnu_gettext" = "yes"; then + AC_DEFINE(ENABLE_NLS, 1, + [Define to 1 if translation of program messages to the user's native language + is requested.]) + else + USE_NLS=no + fi + fi + + AC_MSG_CHECKING([whether to use NLS]) + AC_MSG_RESULT([$USE_NLS]) + if test "$USE_NLS" = "yes"; then + AC_MSG_CHECKING([where the gettext function comes from]) + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if test "$gt_cv_func_gnugettext_libintl" = "yes"; then + gt_source="external libintl" + else + gt_source="libc" + fi + else + gt_source="included intl directory" + fi + AC_MSG_RESULT([$gt_source]) + fi + + if test "$USE_NLS" = "yes"; then + + if test "$gt_use_preinstalled_gnugettext" = "yes"; then + if test "$gt_cv_func_gnugettext_libintl" = "yes"; then + AC_MSG_CHECKING([how to link with libintl]) + AC_MSG_RESULT([$LIBINTL]) + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCINTL]) + fi + + dnl For backward compatibility. Some packages may be using this. + AC_DEFINE(HAVE_GETTEXT, 1, + [Define if the GNU gettext() function is already present or preinstalled.]) + AC_DEFINE(HAVE_DCGETTEXT, 1, + [Define if the GNU dcgettext() function is already present or preinstalled.]) + fi + + dnl We need to process the po/ directory. + POSUB=po + fi + + ifelse(gt_included_intl, yes, [ + dnl If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL + dnl to 'yes' because some of the testsuite requires it. + if test "$PACKAGE" = gettext-runtime || test "$PACKAGE" = gettext-tools; then + BUILD_INCLUDED_LIBINTL=yes + fi + + dnl Make all variables we use known to autoconf. + AC_SUBST(BUILD_INCLUDED_LIBINTL) + AC_SUBST(USE_INCLUDED_LIBINTL) + AC_SUBST(CATOBJEXT) + + dnl For backward compatibility. Some configure.ins may be using this. + nls_cv_header_intl= + nls_cv_header_libgt= + + dnl For backward compatibility. Some Makefiles may be using this. + DATADIRNAME=share + AC_SUBST(DATADIRNAME) + + dnl For backward compatibility. Some Makefiles may be using this. + INSTOBJEXT=.mo + AC_SUBST(INSTOBJEXT) + + dnl For backward compatibility. Some Makefiles may be using this. + GENCAT=gencat + AC_SUBST(GENCAT) + + dnl For backward compatibility. Some Makefiles may be using this. + if test "$USE_INCLUDED_LIBINTL" = yes; then + INTLOBJS="\$(GETTOBJS)" + fi + AC_SUBST(INTLOBJS) + + dnl Enable libtool support if the surrounding package wishes it. + INTL_LIBTOOL_SUFFIX_PREFIX=gt_libtool_suffix_prefix + AC_SUBST(INTL_LIBTOOL_SUFFIX_PREFIX) + ]) + + dnl For backward compatibility. Some Makefiles may be using this. + INTLLIBS="$LIBINTL" + AC_SUBST(INTLLIBS) + + dnl Make all documented variables known to autoconf. + AC_SUBST(LIBINTL) + AC_SUBST(LTLIBINTL) + AC_SUBST(POSUB) +]) + + +dnl Checks for all prerequisites of the intl subdirectory, +dnl except for INTL_LIBTOOL_SUFFIX_PREFIX (and possibly LIBTOOL), INTLOBJS, +dnl USE_INCLUDED_LIBINTL, BUILD_INCLUDED_LIBINTL. +AC_DEFUN([AM_INTL_SUBDIR], +[ + AC_REQUIRE([AC_PROG_INSTALL])dnl + AC_REQUIRE([AM_MKINSTALLDIRS])dnl + AC_REQUIRE([AC_PROG_CC])dnl + AC_REQUIRE([AC_CANONICAL_HOST])dnl + AC_REQUIRE([AC_PROG_RANLIB])dnl + AC_REQUIRE([AC_ISC_POSIX])dnl + AC_REQUIRE([AC_HEADER_STDC])dnl + AC_REQUIRE([AC_C_CONST])dnl + AC_REQUIRE([AC_C_INLINE])dnl + AC_REQUIRE([AC_TYPE_OFF_T])dnl + AC_REQUIRE([AC_TYPE_SIZE_T])dnl + AC_REQUIRE([AC_FUNC_ALLOCA])dnl + AC_REQUIRE([AC_FUNC_MMAP])dnl + AC_REQUIRE([jm_GLIBC21])dnl + AC_REQUIRE([gt_INTDIV0])dnl + AC_REQUIRE([jm_AC_TYPE_UINTMAX_T])dnl + AC_REQUIRE([gt_HEADER_INTTYPES_H])dnl + AC_REQUIRE([gt_INTTYPES_PRI])dnl + + AC_CHECK_HEADERS([argz.h limits.h locale.h nl_types.h malloc.h stddef.h \ +stdlib.h string.h unistd.h sys/param.h]) + AC_CHECK_FUNCS([feof_unlocked fgets_unlocked getc_unlocked getcwd getegid \ +geteuid getgid getuid mempcpy munmap putenv setenv setlocale stpcpy \ +strcasecmp strdup strtoul tsearch __argz_count __argz_stringify __argz_next \ +__fsetlocking]) + + AM_ICONV + AM_LANGINFO_CODESET + if test $ac_cv_header_locale_h = yes; then + AM_LC_MESSAGES + fi + + dnl intl/plural.c is generated from intl/plural.y. It requires bison, + dnl because plural.y uses bison specific features. It requires at least + dnl bison-1.26 because earlier versions generate a plural.c that doesn't + dnl compile. + dnl bison is only needed for the maintainer (who touches plural.y). But in + dnl order to avoid separate Makefiles or --enable-maintainer-mode, we put + dnl the rule in general Makefile. Now, some people carelessly touch the + dnl files or have a broken "make" program, hence the plural.c rule will + dnl sometimes fire. To avoid an error, defines BISON to ":" if it is not + dnl present or too old. + AC_CHECK_PROGS([INTLBISON], [bison]) + if test -z "$INTLBISON"; then + ac_verc_fail=yes + else + dnl Found it, now check the version. + AC_MSG_CHECKING([version of bison]) +changequote(<<,>>)dnl + ac_prog_version=`$INTLBISON --version 2>&1 | sed -n 's/^.*GNU Bison.* \([0-9]*\.[0-9.]*\).*$/\1/p'` + case $ac_prog_version in + '') ac_prog_version="v. ?.??, bad"; ac_verc_fail=yes;; + 1.2[6-9]* | 1.[3-9][0-9]* | [2-9].*) +changequote([,])dnl + ac_prog_version="$ac_prog_version, ok"; ac_verc_fail=no;; + *) ac_prog_version="$ac_prog_version, bad"; ac_verc_fail=yes;; + esac + AC_MSG_RESULT([$ac_prog_version]) + fi + if test $ac_verc_fail = yes; then + INTLBISON=: + fi +]) + + +dnl Usage: AM_GNU_GETTEXT_VERSION([gettext-version]) +AC_DEFUN([AM_GNU_GETTEXT_VERSION], []) diff -ruN gworldclock-1.1-orig/m4/glibc21.m4 gworldclock-1.1/m4/glibc21.m4 --- gworldclock-1.1-orig/m4/glibc21.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/glibc21.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,32 @@ +# glibc21.m4 serial 2 (fileutils-4.1.3, gettext-0.10.40) +dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +# Test for the GNU C Library, version 2.1 or newer. +# From Bruno Haible. + +AC_DEFUN([jm_GLIBC21], + [ + AC_CACHE_CHECK(whether we are using the GNU C Library 2.1 or newer, + ac_cv_gnu_library_2_1, + [AC_EGREP_CPP([Lucky GNU user], + [ +#include +#ifdef __GNU_LIBRARY__ + #if (__GLIBC__ == 2 && __GLIBC_MINOR__ >= 1) || (__GLIBC__ > 2) + Lucky GNU user + #endif +#endif + ], + ac_cv_gnu_library_2_1=yes, + ac_cv_gnu_library_2_1=no) + ] + ) + AC_SUBST(GLIBC21) + GLIBC21="$ac_cv_gnu_library_2_1" + ] +) diff -ruN gworldclock-1.1-orig/m4/iconv.m4 gworldclock-1.1/m4/iconv.m4 --- gworldclock-1.1-orig/m4/iconv.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/iconv.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,103 @@ +# iconv.m4 serial AM4 (gettext-0.11.3) +dnl Copyright (C) 2000-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +AC_DEFUN([AM_ICONV_LINKFLAGS_BODY], +[ + dnl Prerequisites of AC_LIB_LINKFLAGS_BODY. + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + + dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV + dnl accordingly. + AC_LIB_LINKFLAGS_BODY([iconv]) +]) + +AC_DEFUN([AM_ICONV_LINK], +[ + dnl Some systems have iconv in libc, some have it in libiconv (OSF/1 and + dnl those with the standalone portable GNU libiconv installed). + + dnl Search for libiconv and define LIBICONV, LTLIBICONV and INCICONV + dnl accordingly. + AC_REQUIRE([AM_ICONV_LINKFLAGS_BODY]) + + dnl Add $INCICONV to CPPFLAGS before performing the following checks, + dnl because if the user has installed libiconv and not disabled its use + dnl via --without-libiconv-prefix, he wants to use it. The first + dnl AC_TRY_LINK will then fail, the second AC_TRY_LINK will succeed. + am_save_CPPFLAGS="$CPPFLAGS" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INCICONV]) + + AC_CACHE_CHECK(for iconv, am_cv_func_iconv, [ + am_cv_func_iconv="no, consider installing GNU libiconv" + am_cv_lib_iconv=no + AC_TRY_LINK([#include +#include ], + [iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd);], + am_cv_func_iconv=yes) + if test "$am_cv_func_iconv" != yes; then + am_save_LIBS="$LIBS" + LIBS="$LIBS $LIBICONV" + AC_TRY_LINK([#include +#include ], + [iconv_t cd = iconv_open("",""); + iconv(cd,NULL,NULL,NULL,NULL); + iconv_close(cd);], + am_cv_lib_iconv=yes + am_cv_func_iconv=yes) + LIBS="$am_save_LIBS" + fi + ]) + if test "$am_cv_func_iconv" = yes; then + AC_DEFINE(HAVE_ICONV, 1, [Define if you have the iconv() function.]) + fi + if test "$am_cv_lib_iconv" = yes; then + AC_MSG_CHECKING([how to link with libiconv]) + AC_MSG_RESULT([$LIBICONV]) + else + dnl If $LIBICONV didn't lead to a usable library, we don't need $INCICONV + dnl either. + CPPFLAGS="$am_save_CPPFLAGS" + LIBICONV= + LTLIBICONV= + fi + AC_SUBST(LIBICONV) + AC_SUBST(LTLIBICONV) +]) + +AC_DEFUN([AM_ICONV], +[ + AM_ICONV_LINK + if test "$am_cv_func_iconv" = yes; then + AC_MSG_CHECKING([for iconv declaration]) + AC_CACHE_VAL(am_cv_proto_iconv, [ + AC_TRY_COMPILE([ +#include +#include +extern +#ifdef __cplusplus +"C" +#endif +#if defined(__STDC__) || defined(__cplusplus) +size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft); +#else +size_t iconv(); +#endif +], [], am_cv_proto_iconv_arg1="", am_cv_proto_iconv_arg1="const") + am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t *outbytesleft);"]) + am_cv_proto_iconv=`echo "[$]am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` + AC_MSG_RESULT([$]{ac_t:- + }[$]am_cv_proto_iconv) + AC_DEFINE_UNQUOTED(ICONV_CONST, $am_cv_proto_iconv_arg1, + [Define as const if the declaration of iconv() needs const.]) + fi +]) diff -ruN gworldclock-1.1-orig/m4/intdiv0.m4 gworldclock-1.1/m4/intdiv0.m4 --- gworldclock-1.1-orig/m4/intdiv0.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/intdiv0.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,72 @@ +# intdiv0.m4 serial 1 (gettext-0.11.3) +dnl Copyright (C) 2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +AC_DEFUN([gt_INTDIV0], +[ + AC_REQUIRE([AC_PROG_CC])dnl + AC_REQUIRE([AC_CANONICAL_HOST])dnl + + AC_CACHE_CHECK([whether integer division by zero raises SIGFPE], + gt_cv_int_divbyzero_sigfpe, + [ + AC_TRY_RUN([ +#include +#include + +static void +#ifdef __cplusplus +sigfpe_handler (int sig) +#else +sigfpe_handler (sig) int sig; +#endif +{ + /* Exit with code 0 if SIGFPE, with code 1 if any other signal. */ + exit (sig != SIGFPE); +} + +int x = 1; +int y = 0; +int z; +int nan; + +int main () +{ + signal (SIGFPE, sigfpe_handler); +/* IRIX and AIX (when "xlc -qcheck" is used) yield signal SIGTRAP. */ +#if (defined (__sgi) || defined (_AIX)) && defined (SIGTRAP) + signal (SIGTRAP, sigfpe_handler); +#endif +/* Linux/SPARC yields signal SIGILL. */ +#if defined (__sparc__) && defined (__linux__) + signal (SIGILL, sigfpe_handler); +#endif + + z = x / y; + nan = y / y; + exit (1); +} +], gt_cv_int_divbyzero_sigfpe=yes, gt_cv_int_divbyzero_sigfpe=no, + [ + # Guess based on the CPU. + case "$host_cpu" in + alpha* | i[34567]86 | m68k | s390*) + gt_cv_int_divbyzero_sigfpe="guessing yes";; + *) + gt_cv_int_divbyzero_sigfpe="guessing no";; + esac + ]) + ]) + case "$gt_cv_int_divbyzero_sigfpe" in + *yes) value=1;; + *) value=0;; + esac + AC_DEFINE_UNQUOTED(INTDIV0_RAISES_SIGFPE, $value, + [Define if integer division by zero raises signal SIGFPE.]) +]) diff -ruN gworldclock-1.1-orig/m4/inttypes-pri.m4 gworldclock-1.1/m4/inttypes-pri.m4 --- gworldclock-1.1-orig/m4/inttypes-pri.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/inttypes-pri.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,32 @@ +# inttypes-pri.m4 serial 1 (gettext-0.11.4) +dnl Copyright (C) 1997-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +# Define PRI_MACROS_BROKEN if exists and defines the PRI* +# macros to non-string values. This is the case on AIX 4.3.3. + +AC_DEFUN([gt_INTTYPES_PRI], +[ + AC_REQUIRE([gt_HEADER_INTTYPES_H]) + if test $gt_cv_header_inttypes_h = yes; then + AC_CACHE_CHECK([whether the inttypes.h PRIxNN macros are broken], + gt_cv_inttypes_pri_broken, + [ + AC_TRY_COMPILE([#include +#ifdef PRId32 +char *p = PRId32; +#endif +], [], gt_cv_inttypes_pri_broken=no, gt_cv_inttypes_pri_broken=yes) + ]) + fi + if test "$gt_cv_inttypes_pri_broken" = yes; then + AC_DEFINE_UNQUOTED(PRI_MACROS_BROKEN, 1, + [Define if exists and defines unusable PRI* macros.]) + fi +]) diff -ruN gworldclock-1.1-orig/m4/inttypes.m4 gworldclock-1.1/m4/inttypes.m4 --- gworldclock-1.1-orig/m4/inttypes.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/inttypes.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,27 @@ +# inttypes.m4 serial 1 (gettext-0.11.4) +dnl Copyright (C) 1997-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Paul Eggert. + +# Define HAVE_INTTYPES_H if exists and doesn't clash with +# . + +AC_DEFUN([gt_HEADER_INTTYPES_H], +[ + AC_CACHE_CHECK([for inttypes.h], gt_cv_header_inttypes_h, + [ + AC_TRY_COMPILE( + [#include +#include ], + [], gt_cv_header_inttypes_h=yes, gt_cv_header_inttypes_h=no) + ]) + if test $gt_cv_header_inttypes_h = yes; then + AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H, 1, + [Define if exists and doesn't clash with .]) + fi +]) diff -ruN gworldclock-1.1-orig/m4/inttypes_h.m4 gworldclock-1.1/m4/inttypes_h.m4 --- gworldclock-1.1-orig/m4/inttypes_h.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/inttypes_h.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,28 @@ +# inttypes_h.m4 serial 5 (gettext-0.12) +dnl Copyright (C) 1997-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Paul Eggert. + +# Define HAVE_INTTYPES_H_WITH_UINTMAX if exists, +# doesn't clash with , and declares uintmax_t. + +AC_DEFUN([jm_AC_HEADER_INTTYPES_H], +[ + AC_CACHE_CHECK([for inttypes.h], jm_ac_cv_header_inttypes_h, + [AC_TRY_COMPILE( + [#include +#include ], + [uintmax_t i = (uintmax_t) -1;], + jm_ac_cv_header_inttypes_h=yes, + jm_ac_cv_header_inttypes_h=no)]) + if test $jm_ac_cv_header_inttypes_h = yes; then + AC_DEFINE_UNQUOTED(HAVE_INTTYPES_H_WITH_UINTMAX, 1, + [Define if exists, doesn't clash with , + and declares uintmax_t. ]) + fi +]) diff -ruN gworldclock-1.1-orig/m4/isc-posix.m4 gworldclock-1.1/m4/isc-posix.m4 --- gworldclock-1.1-orig/m4/isc-posix.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/isc-posix.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,26 @@ +# isc-posix.m4 serial 2 (gettext-0.11.2) +dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +# This file is not needed with autoconf-2.53 and newer. Remove it in 2005. + +# This test replaces the one in autoconf. +# Currently this macro should have the same name as the autoconf macro +# because gettext's gettext.m4 (distributed in the automake package) +# still uses it. Otherwise, the use in gettext.m4 makes autoheader +# give these diagnostics: +# configure.in:556: AC_TRY_COMPILE was called before AC_ISC_POSIX +# configure.in:556: AC_TRY_RUN was called before AC_ISC_POSIX + +undefine([AC_ISC_POSIX]) + +AC_DEFUN([AC_ISC_POSIX], + [ + dnl This test replaces the obsolescent AC_ISC_POSIX kludge. + AC_CHECK_LIB(cposix, strerror, [LIBS="$LIBS -lcposix"]) + ] +) diff -ruN gworldclock-1.1-orig/m4/lcmessage.m4 gworldclock-1.1/m4/lcmessage.m4 --- gworldclock-1.1-orig/m4/lcmessage.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/lcmessage.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,32 @@ +# lcmessage.m4 serial 3 (gettext-0.11.3) +dnl Copyright (C) 1995-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995. + +# Check whether LC_MESSAGES is available in . + +AC_DEFUN([AM_LC_MESSAGES], +[ + AC_CACHE_CHECK([for LC_MESSAGES], am_cv_val_LC_MESSAGES, + [AC_TRY_LINK([#include ], [return LC_MESSAGES], + am_cv_val_LC_MESSAGES=yes, am_cv_val_LC_MESSAGES=no)]) + if test $am_cv_val_LC_MESSAGES = yes; then + AC_DEFINE(HAVE_LC_MESSAGES, 1, + [Define if your file defines LC_MESSAGES.]) + fi +]) diff -ruN gworldclock-1.1-orig/m4/lib-ld.m4 gworldclock-1.1/m4/lib-ld.m4 --- gworldclock-1.1-orig/m4/lib-ld.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/lib-ld.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,110 @@ +# lib-ld.m4 serial 2 (gettext-0.12) +dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl Subroutines of libtool.m4, +dnl with replacements s/AC_/AC_LIB/ and s/lt_cv/acl_cv/ to avoid collision +dnl with libtool.m4. + +dnl From libtool-1.4. Sets the variable with_gnu_ld to yes or no. +AC_DEFUN([AC_LIB_PROG_LD_GNU], +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], acl_cv_prog_gnu_ld, +[# I'd rather use --version here, but apparently some GNU ld's only accept -v. +if $LD -v 2>&1 &5; then + acl_cv_prog_gnu_ld=yes +else + acl_cv_prog_gnu_ld=no +fi]) +with_gnu_ld=$acl_cv_prog_gnu_ld +]) + +dnl From libtool-1.4. Sets the variable LD. +AC_DEFUN([AC_LIB_PROG_LD], +[AC_ARG_WITH(gnu-ld, +[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], +test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by GCC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]* | [A-Za-z]:[\\/]*)] + [re_direlt='/[^/][^/]*/\.\./'] + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(acl_cv_path_LD, +[if test -z "$LD"; then + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + acl_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$acl_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + test "$with_gnu_ld" != no && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$ac_save_ifs" +else + acl_cv_path_LD="$LD" # Let the user override the test with a path. +fi]) +LD="$acl_cv_path_LD" +if test -n "$LD"; then + AC_MSG_RESULT($LD) +else + AC_MSG_RESULT(no) +fi +test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +AC_LIB_PROG_LD_GNU +]) diff -ruN gworldclock-1.1-orig/m4/lib-link.m4 gworldclock-1.1/m4/lib-link.m4 --- gworldclock-1.1-orig/m4/lib-link.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/lib-link.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,551 @@ +# lib-link.m4 serial 4 (gettext-0.12) +dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +dnl AC_LIB_LINKFLAGS(name [, dependencies]) searches for libname and +dnl the libraries corresponding to explicit and implicit dependencies. +dnl Sets and AC_SUBSTs the LIB${NAME} and LTLIB${NAME} variables and +dnl augments the CPPFLAGS variable. +AC_DEFUN([AC_LIB_LINKFLAGS], +[ + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + define([Name],[translit([$1],[./-], [___])]) + define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + AC_CACHE_CHECK([how to link with lib[]$1], [ac_cv_lib[]Name[]_libs], [ + AC_LIB_LINKFLAGS_BODY([$1], [$2]) + ac_cv_lib[]Name[]_libs="$LIB[]NAME" + ac_cv_lib[]Name[]_ltlibs="$LTLIB[]NAME" + ac_cv_lib[]Name[]_cppflags="$INC[]NAME" + ]) + LIB[]NAME="$ac_cv_lib[]Name[]_libs" + LTLIB[]NAME="$ac_cv_lib[]Name[]_ltlibs" + INC[]NAME="$ac_cv_lib[]Name[]_cppflags" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) + AC_SUBST([LIB]NAME) + AC_SUBST([LTLIB]NAME) + dnl Also set HAVE_LIB[]NAME so that AC_LIB_HAVE_LINKFLAGS can reuse the + dnl results of this search when this library appears as a dependency. + HAVE_LIB[]NAME=yes + undefine([Name]) + undefine([NAME]) +]) + +dnl AC_LIB_HAVE_LINKFLAGS(name, dependencies, includes, testcode) +dnl searches for libname and the libraries corresponding to explicit and +dnl implicit dependencies, together with the specified include files and +dnl the ability to compile and link the specified testcode. If found, it +dnl sets and AC_SUBSTs HAVE_LIB${NAME}=yes and the LIB${NAME} and +dnl LTLIB${NAME} variables and augments the CPPFLAGS variable, and +dnl #defines HAVE_LIB${NAME} to 1. Otherwise, it sets and AC_SUBSTs +dnl HAVE_LIB${NAME}=no and LIB${NAME} and LTLIB${NAME} to empty. +AC_DEFUN([AC_LIB_HAVE_LINKFLAGS], +[ + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + AC_REQUIRE([AC_LIB_RPATH]) + define([Name],[translit([$1],[./-], [___])]) + define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + + dnl Search for lib[]Name and define LIB[]NAME, LTLIB[]NAME and INC[]NAME + dnl accordingly. + AC_LIB_LINKFLAGS_BODY([$1], [$2]) + + dnl Add $INC[]NAME to CPPFLAGS before performing the following checks, + dnl because if the user has installed lib[]Name and not disabled its use + dnl via --without-lib[]Name-prefix, he wants to use it. + ac_save_CPPFLAGS="$CPPFLAGS" + AC_LIB_APPENDTOVAR([CPPFLAGS], [$INC]NAME) + + AC_CACHE_CHECK([for lib[]$1], [ac_cv_lib[]Name], [ + ac_save_LIBS="$LIBS" + LIBS="$LIBS $LIB[]NAME" + AC_TRY_LINK([$3], [$4], [ac_cv_lib[]Name=yes], [ac_cv_lib[]Name=no]) + LIBS="$ac_save_LIBS" + ]) + if test "$ac_cv_lib[]Name" = yes; then + HAVE_LIB[]NAME=yes + AC_DEFINE([HAVE_LIB]NAME, 1, [Define if you have the $1 library.]) + AC_MSG_CHECKING([how to link with lib[]$1]) + AC_MSG_RESULT([$LIB[]NAME]) + else + HAVE_LIB[]NAME=no + dnl If $LIB[]NAME didn't lead to a usable library, we don't need + dnl $INC[]NAME either. + CPPFLAGS="$ac_save_CPPFLAGS" + LIB[]NAME= + LTLIB[]NAME= + fi + AC_SUBST([HAVE_LIB]NAME) + AC_SUBST([LIB]NAME) + AC_SUBST([LTLIB]NAME) + undefine([Name]) + undefine([NAME]) +]) + +dnl Determine the platform dependent parameters needed to use rpath: +dnl libext, shlibext, hardcode_libdir_flag_spec, hardcode_libdir_separator, +dnl hardcode_direct, hardcode_minus_L. +AC_DEFUN([AC_LIB_RPATH], +[ + AC_REQUIRE([AC_PROG_CC]) dnl we use $CC, $GCC, $LDFLAGS + AC_REQUIRE([AC_LIB_PROG_LD]) dnl we use $LD, $with_gnu_ld + AC_REQUIRE([AC_CANONICAL_HOST]) dnl we use $host + AC_REQUIRE([AC_CONFIG_AUX_DIR_DEFAULT]) dnl we use $ac_aux_dir + AC_CACHE_CHECK([for shared library run path origin], acl_cv_rpath, [ + CC="$CC" GCC="$GCC" LDFLAGS="$LDFLAGS" LD="$LD" with_gnu_ld="$with_gnu_ld" \ + ${CONFIG_SHELL-/bin/sh} "$ac_aux_dir/config.rpath" "$host" > conftest.sh + . ./conftest.sh + rm -f ./conftest.sh + acl_cv_rpath=done + ]) + wl="$acl_cv_wl" + libext="$acl_cv_libext" + shlibext="$acl_cv_shlibext" + hardcode_libdir_flag_spec="$acl_cv_hardcode_libdir_flag_spec" + hardcode_libdir_separator="$acl_cv_hardcode_libdir_separator" + hardcode_direct="$acl_cv_hardcode_direct" + hardcode_minus_L="$acl_cv_hardcode_minus_L" + dnl Determine whether the user wants rpath handling at all. + AC_ARG_ENABLE(rpath, + [ --disable-rpath do not hardcode runtime library paths], + :, enable_rpath=yes) +]) + +dnl AC_LIB_LINKFLAGS_BODY(name [, dependencies]) searches for libname and +dnl the libraries corresponding to explicit and implicit dependencies. +dnl Sets the LIB${NAME}, LTLIB${NAME} and INC${NAME} variables. +AC_DEFUN([AC_LIB_LINKFLAGS_BODY], +[ + define([NAME],[translit([$1],[abcdefghijklmnopqrstuvwxyz./-], + [ABCDEFGHIJKLMNOPQRSTUVWXYZ___])]) + dnl By default, look in $includedir and $libdir. + use_additional=yes + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + AC_LIB_ARG_WITH([lib$1-prefix], +[ --with-lib$1-prefix[=DIR] search for lib$1 in DIR/include and DIR/lib + --without-lib$1-prefix don't search for lib$1 in includedir and libdir], +[ + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + else + additional_includedir="$withval/include" + additional_libdir="$withval/lib" + fi + fi +]) + dnl Search the library and its dependencies in $additional_libdir and + dnl $LDFLAGS. Using breadth-first-seach. + LIB[]NAME= + LTLIB[]NAME= + INC[]NAME= + rpathdirs= + ltrpathdirs= + names_already_handled= + names_next_round='$1 $2' + while test -n "$names_next_round"; do + names_this_round="$names_next_round" + names_next_round= + for name in $names_this_round; do + already_handled= + for n in $names_already_handled; do + if test "$n" = "$name"; then + already_handled=yes + break + fi + done + if test -z "$already_handled"; then + names_already_handled="$names_already_handled $name" + dnl See if it was already located by an earlier AC_LIB_LINKFLAGS + dnl or AC_LIB_HAVE_LINKFLAGS call. + uppername=`echo "$name" | sed -e 'y|abcdefghijklmnopqrstuvwxyz./-|ABCDEFGHIJKLMNOPQRSTUVWXYZ___|'` + eval value=\"\$HAVE_LIB$uppername\" + if test -n "$value"; then + if test "$value" = yes; then + eval value=\"\$LIB$uppername\" + test -z "$value" || LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$value" + eval value=\"\$LTLIB$uppername\" + test -z "$value" || LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$value" + else + dnl An earlier call to AC_LIB_HAVE_LINKFLAGS has determined + dnl that this library doesn't exist. So just drop it. + : + fi + else + dnl Search the library lib$name in $additional_libdir and $LDFLAGS + dnl and the already constructed $LIBNAME/$LTLIBNAME. + found_dir= + found_la= + found_so= + found_a= + if test $use_additional = yes; then + if test -n "$shlibext" && test -f "$additional_libdir/lib$name.$shlibext"; then + found_dir="$additional_libdir" + found_so="$additional_libdir/lib$name.$shlibext" + if test -f "$additional_libdir/lib$name.la"; then + found_la="$additional_libdir/lib$name.la" + fi + else + if test -f "$additional_libdir/lib$name.$libext"; then + found_dir="$additional_libdir" + found_a="$additional_libdir/lib$name.$libext" + if test -f "$additional_libdir/lib$name.la"; then + found_la="$additional_libdir/lib$name.la" + fi + fi + fi + fi + if test "X$found_dir" = "X"; then + for x in $LDFLAGS $LTLIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + case "$x" in + -L*) + dir=`echo "X$x" | sed -e 's/^X-L//'` + if test -n "$shlibext" && test -f "$dir/lib$name.$shlibext"; then + found_dir="$dir" + found_so="$dir/lib$name.$shlibext" + if test -f "$dir/lib$name.la"; then + found_la="$dir/lib$name.la" + fi + else + if test -f "$dir/lib$name.$libext"; then + found_dir="$dir" + found_a="$dir/lib$name.$libext" + if test -f "$dir/lib$name.la"; then + found_la="$dir/lib$name.la" + fi + fi + fi + ;; + esac + if test "X$found_dir" != "X"; then + break + fi + done + fi + if test "X$found_dir" != "X"; then + dnl Found the library. + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$found_dir -l$name" + if test "X$found_so" != "X"; then + dnl Linking with a shared library. We attempt to hardcode its + dnl directory into the executable's runpath, unless it's the + dnl standard /usr/lib. + if test "$enable_rpath" = no || test "X$found_dir" = "X/usr/lib"; then + dnl No hardcoding is needed. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + dnl Use an explicit option to hardcode DIR into the resulting + dnl binary. + dnl Potentially add DIR to ltrpathdirs. + dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $found_dir" + fi + dnl The hardcoding into $LIBNAME is system dependent. + if test "$hardcode_direct" = yes; then + dnl Using DIR/libNAME.so during linking hardcodes DIR into the + dnl resulting binary. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + if test -n "$hardcode_libdir_flag_spec" && test "$hardcode_minus_L" = no; then + dnl Use an explicit option to hardcode DIR into the resulting + dnl binary. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + dnl Potentially add DIR to rpathdirs. + dnl The rpathdirs will be appended to $LIBNAME at the end. + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $found_dir" + fi + else + dnl Rely on "-L$found_dir". + dnl But don't add it if it's already contained in the LDFLAGS + dnl or the already constructed $LIBNAME + haveit= + for x in $LDFLAGS $LIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$found_dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir" + fi + if test "$hardcode_minus_L" != no; then + dnl FIXME: Not sure whether we should use + dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" + dnl here. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_so" + else + dnl We cannot use $hardcode_runpath_var and LD_RUN_PATH + dnl here, because this doesn't fit in flags passed to the + dnl compiler. So give up. No hardcoding. This affects only + dnl very old systems. + dnl FIXME: Not sure whether we should use + dnl "-L$found_dir -l$name" or "-L$found_dir $found_so" + dnl here. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" + fi + fi + fi + fi + else + if test "X$found_a" != "X"; then + dnl Linking with a static library. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$found_a" + else + dnl We shouldn't come here, but anyway it's good to have a + dnl fallback. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$found_dir -l$name" + fi + fi + dnl Assume the include files are nearby. + additional_includedir= + case "$found_dir" in + */lib | */lib/) + basedir=`echo "X$found_dir" | sed -e 's,^X,,' -e 's,/lib/*$,,'` + additional_includedir="$basedir/include" + ;; + esac + if test "X$additional_includedir" != "X"; then + dnl Potentially add $additional_includedir to $INCNAME. + dnl But don't add it + dnl 1. if it's the standard /usr/include, + dnl 2. if it's /usr/local/include and we are using GCC on Linux, + dnl 3. if it's already present in $CPPFLAGS or the already + dnl constructed $INCNAME, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + for x in $CPPFLAGS $INC[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + dnl Really add $additional_includedir to $INCNAME. + INC[]NAME="${INC[]NAME}${INC[]NAME:+ }-I$additional_includedir" + fi + fi + fi + fi + fi + dnl Look for dependencies. + if test -n "$found_la"; then + dnl Read the .la file. It defines the variables + dnl dlname, library_names, old_library, dependency_libs, current, + dnl age, revision, installed, dlopen, dlpreopen, libdir. + save_libdir="$libdir" + case "$found_la" in + */* | *\\*) . "$found_la" ;; + *) . "./$found_la" ;; + esac + libdir="$save_libdir" + dnl We use only dependency_libs. + for dep in $dependency_libs; do + case "$dep" in + -L*) + additional_libdir=`echo "X$dep" | sed -e 's/^X-L//'` + dnl Potentially add $additional_libdir to $LIBNAME and $LTLIBNAME. + dnl But don't add it + dnl 1. if it's the standard /usr/lib, + dnl 2. if it's /usr/local/lib and we are using GCC on Linux, + dnl 3. if it's already present in $LDFLAGS or the already + dnl constructed $LIBNAME, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_libdir" != "X/usr/lib"; then + haveit= + if test "X$additional_libdir" = "X/usr/local/lib"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + haveit= + for x in $LDFLAGS $LIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LIBNAME. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-L$additional_libdir" + fi + fi + haveit= + for x in $LDFLAGS $LTLIB[]NAME; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LTLIBNAME. + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-L$additional_libdir" + fi + fi + fi + fi + ;; + -R*) + dir=`echo "X$dep" | sed -e 's/^X-R//'` + if test "$enable_rpath" != no; then + dnl Potentially add DIR to rpathdirs. + dnl The rpathdirs will be appended to $LIBNAME at the end. + haveit= + for x in $rpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + rpathdirs="$rpathdirs $dir" + fi + dnl Potentially add DIR to ltrpathdirs. + dnl The ltrpathdirs will be appended to $LTLIBNAME at the end. + haveit= + for x in $ltrpathdirs; do + if test "X$x" = "X$dir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + ltrpathdirs="$ltrpathdirs $dir" + fi + fi + ;; + -l*) + dnl Handle this in the next round. + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's/^X-l//'` + ;; + *.la) + dnl Handle this in the next round. Throw away the .la's + dnl directory; it is already contained in a preceding -L + dnl option. + names_next_round="$names_next_round "`echo "X$dep" | sed -e 's,^X.*/,,' -e 's,^lib,,' -e 's,\.la$,,'` + ;; + *) + dnl Most likely an immediate library name. + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$dep" + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }$dep" + ;; + esac + done + fi + else + dnl Didn't find the library; assume it is in the system directories + dnl known to the linker and runtime loader. (All the system + dnl directories known to the linker should also be known to the + dnl runtime loader, otherwise the system is severely misconfigured.) + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }-l$name" + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-l$name" + fi + fi + fi + done + done + if test "X$rpathdirs" != "X"; then + if test -n "$hardcode_libdir_separator"; then + dnl Weird platform: only the last -rpath option counts, the user must + dnl pass all path elements in one option. We can arrange that for a + dnl single library, but not when more than one $LIBNAMEs are used. + alldirs= + for found_dir in $rpathdirs; do + alldirs="${alldirs}${alldirs:+$hardcode_libdir_separator}$found_dir" + done + dnl Note: hardcode_libdir_flag_spec uses $libdir and $wl. + acl_save_libdir="$libdir" + libdir="$alldirs" + eval flag=\"$hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" + else + dnl The -rpath options are cumulative. + for found_dir in $rpathdirs; do + acl_save_libdir="$libdir" + libdir="$found_dir" + eval flag=\"$hardcode_libdir_flag_spec\" + libdir="$acl_save_libdir" + LIB[]NAME="${LIB[]NAME}${LIB[]NAME:+ }$flag" + done + fi + fi + if test "X$ltrpathdirs" != "X"; then + dnl When using libtool, the option that works for both libraries and + dnl executables is -R. The -R options are cumulative. + for found_dir in $ltrpathdirs; do + LTLIB[]NAME="${LTLIB[]NAME}${LTLIB[]NAME:+ }-R$found_dir" + done + fi +]) + +dnl AC_LIB_APPENDTOVAR(VAR, CONTENTS) appends the elements of CONTENTS to VAR, +dnl unless already present in VAR. +dnl Works only for CPPFLAGS, not for LIB* variables because that sometimes +dnl contains two or three consecutive elements that belong together. +AC_DEFUN([AC_LIB_APPENDTOVAR], +[ + for element in [$2]; do + haveit= + for x in $[$1]; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X$element"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + [$1]="${[$1]}${[$1]:+ }$element" + fi + done +]) diff -ruN gworldclock-1.1-orig/m4/lib-prefix.m4 gworldclock-1.1/m4/lib-prefix.m4 --- gworldclock-1.1-orig/m4/lib-prefix.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/lib-prefix.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,155 @@ +# lib-prefix.m4 serial 3 (gettext-0.12.2) +dnl Copyright (C) 2001-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Bruno Haible. + +dnl AC_LIB_ARG_WITH is synonymous to AC_ARG_WITH in autoconf-2.13, and +dnl similar to AC_ARG_WITH in autoconf 2.52...2.57 except that is doesn't +dnl require excessive bracketing. +ifdef([AC_HELP_STRING], +[AC_DEFUN([AC_LIB_ARG_WITH], [AC_ARG_WITH([$1],[[$2]],[$3],[$4])])], +[AC_DEFUN([AC_][LIB_ARG_WITH], [AC_ARG_WITH([$1],[$2],[$3],[$4])])]) + +dnl AC_LIB_PREFIX adds to the CPPFLAGS and LDFLAGS the flags that are needed +dnl to access previously installed libraries. The basic assumption is that +dnl a user will want packages to use other packages he previously installed +dnl with the same --prefix option. +dnl This macro is not needed if only AC_LIB_LINKFLAGS is used to locate +dnl libraries, but is otherwise very convenient. +AC_DEFUN([AC_LIB_PREFIX], +[ + AC_BEFORE([$0], [AC_LIB_LINKFLAGS]) + AC_REQUIRE([AC_PROG_CC]) + AC_REQUIRE([AC_CANONICAL_HOST]) + AC_REQUIRE([AC_LIB_PREPARE_PREFIX]) + dnl By default, look in $includedir and $libdir. + use_additional=yes + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + AC_LIB_ARG_WITH([lib-prefix], +[ --with-lib-prefix[=DIR] search for libraries in DIR/include and DIR/lib + --without-lib-prefix don't search for libraries in includedir and libdir], +[ + if test "X$withval" = "Xno"; then + use_additional=no + else + if test "X$withval" = "X"; then + AC_LIB_WITH_FINAL_PREFIX([ + eval additional_includedir=\"$includedir\" + eval additional_libdir=\"$libdir\" + ]) + else + additional_includedir="$withval/include" + additional_libdir="$withval/lib" + fi + fi +]) + if test $use_additional = yes; then + dnl Potentially add $additional_includedir to $CPPFLAGS. + dnl But don't add it + dnl 1. if it's the standard /usr/include, + dnl 2. if it's already present in $CPPFLAGS, + dnl 3. if it's /usr/local/include and we are using GCC on Linux, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_includedir" != "X/usr/include"; then + haveit= + for x in $CPPFLAGS; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-I$additional_includedir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test "X$additional_includedir" = "X/usr/local/include"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + if test -d "$additional_includedir"; then + dnl Really add $additional_includedir to $CPPFLAGS. + CPPFLAGS="${CPPFLAGS}${CPPFLAGS:+ }-I$additional_includedir" + fi + fi + fi + fi + dnl Potentially add $additional_libdir to $LDFLAGS. + dnl But don't add it + dnl 1. if it's the standard /usr/lib, + dnl 2. if it's already present in $LDFLAGS, + dnl 3. if it's /usr/local/lib and we are using GCC on Linux, + dnl 4. if it doesn't exist as a directory. + if test "X$additional_libdir" != "X/usr/lib"; then + haveit= + for x in $LDFLAGS; do + AC_LIB_WITH_FINAL_PREFIX([eval x=\"$x\"]) + if test "X$x" = "X-L$additional_libdir"; then + haveit=yes + break + fi + done + if test -z "$haveit"; then + if test "X$additional_libdir" = "X/usr/local/lib"; then + if test -n "$GCC"; then + case $host_os in + linux*) haveit=yes;; + esac + fi + fi + if test -z "$haveit"; then + if test -d "$additional_libdir"; then + dnl Really add $additional_libdir to $LDFLAGS. + LDFLAGS="${LDFLAGS}${LDFLAGS:+ }-L$additional_libdir" + fi + fi + fi + fi + fi +]) + +dnl AC_LIB_PREPARE_PREFIX creates variables acl_final_prefix, +dnl acl_final_exec_prefix, containing the values to which $prefix and +dnl $exec_prefix will expand at the end of the configure script. +AC_DEFUN([AC_LIB_PREPARE_PREFIX], +[ + dnl Unfortunately, prefix and exec_prefix get only finally determined + dnl at the end of configure. + if test "X$prefix" = "XNONE"; then + acl_final_prefix="$ac_default_prefix" + else + acl_final_prefix="$prefix" + fi + if test "X$exec_prefix" = "XNONE"; then + acl_final_exec_prefix='${prefix}' + else + acl_final_exec_prefix="$exec_prefix" + fi + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + eval acl_final_exec_prefix=\"$acl_final_exec_prefix\" + prefix="$acl_save_prefix" +]) + +dnl AC_LIB_WITH_FINAL_PREFIX([statement]) evaluates statement, with the +dnl variables prefix and exec_prefix bound to the values they will have +dnl at the end of the configure script. +AC_DEFUN([AC_LIB_WITH_FINAL_PREFIX], +[ + acl_save_prefix="$prefix" + prefix="$acl_final_prefix" + acl_save_exec_prefix="$exec_prefix" + exec_prefix="$acl_final_exec_prefix" + $1 + exec_prefix="$acl_save_exec_prefix" + prefix="$acl_save_prefix" +]) diff -ruN gworldclock-1.1-orig/m4/nls.m4 gworldclock-1.1/m4/nls.m4 --- gworldclock-1.1-orig/m4/nls.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/nls.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,49 @@ +# nls.m4 serial 1 (gettext-0.12) +dnl Copyright (C) 1995-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995-2000. +dnl Bruno Haible , 2000-2003. + +AC_DEFUN([AM_NLS], +[ + AC_MSG_CHECKING([whether NLS is requested]) + dnl Default is enabled NLS + AC_ARG_ENABLE(nls, + [ --disable-nls do not use Native Language Support], + USE_NLS=$enableval, USE_NLS=yes) + AC_MSG_RESULT($USE_NLS) + AC_SUBST(USE_NLS) +]) + +AC_DEFUN([AM_MKINSTALLDIRS], +[ + dnl If the AC_CONFIG_AUX_DIR macro for autoconf is used we possibly + dnl find the mkinstalldirs script in another subdir but $(top_srcdir). + dnl Try to locate it. + MKINSTALLDIRS= + if test -n "$ac_aux_dir"; then + case "$ac_aux_dir" in + /*) MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" ;; + *) MKINSTALLDIRS="\$(top_builddir)/$ac_aux_dir/mkinstalldirs" ;; + esac + fi + if test -z "$MKINSTALLDIRS"; then + MKINSTALLDIRS="\$(top_srcdir)/mkinstalldirs" + fi + AC_SUBST(MKINSTALLDIRS) +]) diff -ruN gworldclock-1.1-orig/m4/po.m4 gworldclock-1.1/m4/po.m4 --- gworldclock-1.1-orig/m4/po.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/po.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,197 @@ +# po.m4 serial 1 (gettext-0.12) +dnl Copyright (C) 1995-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1995-2000. +dnl Bruno Haible , 2000-2003. + +dnl Checks for all prerequisites of the po subdirectory. +AC_DEFUN([AM_PO_SUBDIRS], +[ + AC_REQUIRE([AC_PROG_MAKE_SET])dnl + AC_REQUIRE([AC_PROG_INSTALL])dnl + AC_REQUIRE([AM_MKINSTALLDIRS])dnl + AC_REQUIRE([AM_NLS])dnl + + dnl Perform the following tests also if --disable-nls has been given, + dnl because they are needed for "make dist" to work. + + dnl Search for GNU msgfmt in the PATH. + dnl The first test excludes Solaris msgfmt and early GNU msgfmt versions. + dnl The second test excludes FreeBSD msgfmt. + AM_PATH_PROG_WITH_TEST(MSGFMT, msgfmt, + [$ac_dir/$ac_word --statistics /dev/null >/dev/null 2>&1 && + (if $ac_dir/$ac_word --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], + :) + AC_PATH_PROG(GMSGFMT, gmsgfmt, $MSGFMT) + + dnl Search for GNU xgettext 0.12 or newer in the PATH. + dnl The first test excludes Solaris xgettext and early GNU xgettext versions. + dnl The second test excludes FreeBSD xgettext. + AM_PATH_PROG_WITH_TEST(XGETTEXT, xgettext, + [$ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && + (if $ac_dir/$ac_word --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi)], + :) + dnl Remove leftover from FreeBSD xgettext call. + rm -f messages.po + + dnl Search for GNU msgmerge 0.11 or newer in the PATH. + AM_PATH_PROG_WITH_TEST(MSGMERGE, msgmerge, + [$ac_dir/$ac_word --update -q /dev/null /dev/null >/dev/null 2>&1], :) + + dnl This could go away some day; the PATH_PROG_WITH_TEST already does it. + dnl Test whether we really found GNU msgfmt. + if test "$GMSGFMT" != ":"; then + dnl If it is no GNU msgfmt we define it as : so that the + dnl Makefiles still can work. + if $GMSGFMT --statistics /dev/null >/dev/null 2>&1 && + (if $GMSGFMT --statistics /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + : ; + else + GMSGFMT=`echo "$GMSGFMT" | sed -e 's,^.*/,,'` + AC_MSG_RESULT( + [found $GMSGFMT program is not GNU msgfmt; ignore it]) + GMSGFMT=":" + fi + fi + + dnl This could go away some day; the PATH_PROG_WITH_TEST already does it. + dnl Test whether we really found GNU xgettext. + if test "$XGETTEXT" != ":"; then + dnl If it is no GNU xgettext we define it as : so that the + dnl Makefiles still can work. + if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null >/dev/null 2>&1 && + (if $XGETTEXT --omit-header --copyright-holder= --msgid-bugs-address= /dev/null 2>&1 >/dev/null | grep usage >/dev/null; then exit 1; else exit 0; fi); then + : ; + else + AC_MSG_RESULT( + [found xgettext program is not GNU xgettext; ignore it]) + XGETTEXT=":" + fi + dnl Remove leftover from FreeBSD xgettext call. + rm -f messages.po + fi + + AC_OUTPUT_COMMANDS([ + for ac_file in $CONFIG_FILES; do + # Support "outfile[:infile[:infile...]]" + case "$ac_file" in + *:*) ac_file=`echo "$ac_file"|sed 's%:.*%%'` ;; + esac + # PO directories have a Makefile.in generated from Makefile.in.in. + case "$ac_file" in */Makefile.in) + # Adjust a relative srcdir. + ac_dir=`echo "$ac_file"|sed 's%/[^/][^/]*$%%'` + ac_dir_suffix="/`echo "$ac_dir"|sed 's%^\./%%'`" + ac_dots=`echo "$ac_dir_suffix"|sed 's%/[^/]*%../%g'` + # In autoconf-2.13 it is called $ac_given_srcdir. + # In autoconf-2.50 it is called $srcdir. + test -n "$ac_given_srcdir" || ac_given_srcdir="$srcdir" + case "$ac_given_srcdir" in + .) top_srcdir=`echo $ac_dots|sed 's%/$%%'` ;; + /*) top_srcdir="$ac_given_srcdir" ;; + *) top_srcdir="$ac_dots$ac_given_srcdir" ;; + esac + if test -f "$ac_given_srcdir/$ac_dir/POTFILES.in"; then + rm -f "$ac_dir/POTFILES" + test -n "$as_me" && echo "$as_me: creating $ac_dir/POTFILES" || echo "creating $ac_dir/POTFILES" + cat "$ac_given_srcdir/$ac_dir/POTFILES.in" | sed -e "/^#/d" -e "/^[ ]*\$/d" -e "s,.*, $top_srcdir/& \\\\," | sed -e "\$s/\(.*\) \\\\/\1/" > "$ac_dir/POTFILES" + POMAKEFILEDEPS="POTFILES.in" + # ALL_LINGUAS, POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES depend + # on $ac_dir but don't depend on user-specified configuration + # parameters. + if test -f "$ac_given_srcdir/$ac_dir/LINGUAS"; then + # The LINGUAS file contains the set of available languages. + if test -n "$OBSOLETE_ALL_LINGUAS"; then + test -n "$as_me" && echo "$as_me: setting ALL_LINGUAS in configure.in is obsolete" || echo "setting ALL_LINGUAS in configure.in is obsolete" + fi + ALL_LINGUAS_=`sed -e "/^#/d" "$ac_given_srcdir/$ac_dir/LINGUAS"` + # Hide the ALL_LINGUAS assigment from automake. + eval 'ALL_LINGUAS''=$ALL_LINGUAS_' + POMAKEFILEDEPS="$POMAKEFILEDEPS LINGUAS" + else + # The set of available languages was given in configure.in. + eval 'ALL_LINGUAS''=$OBSOLETE_ALL_LINGUAS' + fi + case "$ac_given_srcdir" in + .) srcdirpre= ;; + *) srcdirpre='$(srcdir)/' ;; + esac + POFILES= + GMOFILES= + UPDATEPOFILES= + DUMMYPOFILES= + for lang in $ALL_LINGUAS; do + POFILES="$POFILES $srcdirpre$lang.po" + GMOFILES="$GMOFILES $srcdirpre$lang.gmo" + UPDATEPOFILES="$UPDATEPOFILES $lang.po-update" + DUMMYPOFILES="$DUMMYPOFILES $lang.nop" + done + # CATALOGS depends on both $ac_dir and the user's LINGUAS + # environment variable. + INST_LINGUAS= + if test -n "$ALL_LINGUAS"; then + for presentlang in $ALL_LINGUAS; do + useit=no + if test "%UNSET%" != "$LINGUAS"; then + desiredlanguages="$LINGUAS" + else + desiredlanguages="$ALL_LINGUAS" + fi + for desiredlang in $desiredlanguages; do + # Use the presentlang catalog if desiredlang is + # a. equal to presentlang, or + # b. a variant of presentlang (because in this case, + # presentlang can be used as a fallback for messages + # which are not translated in the desiredlang catalog). + case "$desiredlang" in + "$presentlang"*) useit=yes;; + esac + done + if test $useit = yes; then + INST_LINGUAS="$INST_LINGUAS $presentlang" + fi + done + fi + CATALOGS= + if test -n "$INST_LINGUAS"; then + for lang in $INST_LINGUAS; do + CATALOGS="$CATALOGS $lang.gmo" + done + fi + test -n "$as_me" && echo "$as_me: creating $ac_dir/Makefile" || echo "creating $ac_dir/Makefile" + sed -e "/^POTFILES =/r $ac_dir/POTFILES" -e "/^# Makevars/r $ac_given_srcdir/$ac_dir/Makevars" -e "s|@POFILES@|$POFILES|g" -e "s|@GMOFILES@|$GMOFILES|g" -e "s|@UPDATEPOFILES@|$UPDATEPOFILES|g" -e "s|@DUMMYPOFILES@|$DUMMYPOFILES|g" -e "s|@CATALOGS@|$CATALOGS|g" -e "s|@POMAKEFILEDEPS@|$POMAKEFILEDEPS|g" "$ac_dir/Makefile.in" > "$ac_dir/Makefile" + for f in "$ac_given_srcdir/$ac_dir"/Rules-*; do + if test -f "$f"; then + case "$f" in + *.orig | *.bak | *~) ;; + *) cat "$f" >> "$ac_dir/Makefile" ;; + esac + fi + done + fi + ;; + esac + done], + [# Capture the value of obsolete ALL_LINGUAS because we need it to compute + # POFILES, GMOFILES, UPDATEPOFILES, DUMMYPOFILES, CATALOGS. But hide it + # from automake. + eval 'OBSOLETE_ALL_LINGUAS''="$ALL_LINGUAS"' + # Capture the value of LINGUAS because we need it to compute CATALOGS. + LINGUAS="${LINGUAS-%UNSET%}" + ]) +]) diff -ruN gworldclock-1.1-orig/m4/progtest.m4 gworldclock-1.1/m4/progtest.m4 --- gworldclock-1.1-orig/m4/progtest.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/progtest.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,91 @@ +# progtest.m4 serial 3 (gettext-0.12) +dnl Copyright (C) 1996-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. +dnl +dnl This file can can be used in projects which are not available under +dnl the GNU General Public License or the GNU Library General Public +dnl License but which still want to provide support for the GNU gettext +dnl functionality. +dnl Please note that the actual code of the GNU gettext library is covered +dnl by the GNU Library General Public License, and the rest of the GNU +dnl gettext package package is covered by the GNU General Public License. +dnl They are *not* in the public domain. + +dnl Authors: +dnl Ulrich Drepper , 1996. + +# Search path for a program which passes the given test. + +dnl AM_PATH_PROG_WITH_TEST(VARIABLE, PROG-TO-CHECK-FOR, +dnl TEST-PERFORMED-ON-FOUND_PROGRAM [, VALUE-IF-NOT-FOUND [, PATH]]) +AC_DEFUN([AM_PATH_PROG_WITH_TEST], +[ +# Prepare PATH_SEPARATOR. +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + echo "#! /bin/sh" >conf$$.sh + echo "exit 0" >>conf$$.sh + chmod +x conf$$.sh + if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then + PATH_SEPARATOR=';' + else + PATH_SEPARATOR=: + fi + rm -f conf$$.sh +fi + +# Find out how to test for executable files. Don't use a zero-byte file, +# as systems may use methods other than mode bits to determine executability. +cat >conf$$.file <<_ASEOF +#! /bin/sh +exit 0 +_ASEOF +chmod +x conf$$.file +if test -x conf$$.file >/dev/null 2>&1; then + ac_executable_p="test -x" +else + ac_executable_p="test -f" +fi +rm -f conf$$.file + +# Extract the first word of "$2", so it can be a program name with args. +set dummy $2; ac_word=[$]2 +AC_MSG_CHECKING([for $ac_word]) +AC_CACHE_VAL(ac_cv_path_$1, +[case "[$]$1" in + [[\\/]]* | ?:[[\\/]]*) + ac_cv_path_$1="[$]$1" # Let the user override the test with a path. + ;; + *) + ac_save_IFS="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in ifelse([$5], , $PATH, [$5]); do + IFS="$ac_save_IFS" + test -z "$ac_dir" && ac_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if $ac_executable_p "$ac_dir/$ac_word$ac_exec_ext"; then + if [$3]; then + ac_cv_path_$1="$ac_dir/$ac_word$ac_exec_ext" + break 2 + fi + fi + done + done + IFS="$ac_save_IFS" +dnl If no 4th arg is given, leave the cache variable unset, +dnl so AC_PATH_PROGS will keep looking. +ifelse([$4], , , [ test -z "[$]ac_cv_path_$1" && ac_cv_path_$1="$4" +])dnl + ;; +esac])dnl +$1="$ac_cv_path_$1" +if test ifelse([$4], , [-n "[$]$1"], ["[$]$1" != "$4"]); then + AC_MSG_RESULT([$]$1) +else + AC_MSG_RESULT(no) +fi +AC_SUBST($1)dnl +]) diff -ruN gworldclock-1.1-orig/m4/stdint_h.m4 gworldclock-1.1/m4/stdint_h.m4 --- gworldclock-1.1-orig/m4/stdint_h.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/stdint_h.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,28 @@ +# stdint_h.m4 serial 3 (gettext-0.12) +dnl Copyright (C) 1997-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Paul Eggert. + +# Define HAVE_STDINT_H_WITH_UINTMAX if exists, +# doesn't clash with , and declares uintmax_t. + +AC_DEFUN([jm_AC_HEADER_STDINT_H], +[ + AC_CACHE_CHECK([for stdint.h], jm_ac_cv_header_stdint_h, + [AC_TRY_COMPILE( + [#include +#include ], + [uintmax_t i = (uintmax_t) -1;], + jm_ac_cv_header_stdint_h=yes, + jm_ac_cv_header_stdint_h=no)]) + if test $jm_ac_cv_header_stdint_h = yes; then + AC_DEFINE_UNQUOTED(HAVE_STDINT_H_WITH_UINTMAX, 1, + [Define if exists, doesn't clash with , + and declares uintmax_t. ]) + fi +]) diff -ruN gworldclock-1.1-orig/m4/uintmax_t.m4 gworldclock-1.1/m4/uintmax_t.m4 --- gworldclock-1.1-orig/m4/uintmax_t.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/uintmax_t.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,32 @@ +# uintmax_t.m4 serial 7 (gettext-0.12) +dnl Copyright (C) 1997-2003 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Paul Eggert. + +AC_PREREQ(2.13) + +# Define uintmax_t to 'unsigned long' or 'unsigned long long' +# if it is not already defined in or . + +AC_DEFUN([jm_AC_TYPE_UINTMAX_T], +[ + AC_REQUIRE([jm_AC_HEADER_INTTYPES_H]) + AC_REQUIRE([jm_AC_HEADER_STDINT_H]) + if test $jm_ac_cv_header_inttypes_h = no && test $jm_ac_cv_header_stdint_h = no; then + AC_REQUIRE([jm_AC_TYPE_UNSIGNED_LONG_LONG]) + test $ac_cv_type_unsigned_long_long = yes \ + && ac_type='unsigned long long' \ + || ac_type='unsigned long' + AC_DEFINE_UNQUOTED(uintmax_t, $ac_type, + [Define to unsigned long or unsigned long long + if and don't define.]) + else + AC_DEFINE(HAVE_UINTMAX_T, 1, + [Define if you have the 'uintmax_t' type in or .]) + fi +]) diff -ruN gworldclock-1.1-orig/m4/ulonglong.m4 gworldclock-1.1/m4/ulonglong.m4 --- gworldclock-1.1-orig/m4/ulonglong.m4 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/m4/ulonglong.m4 2003-07-26 12:48:04.000000000 +0900 @@ -0,0 +1,23 @@ +# ulonglong.m4 serial 2 (fileutils-4.0.32, gettext-0.10.40) +dnl Copyright (C) 1999-2002 Free Software Foundation, Inc. +dnl This file is free software, distributed under the terms of the GNU +dnl General Public License. As a special exception to the GNU General +dnl Public License, this file may be distributed as part of a program +dnl that contains a configuration script generated by Autoconf, under +dnl the same distribution terms as the rest of that program. + +dnl From Paul Eggert. + +AC_DEFUN([jm_AC_TYPE_UNSIGNED_LONG_LONG], +[ + AC_CACHE_CHECK([for unsigned long long], ac_cv_type_unsigned_long_long, + [AC_TRY_LINK([unsigned long long ull = 1; int i = 63;], + [unsigned long long ullmax = (unsigned long long) -1; + return ull << i | ull >> i | ullmax / ull | ullmax % ull;], + ac_cv_type_unsigned_long_long=yes, + ac_cv_type_unsigned_long_long=no)]) + if test $ac_cv_type_unsigned_long_long = yes; then + AC_DEFINE(HAVE_UNSIGNED_LONG_LONG, 1, + [Define if you have the unsigned long long type.]) + fi +]) diff -ruN gworldclock-1.1-orig/main.c gworldclock-1.1/main.c --- gworldclock-1.1-orig/main.c 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/main.c 2003-07-26 16:22:35.000000000 +0900 @@ -61,6 +61,9 @@ #include /* getopt */ #include #include +#include +#include +#define _(A) gettext(A) #include "main.h" #include "zones.h" @@ -99,6 +102,16 @@ } } +const gchar* +translate_func (const gchar * s, gpointer * v) +{ + /* + translation function used for itemfactory + added by dancerj, Junichi Uekawa, 26 Jul 2003. + */ + return gettext(s); +} + void get_main_menu( GtkWidget *window, GtkWidget **menubar, gpointer clocklist) @@ -111,6 +124,7 @@ accel_group = gtk_accel_group_new (); item_factory = gtk_item_factory_new (GTK_TYPE_MENU_BAR, "
", accel_group); + gtk_item_factory_set_translate_func (item_factory, translate_func, NULL, NULL); gtk_item_factory_create_items (item_factory, nmenu_items, mainmenu_items, clocklist); gtk_window_add_accel_group (GTK_WINDOW (window), accel_group); @@ -128,7 +142,7 @@ /* at some point in the future strings like these will have to be reorganised to allow for internationalisation */ - title = g_string_new("About gworldclock"); + title = g_string_new(_("About gworldclock")); about = g_string_new( "\n gworldclock\n"); #ifdef PACKAGE_VERSION g_string_append(about, " v "); @@ -299,6 +313,7 @@ { if(!popup) { /* create only once! */ item_factory = gtk_item_factory_new (GTK_TYPE_MENU, "
", NULL); + gtk_item_factory_set_translate_func (item_factory, translate_func, NULL, NULL); gtk_item_factory_create_items (item_factory, nmenu_items, popupmenu_items, @@ -321,7 +336,7 @@ GtkWidget *menubar; GtkListStore *clocklistModel; GtkWidget *clocklist; - gchar *titles[2] = { "Time Zone", "Time&Date" }; + gchar *titles[2] = { N_("Time Zone"), N_("Time&Date") }; GtkCellRenderer *renderer; GtkTreeViewColumn *column; GtkTreeSelection *select; @@ -333,6 +348,9 @@ gtk_init (&argc, &argv); GetOptions(argc,argv); + bindtextdomain(PACKAGE_NAME, LOCALEDIR); + bind_textdomain_codeset (PACKAGE_NAME, "UTF-8"); + textdomain(PACKAGE_NAME); window = gtk_window_new (GTK_WINDOW_TOPLEVEL); gtk_signal_connect (GTK_OBJECT (window), "destroy", @@ -367,7 +385,7 @@ G_CALLBACK(registerReorderedRows), NULL); renderer = gtk_cell_renderer_text_new (); - column = gtk_tree_view_column_new_with_attributes (titles[0], + column = gtk_tree_view_column_new_with_attributes (gettext(titles[0]), renderer, "text", TZ_DESCRIPTION, NULL); @@ -377,7 +395,7 @@ gtk_tree_view_append_column (GTK_TREE_VIEW (clocklist), column); renderer = gtk_cell_renderer_text_new (); - column = gtk_tree_view_column_new_with_attributes (titles[1], + column = gtk_tree_view_column_new_with_attributes (gettext(titles[1]), renderer, "text", TZ_TIMEDATE, NULL); diff -ruN gworldclock-1.1-orig/main.h gworldclock-1.1/main.h --- gworldclock-1.1-orig/main.h 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/main.h 2003-07-22 07:10:24.000000000 +0900 @@ -45,29 +45,30 @@ GdkEventButton *event, gpointer selection); +#define N_(A) A static GtkItemFactoryEntry mainmenu_items[] = { - { "/_File", NULL, NULL, 0, "" }, + { N_("/_File"), NULL, NULL, 0, "" }, /* { "/File/_Open Zones", NULL, NULL, 0, NULL },*/ /* don't allow zones to be saved via Ctrl-S, in order to keep accidental changes from being saved */ - { "/File/_Save Zones", NULL, (void *)SaveZones, 0, NULL }, + { N_("/File/_Save Zones"), NULL, (void *)SaveZones, 0, NULL }, /* { "/File/Save Zones _As", NULL, NULL, 0, NULL },*/ - { "/File/_Quit", "Q", send_clock_quit, 0, NULL }, - { "/_Options", NULL, NULL, 0, "" }, - { "/Options/_Add Timezone", "A", AddZone, 0, NULL }, - { "/Options/_Delete Timezone", "D", DeleteZone, 0, NULL }, - { "/Options/Change Description", NULL, ChangeZoneDescription, 0, NULL}, - { "/Options/Synchronise Time", NULL, Synchronise, 0, NULL}, - { "/_Help", NULL, NULL, 0, "" }, - { "/_Help/About", NULL, AboutDialog, 0, NULL } + { N_("/File/_Quit"), "Q", send_clock_quit, 0, NULL }, + { N_("/_Options"), NULL, NULL, 0, "" }, + { N_("/Options/_Add Timezone"), "A", AddZone, 0, NULL }, + { N_("/Options/_Delete Timezone"), "D", DeleteZone, 0, NULL }, + { N_("/Options/Change Description"), NULL, ChangeZoneDescription, 0, NULL}, + { N_("/Options/Synchronise Time"), NULL, Synchronise, 0, NULL}, + { N_("/_Help"), NULL, NULL, 0, "" }, + { N_("/_Help/About"), NULL, AboutDialog, 0, NULL } }; static GtkItemFactoryEntry popupmenu_items[] = { - { "/Synchronise Time", NULL, Synchronise, 0, NULL}, + { N_("/Synchronise Time"), NULL, Synchronise, 0, NULL}, /* setup "add zone" here to add at selected row! */ - { "/Add Timezone", NULL, AddZone, 0, NULL }, - { "/Delete Timezone", NULL, DeleteZone, 0, NULL}, - { "/Change Description", NULL, ChangeZoneDescription, 0, NULL} + { N_("/Add Timezone"), NULL, AddZone, 0, NULL }, + { N_("/Delete Timezone"), NULL, DeleteZone, 0, NULL}, + { N_("/Change Description"), NULL, ChangeZoneDescription, 0, NULL} }; #endif diff -ruN gworldclock-1.1-orig/mkinstalldirs gworldclock-1.1/mkinstalldirs --- gworldclock-1.1-orig/mkinstalldirs 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/mkinstalldirs 2003-07-26 12:45:22.000000000 +0900 @@ -12,18 +12,29 @@ # process command line arguments while test $# -gt 0 ; do - case "${1}" in - -h | --help | --h* ) # -h for help - echo "${usage}" 1>&2; exit 0 ;; - -m ) # -m PERM arg - shift - test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; } - dirmode="${1}" - shift ;; - -- ) shift; break ;; # stop option processing - -* ) echo "${usage}" 1>&2; exit 1 ;; # unknown option - * ) break ;; # first non-opt arg - esac + case $1 in + -h | --help | --h*) # -h for help + echo "$usage" 1>&2 + exit 0 + ;; + -m) # -m PERM arg + shift + test $# -eq 0 && { echo "$usage" 1>&2; exit 1; } + dirmode=$1 + shift + ;; + --) # stop option processing + shift + break + ;; + -*) # unknown option + echo "$usage" 1>&2 + exit 1 + ;; + *) # first non-opt arg + break + ;; + esac done for file @@ -36,64 +47,65 @@ done case $# in -0) exit 0 ;; + 0) exit 0 ;; esac case $dirmode in -'') - if mkdir -p -- . 2>/dev/null; then - echo "mkdir -p -- $*" - exec mkdir -p -- "$@" - fi ;; -*) - if mkdir -m "$dirmode" -p -- . 2>/dev/null; then - echo "mkdir -m $dirmode -p -- $*" - exec mkdir -m "$dirmode" -p -- "$@" - fi ;; + '') + if mkdir -p -- . 2>/dev/null; then + echo "mkdir -p -- $*" + exec mkdir -p -- "$@" + fi + ;; + *) + if mkdir -m "$dirmode" -p -- . 2>/dev/null; then + echo "mkdir -m $dirmode -p -- $*" + exec mkdir -m "$dirmode" -p -- "$@" + fi + ;; esac for file do - set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` - shift + set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'` + shift - pathcomp= - for d - do - pathcomp="$pathcomp$d" - case "$pathcomp" in - -* ) pathcomp=./$pathcomp ;; - esac - - if test ! -d "$pathcomp"; then - echo "mkdir $pathcomp" - - mkdir "$pathcomp" || lasterr=$? - - if test ! -d "$pathcomp"; then - errstatus=$lasterr - else - if test ! -z "$dirmode"; then - echo "chmod $dirmode $pathcomp" - - lasterr="" - chmod "$dirmode" "$pathcomp" || lasterr=$? - - if test ! -z "$lasterr"; then - errstatus=$lasterr - fi - fi - fi - fi + pathcomp= + for d + do + pathcomp="$pathcomp$d" + case $pathcomp in + -*) pathcomp=./$pathcomp ;; + esac + + if test ! -d "$pathcomp"; then + echo "mkdir $pathcomp" + + mkdir "$pathcomp" || lasterr=$? + + if test ! -d "$pathcomp"; then + errstatus=$lasterr + else + if test ! -z "$dirmode"; then + echo "chmod $dirmode $pathcomp" + lasterr="" + chmod "$dirmode" "$pathcomp" || lasterr=$? + + if test ! -z "$lasterr"; then + errstatus=$lasterr + fi + fi + fi + fi - pathcomp="$pathcomp/" - done + pathcomp="$pathcomp/" + done done exit $errstatus # Local Variables: # mode: shell-script -# sh-indentation: 3 +# sh-indentation: 2 # End: # mkinstalldirs ends here diff -ruN gworldclock-1.1-orig/po/ChangeLog gworldclock-1.1/po/ChangeLog --- gworldclock-1.1-orig/po/ChangeLog 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/po/ChangeLog 2003-07-22 07:00:22.000000000 +0900 @@ -0,0 +1,11 @@ +2003-07-22 gettextize + + * Makefile.in.in: New file, from gettext-0.12.1. + * Rules-quot: New file, from gettext-0.12.1. + * boldquot.sed: New file, from gettext-0.12.1. + * en@boldquot.header: New file, from gettext-0.12.1. + * en@quot.header: New file, from gettext-0.12.1. + * insert-header.sin: New file, from gettext-0.12.1. + * quot.sed: New file, from gettext-0.12.1. + * remove-potcdate.sin: New file, from gettext-0.12.1. + diff -ruN gworldclock-1.1-orig/po/Makefile.in.in gworldclock-1.1/po/Makefile.in.in --- gworldclock-1.1-orig/po/Makefile.in.in 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/po/Makefile.in.in 2003-07-26 12:47:23.000000000 +0900 @@ -0,0 +1,353 @@ +# Makefile for PO directory in any package using GNU gettext. +# Copyright (C) 1995-1997, 2000-2003 by Ulrich Drepper +# +# This file can be copied and used freely without restrictions. It can +# be used in projects which are not available under the GNU General Public +# License but which still want to provide support for the GNU gettext +# functionality. +# Please note that the actual code of GNU gettext is covered by the GNU +# General Public License and is *not* in the public domain. + +PACKAGE = @PACKAGE@ +VERSION = @VERSION@ + +SHELL = /bin/sh +@SET_MAKE@ + +srcdir = @srcdir@ +top_srcdir = @top_srcdir@ +VPATH = @srcdir@ + +prefix = @prefix@ +exec_prefix = @exec_prefix@ +datadir = @datadir@ +localedir = $(datadir)/locale +gettextsrcdir = $(datadir)/gettext/po + +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +MKINSTALLDIRS = @MKINSTALLDIRS@ +mkinstalldirs = $(SHELL) $(MKINSTALLDIRS) + +GMSGFMT = @GMSGFMT@ +MSGFMT = @MSGFMT@ +XGETTEXT = @XGETTEXT@ +MSGMERGE = msgmerge +MSGMERGE_UPDATE = @MSGMERGE@ --update +MSGINIT = msginit +MSGCONV = msgconv +MSGFILTER = msgfilter + +POFILES = @POFILES@ +GMOFILES = @GMOFILES@ +UPDATEPOFILES = @UPDATEPOFILES@ +DUMMYPOFILES = @DUMMYPOFILES@ +DISTFILES.common = Makefile.in.in remove-potcdate.sin \ +$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3) +DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \ +$(POFILES) $(GMOFILES) \ +$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3) + +POTFILES = \ + +CATALOGS = @CATALOGS@ + +# Makevars gets inserted here. (Don't remove this line!) + +.SUFFIXES: +.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-update + +.po.mo: + @echo "$(MSGFMT) -c -o $@ $<"; \ + $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@ + +.po.gmo: + @lang=`echo $* | sed -e 's,.*/,,'`; \ + test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ + echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \ + cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo + +.sin.sed: + sed -e '/^#/d' $< > t-$@ + mv t-$@ $@ + + +all: all-@USE_NLS@ + +all-yes: stamp-po +all-no: + +# stamp-po is a timestamp denoting the last time at which the CATALOGS have +# been loosely updated. Its purpose is that when a developer or translator +# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS, +# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent +# invocations of "make" will do nothing. This timestamp would not be necessary +# if updating the $(CATALOGS) would always touch them; however, the rule for +# $(POFILES) has been designed to not touch files that don't need to be +# changed. +stamp-po: $(srcdir)/$(DOMAIN).pot + test -z "$(CATALOGS)" || $(MAKE) $(CATALOGS) + @echo "touch stamp-po" + @echo timestamp > stamp-poT + @mv stamp-poT stamp-po + +# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update', +# otherwise packages like GCC can not be built if only parts of the source +# have been downloaded. + +# This target rebuilds $(DOMAIN).pot; it is an expensive operation. +# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed. +$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed + $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \ + --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \ + --files-from=$(srcdir)/POTFILES.in \ + --copyright-holder='$(COPYRIGHT_HOLDER)' \ + --msgid-bugs-address='$(MSGID_BUGS_ADDRESS)' + test ! -f $(DOMAIN).po || { \ + if test -f $(srcdir)/$(DOMAIN).pot; then \ + sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \ + sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \ + if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \ + rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \ + else \ + rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \ + mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ + fi; \ + else \ + mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \ + fi; \ + } + +# This rule has no dependencies: we don't need to update $(DOMAIN).pot at +# every "make" invocation, only create it when it is missing. +# Only "make $(DOMAIN).pot-update" or "make dist" will force an update. +$(srcdir)/$(DOMAIN).pot: + $(MAKE) $(DOMAIN).pot-update + +# This target rebuilds a PO file if $(DOMAIN).pot has changed. +# Note that a PO file is not touched if it doesn't need to be changed. +$(POFILES): $(srcdir)/$(DOMAIN).pot + @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \ + test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ + echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \ + cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot + + +install: install-exec install-data +install-exec: +install-data: install-data-@USE_NLS@ + if test "$(PACKAGE)" = "gettext-tools"; then \ + $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \ + for file in $(DISTFILES.common) Makevars.template; do \ + $(INSTALL_DATA) $(srcdir)/$$file \ + $(DESTDIR)$(gettextsrcdir)/$$file; \ + done; \ + for file in Makevars; do \ + rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ + done; \ + else \ + : ; \ + fi +install-data-no: all +install-data-yes: all + $(mkinstalldirs) $(DESTDIR)$(datadir) + @catalogs='$(CATALOGS)'; \ + for cat in $$catalogs; do \ + cat=`basename $$cat`; \ + lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ + dir=$(localedir)/$$lang/LC_MESSAGES; \ + $(mkinstalldirs) $(DESTDIR)$$dir; \ + if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \ + $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \ + echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \ + for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ + if test -n "$$lc"; then \ + if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ + link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ + mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ + for file in *; do \ + if test -f $$file; then \ + ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ + fi; \ + done); \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + else \ + if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ + :; \ + else \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + fi; \ + fi; \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ + ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ + ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \ + cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ + echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \ + fi; \ + done; \ + done + +install-strip: install + +installdirs: installdirs-exec installdirs-data +installdirs-exec: +installdirs-data: installdirs-data-@USE_NLS@ + if test "$(PACKAGE)" = "gettext-tools"; then \ + $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \ + else \ + : ; \ + fi +installdirs-data-no: +installdirs-data-yes: + $(mkinstalldirs) $(DESTDIR)$(datadir) + @catalogs='$(CATALOGS)'; \ + for cat in $$catalogs; do \ + cat=`basename $$cat`; \ + lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ + dir=$(localedir)/$$lang/LC_MESSAGES; \ + $(mkinstalldirs) $(DESTDIR)$$dir; \ + for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \ + if test -n "$$lc"; then \ + if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \ + link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \ + mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \ + for file in *; do \ + if test -f $$file; then \ + ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \ + fi; \ + done); \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \ + else \ + if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \ + :; \ + else \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \ + mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \ + fi; \ + fi; \ + fi; \ + done; \ + done + +# Define this as empty until I found a useful application. +installcheck: + +uninstall: uninstall-exec uninstall-data +uninstall-exec: +uninstall-data: uninstall-data-@USE_NLS@ + if test "$(PACKAGE)" = "gettext-tools"; then \ + for file in $(DISTFILES.common) Makevars.template; do \ + rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \ + done; \ + else \ + : ; \ + fi +uninstall-data-no: +uninstall-data-yes: + catalogs='$(CATALOGS)'; \ + for cat in $$catalogs; do \ + cat=`basename $$cat`; \ + lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \ + for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \ + rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \ + done; \ + done + +check: all + +info dvi ps pdf html tags TAGS ctags CTAGS ID: + +mostlyclean: + rm -f remove-potcdate.sed + rm -f stamp-poT + rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po + rm -fr *.o + +clean: mostlyclean + +distclean: clean + rm -f Makefile Makefile.in POTFILES *.mo + +maintainer-clean: distclean + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." + rm -f stamp-po $(GMOFILES) + +distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) +dist distdir: + $(MAKE) update-po + @$(MAKE) dist2 +# This is a separate target because 'update-po' must be executed before. +dist2: $(DISTFILES) + dists="$(DISTFILES)"; \ + if test "$(PACKAGE)" = "gettext-tools"; then \ + dists="$$dists Makevars.template"; \ + fi; \ + if test -f $(srcdir)/ChangeLog; then \ + dists="$$dists ChangeLog"; \ + fi; \ + for i in 0 1 2 3 4 5 6 7 8 9; do \ + if test -f $(srcdir)/ChangeLog.$$i; then \ + dists="$$dists ChangeLog.$$i"; \ + fi; \ + done; \ + if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \ + for file in $$dists; do \ + if test -f $$file; then \ + cp -p $$file $(distdir); \ + else \ + cp -p $(srcdir)/$$file $(distdir); \ + fi; \ + done + +update-po: Makefile + $(MAKE) $(DOMAIN).pot-update + test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES) + $(MAKE) update-gmo + +# General rule for updating PO files. + +.nop.po-update: + @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \ + if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \ + tmpdir=`pwd`; \ + echo "$$lang:"; \ + test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \ + echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \ + cd $(srcdir); \ + if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \ + if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ + rm -f $$tmpdir/$$lang.new.po; \ + else \ + if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ + :; \ + else \ + echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ + exit 1; \ + fi; \ + fi; \ + else \ + echo "msgmerge for $$lang.po failed!" 1>&2; \ + rm -f $$tmpdir/$$lang.new.po; \ + fi + +$(DUMMYPOFILES): + +update-gmo: Makefile $(GMOFILES) + @: + +Makefile: Makefile.in.in $(top_builddir)/config.status @POMAKEFILEDEPS@ + cd $(top_builddir) \ + && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \ + $(SHELL) ./config.status + +force: + +# Tell versions [3.59,3.63) of GNU make not to export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff -ruN gworldclock-1.1-orig/po/Makevars gworldclock-1.1/po/Makevars --- gworldclock-1.1-orig/po/Makevars 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/po/Makevars 2003-07-22 07:02:40.000000000 +0900 @@ -0,0 +1,41 @@ +# Makefile variables for PO directory in any package using GNU gettext. + +# Usually the message domain is the same as the package name. +DOMAIN = $(PACKAGE) + +# These two variables depend on the location of this directory. +subdir = po +top_builddir = .. + +# These options get passed to xgettext. +XGETTEXT_OPTIONS = --keyword=_ --keyword=N_ + +# This is the copyright holder that gets inserted into the header of the +# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding +# package. (Note that the msgstr strings, extracted from the package's +# sources, belong to the copyright holder of the package.) Translators are +# expected to transfer the copyright for their translations to this person +# or entity, or to disclaim their copyright. The empty string stands for +# the public domain; in this case the translators are expected to disclaim +# their copyright. +COPYRIGHT_HOLDER = Drew Parsons + +# This is the email address or URL to which the translators shall report +# bugs in the untranslated strings: +# - Strings which are not entire sentences, see the maintainer guidelines +# in the GNU gettext documentation, section 'Preparing Strings'. +# - Strings which use unclear terms or require additional context to be +# understood. +# - Strings which make invalid assumptions about notation of date, time or +# money. +# - Pluralisation problems. +# - Incorrect English spelling. +# - Incorrect formatting. +# It can be your email address, or a mailing list address where translators +# can write to without being subscribed, or the URL of a web page through +# which the translators can contact you. +MSGID_BUGS_ADDRESS = + +# This is the list of locale categories, beyond LC_MESSAGES, for which the +# message catalogs shall be used. It is usually empty. +EXTRA_LOCALE_CATEGORIES = diff -ruN gworldclock-1.1-orig/po/POTFILES.in gworldclock-1.1/po/POTFILES.in --- gworldclock-1.1-orig/po/POTFILES.in 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/po/POTFILES.in 2003-07-26 16:18:37.000000000 +0900 @@ -0,0 +1,4 @@ +main.h +zones.c +main.c +sync.c \ ファイル末尾に改行がありません diff -ruN gworldclock-1.1-orig/po/Rules-quot gworldclock-1.1/po/Rules-quot --- gworldclock-1.1-orig/po/Rules-quot 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/po/Rules-quot 2003-07-26 12:47:23.000000000 +0900 @@ -0,0 +1,42 @@ +# Special Makefile rules for English message catalogs with quotation marks. + +DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot + +.SUFFIXES: .insert-header .po-update-en + +en@quot.po-update: en@quot.po-update-en +en@boldquot.po-update: en@boldquot.po-update-en + +.insert-header.po-update-en: + @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \ + if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \ + tmpdir=`pwd`; \ + echo "$$lang:"; \ + ll=`echo $$lang | sed -e 's/@.*//'`; \ + LC_ALL=C; export LC_ALL; \ + cd $(srcdir); \ + if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \ + if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \ + rm -f $$tmpdir/$$lang.new.po; \ + else \ + if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \ + :; \ + else \ + echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \ + exit 1; \ + fi; \ + fi; \ + else \ + echo "creation of $$lang.po failed!" 1>&2; \ + rm -f $$tmpdir/$$lang.new.po; \ + fi + +en@quot.insert-header: insert-header.sin + sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header + +en@boldquot.insert-header: insert-header.sin + sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header + +mostlyclean: mostlyclean-quot +mostlyclean-quot: + rm -f *.insert-header diff -ruN gworldclock-1.1-orig/po/boldquot.sed gworldclock-1.1/po/boldquot.sed --- gworldclock-1.1-orig/po/boldquot.sed 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/po/boldquot.sed 2003-07-26 12:47:23.000000000 +0900 @@ -0,0 +1,10 @@ +s/"\([^"]*\)"/\1/g +s/`\([^`']*\)'/\1/g +s/ '\([^`']*\)' / \1 /g +s/ '\([^`']*\)'$/ \1/g +s/^'\([^`']*\)' /\1 /g +s//""/g +s///g +s///g +s///g +s///g diff -ruN gworldclock-1.1-orig/po/en@boldquot.header gworldclock-1.1/po/en@boldquot.header --- gworldclock-1.1-orig/po/en@boldquot.header 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/po/en@boldquot.header 2003-07-26 12:47:23.000000000 +0900 @@ -0,0 +1,25 @@ +# All this catalog "translates" are quotation characters. +# The msgids must be ASCII and therefore cannot contain real quotation +# characters, only substitutes like grave accent (0x60), apostrophe (0x27) +# and double quote (0x22). These substitutes look strange; see +# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html +# +# This catalog translates grave accent (0x60) and apostrophe (0x27) to +# left single quotation mark (U+2018) and right single quotation mark (U+2019). +# It also translates pairs of apostrophe (0x27) to +# left single quotation mark (U+2018) and right single quotation mark (U+2019) +# and pairs of quotation mark (0x22) to +# left double quotation mark (U+201C) and right double quotation mark (U+201D). +# +# When output to an UTF-8 terminal, the quotation characters appear perfectly. +# When output to an ISO-8859-1 terminal, the single quotation marks are +# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to +# grave/acute accent (by libiconv), and the double quotation marks are +# transliterated to 0x22. +# When output to an ASCII terminal, the single quotation marks are +# transliterated to apostrophes, and the double quotation marks are +# transliterated to 0x22. +# +# This catalog furthermore displays the text between the quotation marks in +# bold face, assuming the VT100/XTerm escape sequences. +# diff -ruN gworldclock-1.1-orig/po/en@quot.header gworldclock-1.1/po/en@quot.header --- gworldclock-1.1-orig/po/en@quot.header 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/po/en@quot.header 2003-07-26 12:47:23.000000000 +0900 @@ -0,0 +1,22 @@ +# All this catalog "translates" are quotation characters. +# The msgids must be ASCII and therefore cannot contain real quotation +# characters, only substitutes like grave accent (0x60), apostrophe (0x27) +# and double quote (0x22). These substitutes look strange; see +# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html +# +# This catalog translates grave accent (0x60) and apostrophe (0x27) to +# left single quotation mark (U+2018) and right single quotation mark (U+2019). +# It also translates pairs of apostrophe (0x27) to +# left single quotation mark (U+2018) and right single quotation mark (U+2019) +# and pairs of quotation mark (0x22) to +# left double quotation mark (U+201C) and right double quotation mark (U+201D). +# +# When output to an UTF-8 terminal, the quotation characters appear perfectly. +# When output to an ISO-8859-1 terminal, the single quotation marks are +# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to +# grave/acute accent (by libiconv), and the double quotation marks are +# transliterated to 0x22. +# When output to an ASCII terminal, the single quotation marks are +# transliterated to apostrophes, and the double quotation marks are +# transliterated to 0x22. +# diff -ruN gworldclock-1.1-orig/po/gworldclock.pot gworldclock-1.1/po/gworldclock.pot --- gworldclock-1.1-orig/po/gworldclock.pot 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/po/gworldclock.pot 2003-07-26 16:20:25.000000000 +0900 @@ -0,0 +1,170 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR Drew Parsons +# This file is distributed under the same license as the PACKAGE package. +# FIRST AUTHOR , YEAR. +# +#, fuzzy +msgid "" +msgstr "" +"Project-Id-Version: PACKAGE VERSION\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2003-07-26 16:20+0900\n" +"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" +"Last-Translator: FULL NAME \n" +"Language-Team: LANGUAGE \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=CHARSET\n" +"Content-Transfer-Encoding: 8bit\n" + +#: main.h:50 +msgid "/_File" +msgstr "" + +#: main.h:54 +msgid "/File/_Save Zones" +msgstr "" + +#: main.h:56 +msgid "/File/_Quit" +msgstr "" + +#: main.h:57 +msgid "/_Options" +msgstr "" + +#: main.h:58 +msgid "/Options/_Add Timezone" +msgstr "" + +#: main.h:59 +msgid "/Options/_Delete Timezone" +msgstr "" + +#: main.h:60 +msgid "/Options/Change Description" +msgstr "" + +#: main.h:61 +msgid "/Options/Synchronise Time" +msgstr "" + +#: main.h:62 +msgid "/_Help" +msgstr "" + +#: main.h:63 +msgid "/_Help/About" +msgstr "" + +#: main.h:67 +msgid "/Synchronise Time" +msgstr "" + +#: main.h:69 +msgid "/Add Timezone" +msgstr "" + +#: main.h:70 +msgid "/Delete Timezone" +msgstr "" + +#: main.h:71 +msgid "/Change Description" +msgstr "" + +#: zones.c:35 +msgid "Delete Zone" +msgstr "" + +#: zones.c:36 +msgid "No zone chosen for deleting." +msgstr "" + +#: zones.c:126 +#, c-format +msgid "Could not create list: %s" +msgstr "" + +#: zones.c:172 zones.c:181 zones.c:253 +msgid "Read Zone Table" +msgstr "" + +#: zones.c:174 zones.c:255 +#, c-format +msgid "" +" Error reading zone table \"%s\": \n" +" %s \n" +"How very sad.\n" +msgstr "" + +#: zones.c:183 +#, c-format +msgid "" +" Error reading country table \"%s\": \n" +" %s \n" +"How very sad.\n" +msgstr "" + +#: zones.c:431 +msgid "Continents" +msgstr "" + +#: zones.c:432 +msgid "Countries" +msgstr "" + +#: zones.c:433 +msgid "Regions" +msgstr "" + +#: zones.c:593 +msgid "Add Time Zone" +msgstr "" + +#: zones.c:616 +msgid "Description" +msgstr "" + +#: zones.c:631 +msgid "TZ value" +msgstr "" + +#: zones.c:646 +msgid "Add Zone" +msgstr "" + +#: zones.c:656 sync.c:495 +msgid "Done" +msgstr "" + +#: zones.c:722 +msgid "No zone chosen for changing." +msgstr "" + +#: zones.c:732 +msgid "Change Zone Description" +msgstr "" + +#: main.c:144 +msgid "About gworldclock" +msgstr "" + +#: main.c:338 +msgid "Time Zone" +msgstr "" + +#: main.c:338 +msgid "Time&Date" +msgstr "" + +#: sync.c:386 +msgid "Date:" +msgstr "" + +#: sync.c:457 +msgid "Time:" +msgstr "" + +#: sync.c:488 +msgid "Update" +msgstr "" diff -ruN gworldclock-1.1-orig/po/insert-header.sin gworldclock-1.1/po/insert-header.sin --- gworldclock-1.1-orig/po/insert-header.sin 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/po/insert-header.sin 2003-07-26 12:47:23.000000000 +0900 @@ -0,0 +1,23 @@ +# Sed script that inserts the file called HEADER before the header entry. +# +# At each occurrence of a line starting with "msgid ", we execute the following +# commands. At the first occurrence, insert the file. At the following +# occurrences, do nothing. The distinction between the first and the following +# occurrences is achieved by looking at the hold space. +/^msgid /{ +x +# Test if the hold space is empty. +s/m/m/ +ta +# Yes it was empty. First occurrence. Read the file. +r HEADER +# Output the file's contents by reading the next line. But don't lose the +# current line while doing this. +g +N +bb +:a +# The hold space was nonempty. Following occurrences. Do nothing. +x +:b +} diff -ruN gworldclock-1.1-orig/po/ja.po gworldclock-1.1/po/ja.po --- gworldclock-1.1-orig/po/ja.po 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/po/ja.po 2003-07-26 16:21:23.000000000 +0900 @@ -0,0 +1,175 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) YEAR Drew Parsons +# This file is distributed under the same license as the PACKAGE package. +# Junichi Uekawa , 2003. +# +msgid "" +msgstr "" +"Project-Id-Version: gworldclock\n" +"Report-Msgid-Bugs-To: \n" +"POT-Creation-Date: 2003-07-26 16:20+0900\n" +"PO-Revision-Date: 2003-07-26 16:21+0900\n" +"Last-Translator: Junichi Uekawa \n" +"Language-Team: japanese\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=EUC-JP\n" +"Content-Transfer-Encoding: 8bit\n" + +#: main.h:50 +msgid "/_File" +msgstr "ファイル(_F)" + +#: main.h:54 +msgid "/File/_Save Zones" +msgstr "ゾーンを保存(_S)" + +#: main.h:56 +msgid "/File/_Quit" +msgstr "終了(_Q)" + +#: main.h:57 +msgid "/_Options" +msgstr "オプション(_O)" + +#: main.h:58 +msgid "/Options/_Add Timezone" +msgstr "タイムゾーンを追加(_A)" + +#: main.h:59 +msgid "/Options/_Delete Timezone" +msgstr "タイムゾーンを削除(_D)" + +#: main.h:60 +msgid "/Options/Change Description" +msgstr "解説を変更" + +#: main.h:61 +msgid "/Options/Synchronise Time" +msgstr "時間を同期" + +#: main.h:62 +msgid "/_Help" +msgstr "ヘルプ(_H)" + +#: main.h:63 +msgid "/_Help/About" +msgstr "このプログラムについて" + +#: main.h:67 +msgid "/Synchronise Time" +msgstr "時間を同期" + +#: main.h:69 +msgid "/Add Timezone" +msgstr "タイムゾーンを追加" + +#: main.h:70 +msgid "/Delete Timezone" +msgstr "タイムゾーンを削除" + +#: main.h:71 +msgid "/Change Description" +msgstr "説明を変更" + +#: zones.c:35 +msgid "Delete Zone" +msgstr "タイムゾーンを削除" + +#: zones.c:36 +msgid "No zone chosen for deleting." +msgstr "削除するタイムゾーンが選択されていません" + +#: zones.c:126 +#, c-format +msgid "Could not create list: %s" +msgstr "リストを作成できません: %s" + +#: zones.c:172 zones.c:181 zones.c:253 +msgid "Read Zone Table" +msgstr "ゾーンテーブルを読む" + +#: zones.c:174 zones.c:255 +#, c-format +msgid "" +" Error reading zone table \"%s\": \n" +" %s \n" +"How very sad.\n" +msgstr "" +"ゾーンテーブル \"%s\" を読み込むのにエラーが発生しました: \n" +" %s \n" +"残念です\n" + +#: zones.c:183 +#, c-format +msgid "" +" Error reading country table \"%s\": \n" +" %s \n" +"How very sad.\n" +msgstr "" +"国テーブル \"%s\" を読み込むのにエラーが発生しました: \n" +" %s \n" +"残念です\n" + +#: zones.c:431 +msgid "Continents" +msgstr "大陸" + +#: zones.c:432 +msgid "Countries" +msgstr "国" + +#: zones.c:433 +msgid "Regions" +msgstr "地域" + +#: zones.c:593 +msgid "Add Time Zone" +msgstr "タイムゾーンを追加" + +#: zones.c:616 +msgid "Description" +msgstr "説明" + +#: zones.c:631 +msgid "TZ value" +msgstr "タイムゾーン" + +#: zones.c:646 +msgid "Add Zone" +msgstr "タイムゾーンを追加" + +#: zones.c:656 sync.c:495 +msgid "Done" +msgstr "完了" + +#: zones.c:722 +msgid "No zone chosen for changing." +msgstr "変更のためにはゾーンは選択されていません" + +#: zones.c:732 +msgid "Change Zone Description" +msgstr "説明を変更" + +#: main.c:144 +msgid "About gworldclock" +msgstr "gworldclockについて" + +#: main.c:338 +msgid "Time Zone" +msgstr "タイムゾーン" + +#: main.c:338 +msgid "Time&Date" +msgstr "現在時刻" + +#: sync.c:386 +msgid "Date:" +msgstr "日付：" + +#: sync.c:457 +msgid "Time:" +msgstr "時間：" + +#: sync.c:488 +msgid "Update" +msgstr "更新" diff -ruN gworldclock-1.1-orig/po/quot.sed gworldclock-1.1/po/quot.sed --- gworldclock-1.1-orig/po/quot.sed 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/po/quot.sed 2003-07-26 12:47:23.000000000 +0900 @@ -0,0 +1,6 @@ +s/"\([^"]*\)"/\1/g +s/`\([^`']*\)'/\1/g +s/ '\([^`']*\)' / \1 /g +s/ '\([^`']*\)'$/ \1/g +s/^'\([^`']*\)' /\1 /g +s//""/g diff -ruN gworldclock-1.1-orig/po/remove-potcdate.sin gworldclock-1.1/po/remove-potcdate.sin --- gworldclock-1.1-orig/po/remove-potcdate.sin 1970-01-01 09:00:00.000000000 +0900 +++ gworldclock-1.1/po/remove-potcdate.sin 2003-07-26 12:46:22.000000000 +0900 @@ -0,0 +1,19 @@ +# Sed script that remove the POT-Creation-Date line in the header entry +# from a POT file. +# +# The distinction between the first and the following occurrences of the +# pattern is achieved by looking at the hold space. +/^"POT-Creation-Date: .*"$/{ +x +# Test if the hold space is empty. +s/P/P/ +ta +# Yes it was empty. First occurrence. Remove the line. +g +d +bb +:a +# The hold space was nonempty. Following occurrences. Do nothing. +x +:b +} diff -ruN gworldclock-1.1-orig/sync.c gworldclock-1.1/sync.c --- gworldclock-1.1-orig/sync.c 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/sync.c 2003-07-26 16:22:40.000000000 +0900 @@ -1,6 +1,8 @@ /* functions related to time zone synchronisation */ #include +#include +#define _(A) gettext(A) #include "main.h" #include "sync.h" @@ -383,7 +385,7 @@ line = gtk_hbox_new (FALSE, 1); set = gtk_hbox_new (FALSE, 1); - date = gtk_label_new("Date:"); + date = gtk_label_new(_("Date:")); gtk_box_pack_start(GTK_BOX(set), date, FALSE, FALSE, 0); gtk_widget_show( date ); @@ -454,7 +456,7 @@ line = gtk_hbox_new (FALSE, 1); set = gtk_hbox_new (FALSE, 1); - time = gtk_label_new("Time:"); + time = gtk_label_new(_("Time:")); gtk_box_pack_start(GTK_BOX(set), time, FALSE, FALSE, 0); gtk_widget_show( time ); @@ -485,14 +487,14 @@ line = gtk_hbox_new (TRUE, 1); /* button to set to new time (for those who dislike the return button */ - button = gtk_button_new_with_label("Update"); + button = gtk_button_new_with_label(_("Update")); gtk_box_pack_start(GTK_BOX(line), button, TRUE, FALSE, 0); gtk_signal_connect (GTK_OBJECT (button), "clicked", GTK_SIGNAL_FUNC (synchroniseTimes), (gpointer)clocklist); gtk_widget_show (button); /* button to close synchronisation, return to current time */ - button = gtk_button_new_with_label("Done"); + button = gtk_button_new_with_label(_("Done")); gtk_box_pack_start(GTK_BOX(line), button, TRUE, FALSE, 0); gtk_signal_connect (GTK_OBJECT (button), "clicked", GTK_SIGNAL_FUNC (unsynchronise), (gpointer)clocklist); diff -ruN gworldclock-1.1-orig/zones.c gworldclock-1.1/zones.c --- gworldclock-1.1-orig/zones.c 2003-04-05 22:44:49.000000000 +0900 +++ gworldclock-1.1/zones.c 2003-07-26 16:17:59.000000000 +0900 @@ -3,11 +3,15 @@ #include #include #include +#include #include "gworldclock.h" #include "zones.h" #include "misc.h" +#define _(A) gettext(A) + + void DeleteZone( gpointer clocklist ) { extern gint changed; @@ -28,8 +32,8 @@ } else { - title = g_string_new("Delete Zone"); - msg = g_string_new("No zone chosen for deleting."); + title = g_string_new(_("Delete Zone")); + msg = g_string_new(_("No zone chosen for deleting.")); showMessageDialog( msg->str, GTK_MESSAGE_WARNING ); g_string_free(msg,TRUE); g_string_free(title,TRUE); @@ -119,7 +123,7 @@ entry = g_malloc0(sizeof(NameCodeType)); if(!entry) - g_print("Could not create list: %s",g_strerror(errno)); + g_print(_("Could not create list: %s"),g_strerror(errno)); entry->name = g_strdup(name); entry->code = g_strdup(code); List = g_slist_append(List, (gpointer)entry); @@ -165,18 +169,18 @@ return NULL; if ( !(fpz=fopen(ZONE_TABLE,"r")) ) { - title = g_string_new("Read Zone Table"); + title = g_string_new(_("Read Zone Table")); msg = g_string_new(NULL); - g_string_sprintf(msg," Error reading zone table \"%s\": \n %s \nHow very sad.\n", + g_string_sprintf(msg,_(" Error reading zone table \"%s\": \n %s \nHow very sad.\n"), ZONE_TABLE , g_strerror(errno) ); showMessageDialog( msg->str, GTK_MESSAGE_ERROR ); g_string_free(msg,TRUE); g_string_free(title,TRUE); } if ( !(fpc=fopen(COUNTRY_TABLE,"r")) ) { - title = g_string_new("Read Zone Table"); + title = g_string_new(_("Read Zone Table")); msg = g_string_new(NULL); - g_string_sprintf(msg," Error reading country table \"%s\": \n %s \nHow very sad.\n", + g_string_sprintf(msg,_(" Error reading country table \"%s\": \n %s \nHow very sad.\n"), COUNTRY_TABLE , g_strerror(errno) ); showMessageDialog( msg->str, GTK_MESSAGE_ERROR ); g_string_free(msg,TRUE); @@ -246,9 +250,9 @@ return NULL; if ( !(fp=fopen(ZONE_TABLE,"r")) ) { - title = g_string_new("Read Zone Table"); + title = g_string_new(_("Read Zone Table")); msg = g_string_new(NULL); - g_string_sprintf(msg," Error reading zone table \"%s\": \n %s \nHow very sad.\n", + g_string_sprintf(msg, _(" Error reading zone table \"%s\": \n %s \nHow very sad.\n"), ZONE_TABLE , g_strerror(errno) ); showMessageDialog( msg->str, GTK_MESSAGE_ERROR ); g_string_free(msg,TRUE); @@ -424,9 +428,9 @@ GtkWidget *label; GtkWidget *scrolled_window; GtkWidget *continentCList, *countryCList, *regionCList; - gchar *ContinentLabel="Continents"; - gchar *CountryLabel="Countries"; - gchar *RegionLabel="Regions"; + gchar *ContinentLabel=_("Continents"); + gchar *CountryLabel=_("Countries"); + gchar *RegionLabel=_("Regions"); gchar *rowdata[1]; gint row, i; @@ -586,7 +590,7 @@ NewZone.TZEntry = (GtkWidget *) EntryTZ; window = gtk_window_new(GTK_WINDOW_TOPLEVEL); - gtk_window_set_title ((GtkWindow *)window, "Add Time Zone"); + gtk_window_set_title ((GtkWindow *)window, _("Add Time Zone")); gtk_window_position((GtkWindow *)window,GTK_WIN_POS_CENTER); gtk_container_set_border_width (GTK_CONTAINER (window), 5); @@ -609,7 +613,7 @@ /* box for text description of zone */ - Frame = gtk_frame_new ("Description"); + Frame = gtk_frame_new (_("Description")); gtk_frame_set_shadow_type( (GtkFrame *)Frame, GTK_SHADOW_NONE); gtk_box_pack_start (GTK_BOX (hbox), Frame, TRUE, FALSE, 5); gtk_widget_show (Frame); @@ -624,7 +628,7 @@ /* box for TZ value of zone */ - Frame = gtk_frame_new ("TZ value"); + Frame = gtk_frame_new (_("TZ value")); gtk_frame_set_shadow_type( (GtkFrame *)Frame, GTK_SHADOW_NONE); gtk_box_pack_start (GTK_BOX (hbox), Frame, TRUE, FALSE, 5); gtk_widget_show (Frame); @@ -639,7 +643,7 @@ gtk_box_pack_start (GTK_BOX (vbox), hbox, TRUE, FALSE, 5); gtk_widget_show (hbox); - AddButton = gtk_button_new_with_label ("Add Zone"); + AddButton = gtk_button_new_with_label (_("Add Zone")); gtk_signal_connect (GTK_OBJECT (AddButton), "clicked", GTK_SIGNAL_FUNC (AddZoneToList), (gpointer)&NewZone ); gtk_box_pack_start (GTK_BOX (hbox), AddButton, TRUE, FALSE, 0); @@ -649,7 +653,7 @@ GTK_SIGNAL_FUNC (GotOK), (gpointer)AddButton); gtk_widget_show (AddButton); - DoneButton = gtk_button_new_with_label ("Done"); + DoneButton = gtk_button_new_with_label (_("Done")); gtk_signal_connect (GTK_OBJECT (DoneButton), "clicked", GTK_SIGNAL_FUNC (DestroyWindow), (gpointer)window); gtk_box_pack_start (GTK_BOX (hbox), DoneButton, TRUE, FALSE, 0); @@ -715,7 +719,7 @@ &selectedRowIter ) ) { /* is this dialog box useful? */ - showMessageDialog( "No zone chosen for changing.", GTK_MESSAGE_WARNING ); + showMessageDialog( _("No zone chosen for changing."), GTK_MESSAGE_WARNING ); return; } @@ -725,7 +729,7 @@ Zone.clocklist = (GObject *) clocklist; - window = gtk_dialog_new_with_buttons ( "Change Zone Description", + window = gtk_dialog_new_with_buttons ( _("Change Zone Description"), NULL, GTK_DIALOG_NO_SEPARATOR, "OK", OK_BUTTON,